STRUCTURE - PROPERTY - PROCESSING CORRELATIONS IN METASTABLE BETA TITANIUM ALLOYS Ti-10V-2Fe-3Al AND Ti-5Al-5Mo-5V-3Cr
Authors:
- 2 July 2021
- journal article
- research article
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 8 (sup3) , 1924-1959
Abstract
This paper describes the microstructure, texture and tensile properties of the two metastable β titanium alloys (Ti-10V-2Fe-3Al and Ti-5Al-5Mo-5V-3Cr). Both the alloys exhibit the single β (body centered cubic) phase in β solution treated and water quenched (β ST WQ) condition. The β ST WQ samples were aged at two different temperatures (550 and 750 °C) and different aging times (2, 4 and 6 hrs). The aging has resulted in different α phase morphologies of a phase precipitates. The sizes and volume fractions of the a phase increase and decrease with increase in aging temperature, respectively. The higher aging temperature (750 °C) results in precipitation free zones (PFZ) within the vicinity of prior β grain boundaries. The a phase texture is basal and it changes to non-basal with increase in aging time. The sharp a phase texture consists of {0001} || ND fibre with high intensity. The Vickers hardness values of both the alloys increase from β ST WQ to all aging temperatures due to precipitation hardening. The specimens aged at 550 °C have resulted in high strength in alloy Ti-1023. In contrast, 750 °C aged samples of both the alloys result in lower strength and moderate elongation values.Keywords
Funding Information
- Defence Research and Development Organisation (DRDO-DMRL)
- Defence Research and Development Organisation (DRDO-DMRL)
- Defence Research and Development Organisation (DRDO-DMRL)
- Defence Research and Development Organisation (DRDO-DMRL)
This publication has 17 references indexed in Scilit:
- Development of α precipitates in metastable Ti-5Al-5Mo-5V-3Cr and similar alloysMaterials Characterization, 2016
- Effect of Alloying Elements in Hot-Rolled Metastable β-Titanium Alloys. Part II: Mechanical PropertiesMetallurgical and Materials Transactions A, 2016
- β Phase decomposition in Ti–5Al–5Mo–5V–3CrActa Materialia, 2009
- The Flow Behavior and Microstructural Evolution of Ti-5Al-5Mo-5V-3Cr during Subtransus Isothermal ForgingMetallurgical and Materials Transactions A, 2009
- ω-Assisted nucleation and growth of α precipitates in the Ti–5Al–5Mo–5V–3Cr–0.5Fe β titanium alloyActa Materialia, 2009
- Development of chevron-shaped α precipitates in Ti–5Al–5Mo–5V–3CrScripta Materialia, 2009
- Thermomechanical processing of Ti–5Al–5Mo–5V–3CrMaterials Science and Engineering: A, 2008
- An overview on the use of titanium in the aerospace industryMaterials Science and Engineering: A, 1996
- Alloying element effects in metastable beta titanium alloysMetallurgical Transactions A, 1979
- A Direct Method of Determining Preferred Orientation of a Flat Reflection Sample Using a Geiger Counter X-Ray SpectrometerJournal of Applied Physics, 1949