The influence of the accuracy of reproducing the uniaxial tensile test of mild steel in the H–M plasticity model on the behaviour of a perforated thin walled shell subjected to compression
Open Access
- 17 June 2025
- journal article
- Published by Polish Academy of Sciences Chancellery in Archives of Civil Engineering
- p. 209-224
Abstract
The article describes the impact of modeling the plasticity constitutive relationship on the buckling of a short section of a perforated thin-walled steel bar with an open cross-section (modeled as a perforated shell) subjected to compression, being one of the elements of a high-storage system. Numerical calculations were performed in the ABAQUS/Standard program with application of the elasto-plasticity theory of large deformations with additive decomposition of the logarithmic strain tensor and taking into account the nonlinear isotropic or kinematic strain hardening models. The isotropic nature of the material was considered and the plastic flow law associated with the Huber-Mises plasticity condition was assumed. In the elasticity range, linear characteristics of the material was assumed, while in the plasticity range, the shape of the uniaxial strain hardening curve was described as piecewise linear approximation of plastic strain-stress graphs obtained from uniaxial tensile tests. The 24 sets of material data obtained on the basis of experimental tests were analyzed and the influence of differences in the values of material parameters were described (in tests carried out on samples cut from the modeled bars, large differences were found in the values of material parameters and the shape of uniaxial tension graphs). Also the accuracy of strain hardening modeling (the number of sections assumed in the model piecewise linear) on the calculated bearing capacity force value was considered and evaluated.Keywords
This publication has 17 references indexed in Scilit:
- Buckling state analysis of compressed composite plates with cut-outComposite Structures, 2021
- The Stability of the Thin-Walled Perforated Compressed Elements2021
- Elastic Buckling Solution for Perforated Thin-walled Channel Sections in Shear with an Aspect Ratio of 2.02019
- Application of digital image correlation system for analysis of local plastic instabilities of perforated thin-walled barsMATEC Web of Conferences, 2018
- Buckling resistance assessment of thin-walled open section element under pure compressionMATEC Web of Conferences, 2016
- On the Resistance Evaluation of Lateral-torsional Buckling of Bisymmetrical I-section Beams Using Finite Element SimulationsProcedia Engineering, 2016
- Design of Steel Structures2015
- Buckling mode identification of perforated thin-walled members by using GBT and shell FEAThin-Walled Structures, 2014
- Cold‐Formed Steel Design2010
- Computational Methods for Plasticity2008