Laser Sealing for Vacuum Plate Glass with PbO-TiO2-SiO2-RxOy Solder
Open Access
- 13 April 2020
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 12 (8) , 3118
Abstract
Laser sealing for vacuum plate glass is a key step in developing the cost-effective smart vacuum-glass window for the drive towards net-zero energy buildings. In this paper, the pores, cracks, and interface with laser welding are analyzed in depth using PbO-TiO2-SiO2-RxOy system sealing solder to prepare vacuum flat glass. The microstructure of the sealing layer was analyzed by a BX41M-LED metallographic microscope, and the interfacial bonding characteristics were observed by thermal field emission scanning electron microscopy (SEM). The solder was analyzed by an energy spectrometer, and the influence of laser power, sealing temperature, and sealing speed on the gas holes and the crack sand interface separation of the sealing layer are reported. The results show that when the laser power reached 80 W at the welding speed of 2 mm/s, the bulk solder disappeared to most of the quantity and the sealing surface density was higher, due to which negligible pores and micro cracks were found. Thus, the sealing quality of the sealing layer is considered to be suitable when the temperature of 470 °C was maintained and the solder has 68.93% of Pb and 3.04% Si in the atom fraction to achieve the wet the glass substrate surface whilst improving the bonding quality.Keywords
Funding Information
- National Natural Science Foundation of China (51672241)
- Natural Science Foundation of Jiangsu Province (BK20170500)
- Natural Science Foundation of the Jiangsu Higher Education Institutions (18KJB460032)
- 14th batch High-level Talents Project for "Six Talents Peak" (XCL-092)
- Jiangsu Science and Technology Plan Project of China (BE2016134)
- Province Postdoctoral Foundation of Jiangsu (1501164B)
- Technical Innovation Nurturing Foundation of Yangzhou University (2017CXJ021, 2017CXJ024)
- China Postdoctoral Science Foundation (2016M600447)
- Yangzhou Foundation Innovation Project (YZ2017052, YZ2017279, YZ2017275)
- Yangzhou University College student Science Foundation Project (x20180290)
This publication has 12 references indexed in Scilit:
- Solar thermal performance of two innovative configurations of air-vacuum layered triple glazed windowsRenewable Energy, 2020
- Thermal performance analysis of a new structured-core translucent vacuum insulation panel in comparison to vacuum glazing: Experimental and theoretically validated analysesSolar Energy, 2020
- The Influence of Welding Process Parameters on Pore Formation in Pulsed Laser-Welded Vacuum Plate GlazingMaterials, 2019
- The influence of low-temperature surface induction on evacuation, pump-out hole sealing and thermal performance of composite edge-sealed vacuum insulated glazingRenewable Energy, 2019
- Effect of Cavity Vacuum Pressure Diminution on Thermal Performance of Triple Vacuum GlazingApplied Sciences, 2018
- Formation mechanism of sealing edge pores for vacuum glazing using laser brazing techniqueVacuum, 2018
- Predicting the solar energy and space-heating energy performance for solid-wall detached house retrofitted with the composite edge-sealed triple vacuum glazingEnergy Procedia, 2017
- Research on Interface Characteristic of Laser Welding Joints of Steel/Aluminum Dissimilar MaterialsJournal of Mechanical Engineering, 2017
- Laser Glass Frit Sealing for Encapsulation of Vacuum Insulation GlassesPhysics Procedia, 2014
- Experimental study on the sealing clearance between the labyrinth sealing displacer and cylinder in the 10 K G-M refrigeratorCryogenics, 2011