Droplet size in a rectangular Venturi scrubber
Open Access
- 1 June 2004
- journal article
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Chemical Engineering
- Vol. 21 (2) , 335-343
Abstract
The Venturi scrubber is a device which uses liquid in the form of droplets to efficiently remove fine particulate matter from gaseous streams. Droplet size is of fundamental importance for the scrubber performance. In the present experimental study, a laser diffraction technique was used in order to measure droplet size in situ in a Venturi scrubber with a rectangular cross section. Droplet size distribution was measured as a function of gas velocity (58.3 to 74.9 m/s), liquid-to-gas ratio (0.07 to 0.27 l/m³), and distance from liquid injection point (64 to 173 mm). It was found that all these variables significantly affect droplet size. The results were compared with the predictions from correlations found in the literature.Keywords
This publication has 6 references indexed in Scilit:
- Drop size measurements in Venturi scrubbersChemical Engineering Science, 2001
- A comparative study of phase Doppler and laser diffraction techniques to investigate drop sizes in annular two-phase flowChemical Engineering Journal, 1998
- THEORETICAL STUDY OF NONUNIFORM DROPLETS CONCENTRATION DISTRIBUTION ON VENTURI SCRUBBER PERFORMANCEParticulate Science and Technology, 1996
- Measurement of drop sizesInternational Journal of Heat and Mass Transfer, 1979
- Mean Drop Size in a Full Scale Venturi Scrubber via TransmissometerJournal of the Air Pollution Control Association, 1974
- An Experiment on the Atomization of Liquid by means of an Air Stream (1. Report)Transactions of the Japan Society of Mechanical Engineers, 1938