Abstract
Tin oxide (SnO2) is the benchmark electron transport layer (ETL) for n-i-p emerging perovskite solar cells (PSCs). Sputtering offers a scalable, industry-compatible deposition method, providing excellent control and uniformity over large areas. However, sputtered SnO2 ETL often requires an additional passivation layer to ensure efficient charge collection. This work demonstrates that the optoelectronic properties of sputtered SnO2 strongly depend on oxygen partial pressure during deposition. Low oxygen (≤15%) passivates the interface with perovskite due to the presence of metallic Sn, increasing the open-circuit voltage (VOC). However, this comes at the cost of reduced fill-factor and short-circuit current densities (JSC) due to increased series resistance caused by -OH trap states. In contrast, higher oxygen content in the chamber (≥20%) reduces the series resistance and enhances JSC, but degrades the interfacial contact, lowering VOC. To overcome this trade-off, we design a bilayer sputtered-SnO2 ETL, comprising a 20 nm high-oxygen-content (25%) bulk layer for efficient electron transport, and a 5 nm low-oxygen-content (15%) interface layer to passivate surface defects. This bilayer strategy yields an enhanced power conversion efficiency (PCE), achieving 12.13%, compared to 5.50% and 9.72% for single-layer SnO2 deposited under 15% and 25% oxygen, respectively, for champion devices made under ambient conditions.

This publication has 38 references indexed in Scilit: