Assessment of the Influence of Intake Duct Geometrical Parameters on the Tumble Motion Generation in a Small Gasoline Engine
- 23 October 2012
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
During the last years the deep re-examination of the engine design for lowering engine emissions involved two-wheel vehicles too. The IC engine overall efficiency plays a fundamental role in determining final raw emissions. From this point of view, the optimization of the in-cylinder flow organization is mandatory. In detail, in SI engines the generation of a coherent tumble vortex having dimensions comparable to the engine stroke could be of primary importance to extend the engines' ignition limits toward the field of the dilute/lean mixtures.For motorbike and motor scooter applications, the optimization of the tumble generation is considered an effective way to improve the combustion system efficiency and to lower emissions, considering also that the two-wheels layout represents an obstacle in adopting the advanced post-treatment concepts designed for automotive applications.The aim of the paper is to use the 3D-CFD simulation tool to assess the intake duct geometry influence on the tumble motion generation during both the intake and the compression strokes. All the CFD simulations presented in the paper were performed on a SI 4-valve engine characterized by a unit displacement of 250 cm₃. The tumble structure was changed during the analysis by changing the angle set defining the intake port shape. The stroke-to-bore engine ratio was kept constant to 0.7. The effects of the tumble variations were evaluated on the in-cylinder vortex characteristic length and vorticity, and on the cylinder mean flow structure at IVC.3D-CFD simulations were performed by AVL-FIRE v.2010 CFD code.Keywords
This publication has 24 references indexed in Scilit:
- Numerical Comparative Analysis of In-Cylinder Tumble Flow Structures in Small PFI Engines Equipped by Heads Having Different Shapes and Squish Areas2012
- Establishing New Correlations Between In-Cylinder Charge Motion and Combustion Process in Gasoline Engines Through a Numerical DOESAE International Journal of Engines, 2010
- Steady and Transient CFD Approach for Port OptimizationSAE International Journal of Materials and Manufacturing, 2008
- Assessment of a zero‐dimensional model of tumble in four‐valve high performance engineInternational Journal of Numerical Methods for Heat & Fluid Flow, 2007
- Multidimensional Optimization of In-Cylinder Tumble Motion for the New Chrysler HemiSAE International Journal of Advances and Current Practices in Mobility, 2002
- A Parametric Approach to Spark-Ignition Engine Inlet-Port DesignSAE International Journal of Advances and Current Practices in Mobility, 1999
- Effect of Tumble Strength on Combustion and Exhaust Emissions in a Single-Cylinder, Four-Valve, Spark-Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 1998
- Effects of Intake Port Geometry on Large Scale In-Cylinder FlowsSAE International Journal of Advances and Current Practices in Mobility, 1998
- Up-Front Prediction of the Effects of Cylinder Head Design on Combustion Rates in SI EnginesSAE International Journal of Advances and Current Practices in Mobility, 1998
- Investigation of the In-Cylinder Tumble Motion In a Multi-Valve Engine: Effect of the Piston ShapeSAE International Journal of Advances and Current Practices in Mobility, 1997