Characterization of elaborated Moroccan mullite to improving porous refractories quality
Open Access
- 1 December 2013
- journal article
- Published by FapUNIFESP (SciELO) in Cerâmica
- Vol. 59 (352) , 609-613
Abstract
Production of porous and light-weight bricks with acceptable flexural strength is accomplished. Sawdust was used as an additive to an earthenware brick to produce the pores. SEM-EDS, XRD and XRF analysis of the raw materials and the elaborated refractory were performed. Mixtures containing sawdust were prepared at different proportions (up to 30%). Apparent porosity at 1600 °C was investigated with the bulk density, water absorption, firing shrinkage and flexural strength. Microstructural investigation was carried out by both natural light microscopy and polarized light microscopy. The results obtained showed that the samples tested here maintained their shape without undergoing any deformation up to 1600 °C. The use of sawdust decreased the fired density of the bricks down to 1.24 g/cm³.Keywords
This publication has 8 references indexed in Scilit:
- Influence de la nature chimique et minéralogique des argiles et du processus de fabrication sur la qualité des carreaux céramiquesMATEC Web of Conferences, 2012
- Production of anorthite refractory insulating firebrick from mixtures of clay and recycled paper waste with sawdust additionCeramics International, 2012
- Thermal and mechanical properties of EPDM/PP + thermal shock-resistant ceramic compositesJournal of Materials Science, 2010
- The use of recycled paper processing residues in making porous brick with reduced thermal conductivityCeramics International, 2009
- Thermal stability of expanded perlite modified by mulliteCeramics International, 2009
- Microstructural and microchemical analysis of thecreep damage in mullite tested in flexureJournal of the European Ceramic Society, 2002
- XRD microstructural analysis of mullites obtained from kaolinite–alumina mixturesJournal of the European Ceramic Society, 2000
- Microstructural evolution and growth of crystallite size of mullite during thermal transformation of kyaniteJournal of the European Ceramic Society, 1997