Transverse load distribution of skew cast-in-place concrete multicell box - girder bridges subjected to traffic condition
Authors:
Open Access
- 1 March 2013
- journal article
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 10 (2) , 247-262
Abstract
Concrete multicell box-girder bridges are a common choice among the designers for various ranges of bridges. In order to provide safer and greater speed of traffic, the roadway is built as straight as possible. The use of skewed bridges has increased considerably in the recent years for roadway. The skewed bridges have quite different mechanical behavior from the straight bridges, although for skew angles less than 20 degrees, it is reasonably safe to ignore the effect of skew angles and analyze that at the straight bridge. In this study, in developing an analytical solution, an extensive parametric study was carried out to determine the maximum positive and negative stress distribution factors and to calculate the maximum distribution factor of deflection along the mid-span of skewed multicell box-girder bridges. A total of 240 representative bridges numerical models were selected and analyzed using SAP2000 finite element software. It was found that the span length, number of boxes, number of lanes and skew angles significantly affected the distribution factors of stress and deflection. Finally, several equations were proposed for stress and deflection distribution factors of multicell box-girder bridges for the application of American Association of State Highway and Transportation officials load and resistance factor design live loads.Keywords
This publication has 17 references indexed in Scilit:
- Live Load Distribution Formulas for Single-Span Prestressed Concrete Integral Abutment Bridge GirdersJournal of Bridge Engineering, 2009
- Quantification of intermediate diaphragm effects on load distributions of prestressed concrete girder bridgesPCI Journal, 2009
- Effect of Skewness on the Distribution of Live Load Reaction at Piers of Skewed Continuous BridgesJournal of Bridge Engineering, 2008
- Simplified Method for Calculating Lateral Distribution Factors for Live Load ShearJournal of Bridge Engineering, 2005
- Load Distribution for a Highly Skewed Bridge: Testing and AnalysisJournal of Bridge Engineering, 2004
- Live Load Distribution for Steel Girder BridgesJournal of Bridge Engineering, 2001
- Live-Load Distribution Factors in Prestressed Concrete Girder BridgesJournal of Bridge Engineering, 2001
- Shear and Reaction Distributions in Continuous Skew Composite BridgesJournal of Bridge Engineering, 1996
- Wheel Load Distribution on Simply Supported Skew I‐Beam Composite BridgesJournal of Structural Engineering, 1993
- Live‐Load Moments for Continuous Skew BridgesJournal of Structural Engineering, 1990