High Power Thermally Regenerative Ammonia-Copper Redox Flow Battery Enabled by a Zero Gap Cell Design, Low-Resistant Membranes, and Electrode Coatings
- 20 April 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 3 (5) , 4787-4798
Abstract
Thermally regenerative batteries (TRBs) is an emerging platform for extracting electrical energy from low-grade waste heat (T < 130 °C). TRBs using an ammonia-copper redox couple can store waste-heat energy in a chemical form that can be later discharged to electrical energy upon demand. Previous thermally regenerative ammonia battery (TRAB) demonstrations suffered from poor heat to electrical energy conversion efficiency when benchmarked against TEGs. In this work, we report the highest power density to date for a TRAB (280 W m-2 at 55 °C) with a 5.7× improvement in power density over conventional TRAB designs. Notably, the TRAB was configured similar to a redox flow battery setup - which is termed here an ammonia flow battery (AFB). The substantial improvement in the AFB power density translated to thermal efficiency (ηth) values as high as 2.99 % and 37.9 % relative to the Carnot efficiency (ηth/C). These values correspond to an 87.6 % improvement in ηth value over conventional TRAB designs and the highest reported ηth/C for low-grade waste heat recovery using TRABs. The excellent performance of the AFB was ascribed to a zero gap design, deploying a low-resistant, inexpensive anion exchange membrane (AEM), and implementing a copper ion selective ionomer coating on the copper mesh electrodes. The high-power AFB in this report represents a significant milestone in harvesting low-grade waste heat.Keywords
Funding Information
- Louisiana State University
- Division of Engineering Education and Centers (1560305)
This publication has 25 references indexed in Scilit:
- Stable Elastomeric Anion Exchange Membranes Based on Quaternary Ammonium-Tethered Polystyrene-b-poly(ethylene-co-butylene)-b-polystyrene Triblock CopolymersMacromolecules, 2015
- Recent development and application of thermoelectric generator and coolerApplied Energy, 2015
- Enhancing Low‐Grade Thermal Energy Recovery in a Thermally Regenerative Ammonia Battery Using Elevated TemperaturesChemSusChem, 2015
- A thermally regenerative ammonia-based battery for efficient harvesting of low-grade thermal energy as electrical powerEnergy & Environmental Science, 2014
- An electrochemical system for efficiently harvesting low-grade heat energyNature Communications, 2014
- Harvesting Waste Thermal Energy Using a Carbon-Nanotube-Based Thermo-Electrochemical CellNano Letters, 2010
- On the structure–properties relationship of the AMV anion exchange membraneJournal of Membrane Science, 2009
- An inconvenient truth about thermoelectricsNature Materials, 2009
- Application of vacuum membrane distillation for ammonia removalJournal of Membrane Science, 2007
- Revised Pourbaix Diagrams for Copper at 25 to 300°CJournal of the Electrochemical Society, 1997