CACezary Ajdukiewicz

Cezary Ajdukiewicz

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cezary Ajdukiewicz has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The influence of the accuracy of reproducing the uniaxial tensile test of mild steel in the H–M plasticity model on the behaviour of a perforated thin walled shell subjected to compression

    by Andrzej Piotrowski, Marcin Gajewski, Stanisław Jemioło, Cezary Ajdukiewicz

    The article describes the impact of modeling the plasticity constitutive relationship on the buckling of a short section of a perforated thin-walled steel bar with an open cross-section (modeled as a perforated shell) subjected to compression, being one of the elements of a high-storage system. Numerical calculations were performed in the ABAQUS/Standard program with application of the elasto-plasticity theory of large deformations with additive decomposition of the logarithmic strain tensor and taking into account the nonlinear isotropic or kinematic strain hardening models. The isotropic nature of the material was considered and the plastic flow law associated with the Huber-Mises plasticity condition was assumed. In the elasticity range, linear characteristics of the material was assumed, while in the plasticity range, the shape of the uniaxial strain hardening curve was described as piecewise linear approximation of plastic strain-stress graphs obtained from uniaxial tensile tests. The 24 sets of material data obtained on the basis of experimental tests were analyzed and the influence of differences in the values of material parameters were described (in tests carried out on samples cut from the modeled bars, large differences were found in the values of material parameters and the shape of uniaxial tension graphs). Also the accuracy of strain hardening modeling (the number of sections assumed in the model piecewise linear) on the calculated bearing capacity force value was considered and evaluated.

  • Open Access

    Full-Range Moment–Curvature Relationships for Beams Made of Low-Hardening Aluminium Alloys

    by Aleksander Szwed, Inez Kamińska, Cezary Ajdukiewicz

    Aluminium alloys are characterised by a rounded stress–strain relationship, with no sharply defined yield point. For example, aluminium alloy grades 6061-T6, 6082-T6, and 7075-T6 exhibit low-hardening response, which is close to linear elastic-linear plastic hardening characteristics. Commonly, the behaviour of aluminium alloys is described by Ramberg–Osgood (RO) one-dimensional constitutive relationship in the format of strain in terms of stress. In the case of low-hardening response, an alternative Richard–Abbott (RA) relationship of stress as a function of strain can be used. Both relations are analytically irreversible, but the RA is more appropriate for use in slender beams theory. In the present study, we use the latter function to derive moment as an explicit function of curvature for the sectional relation of beams. Since the obtained relation is expressed via special functions, we also propose its close approximation, which is more useful for practical purposes. It is uncomplicated and reasonably accurate compared to available models. The predictive capabilities of the new moment–curvature models developed in this article are verified with experimental results available in the literature for beams tested under four-point and three-point bending. In the case of four-point beams, predictions show very good agreement with experiments, while for three-point bending of beams, higher discrepancies are observed.


  • Open Access

    Estimation of Post-Cracking Dissipation Capabilities of Fiber Reinforced Concretes in Three Point Bending Test Monitored with Application of Digital Image Correlation System

    by Duyen Trinh-Duc, Andrzej Piotrowski, Cezary Ajdukiewicz, Piotr Woyciechowski, Marcin Gajewski

    Concretes with dispersed reinforcement are increasingly used in structural engineering. The basic source of knowledge on their application and design are the Model-Code 2010 guidelines. These guidelines, however, apply mainly to steel rebar reinforcement and are not fully sufficient in the analysis of the load-bearing capacity of elements made of concrete with dispersed reinforcement. Therefore, scientific research in this field is carried out continuously. The main goal of our work is to provide experimental data for the calibration of constitutive models of the cracking mechanics of concrete with reinforcement in the form of steel and polypropylene fibers. This article shows the possibility of using the digital image correlation system (DIC) to achieve this goal. The method of sample preparation and the method of conducting the tests were modeled on the recommendations contained in the PN-EN 14651: 2007 standard. The tests were carried out on prismatic elements with a notch loaded in a three-point bending setup. The results of standard strength tests are presented in the form of column graphs and tables. As an extension, the results of calculations of energy dissipated in fracture process are given. Moreover, the experimentally obtained graphs of the relationship between the force, displacement and crack opening were presented, which were supplemented with the images of crack development obtained with the use of DIC. The development of the crack net is characterized not only qualitatively but also quantitatively as a function of deflection or crack mouth opening displacement. Conclusions concerning the adopted research methodology and the tested materials are presented at the end of the article.


  • Open Access

    Verification of the Thin-walled Beam Theory with Application of FEM and Shell Modelling

    by Cezary Ajdukiewicz, Marcin Gajewski

    This article presents the results of a systematic comparison of predictions of the thin-walled beam theory and shell theory in the context of bending of elastic thin-walled beams with an open or closed cross-section. The results for shell theory were obtained using FEM and the ABAQUS/Standard program. The bending task of the thin-walled beam was decomposed into the task with a symmetrical and anti-symmetrical loading, so that the bending and torsion of the thin-walled element would be better visible. In order to objectify the comparison, two coefficients characterizing the mutual similarity of functions were introduced: root mean square deviation coefficient determined for the selected cross-section (in relation to the entire contour) and a coefficient determining the maximum relative difference of a given quantity. The comparison was made for both the stress and the displacement state.


  • Open Access

    Application of digital image correlation system for analysis of local plastic instabilities of perforated thin-walled bars

    by Andrzej Piotrowski, Marcin Gajewski, Cezary Ajdukiewicz

    In the presented paper the local instabilities occurring in compression test of perforated thin-walled bars of low slenderness are observed using digital image correlation system ARAMIS. The tested samples slenderness is so low, that from theoretical point of view we are dealing with compression tests of some perforated shells. The samples are made from typical low carbon steel, which has to be treated as elasto-plastic material. Because of that, the final geometry of the sample (after unloading) is also analysed giving a good data for calibration of the theory of elasto-plasticity for large deformations. In analysed cases the total strain values are not exceptionally large, while local rotation (and permanent deformations) have significant values.


  • Verification of Plasticity Theory with Isotropic Hardening and Additive Decomposition of Left Deformation Tensor Using Digital Image Correlation System

    by Marcin Gajewski, Cezary Ajdukiewicz, Andrzej Piotrowski

    The development of measurement methods, and in particular digital image correlation (DIC) systems, which are designed to measure of entire displacements and deformations fields, opens up new areas of research. In general, the materials constitutive relations are formulated in such a way that material parameters could be determined with relatively simple experimental tests carried out on samples with uniform (approximately) stress and strain fields. Then it is possible to apply them to complex boundary value problems formulated e.g. in the small or large deformation theories. The application of DIC allows to verify the accuracy of their predictions by comparing the results of the experiment with solutions to boundary value problems obtained using the finite element method (FEM).


  • Experimental Study on Mechanical Properties of Polyethylene HDPE in Conditions of Hydraulic Impact Simulation

    by Szymon Imiełowski, Apoloniusz Kodura, Aniela Glinicka, Cezary Ajdukiewicz

    Experimental research on mechanical properties of hardened polyethylene HDPE, is developed in the paper. The conditions of hydraulic impact simulation, caused by sudden opening or closing of the valve or by working pomp were adopted in the model. The created in such conditions shock wave moves at a high speed causing additional dangerous dynamic loadings, which lead to faster pipe wear process. The aim of this study is to determine Young's modulus of the pipe material in the cyclic load conditions. The assumed amplitude and frequency of the applied load relates to variation of the impact wave pressure also the speed of the disturbances propagation are taken from experimental measurement of the real water hammer. The measured Young's modulus is higher than that obtained from a static tensile test. The presented study arises from the need to verify the actual value of pipe material mechanical properties, i.e. longitudinal stiffness, for designing of hydraulic pipes under conditions of water hammer.


  • Open Access

    Experimental buckling path of compressed bars under displacement control

    by Szymon Imiełowski, Aniela Glinicka, Cezary Ajdukiewicz

    Buckling and postcritical analysis of prismatic metal bars, including complex cycles of loading are considered in the paper. The postbuckling path analysis of bars loaded in the form of increasing displacements is discussed in detail. The results of experimental research are reported as a dependence of the force P versus lateral deflection f as well as total shortening of the rod u. It is stated that only the simultaneous analysis of both methods of presentation of results comprises a complete tool for developing the column response. Particularly, the response that appears in the first, linear elastic phase of loading can be observed on P-u diagrams. The increase of the compressing force causes visible shortening of the bar without its buckling. This important phenomenon is not usually included in stability considerations of prismatic rods.