Postbuckling behavior of functionally graded CNT-reinforced nanocomposite plate with interphase effect
Open Access
- 22 May 2018
- journal article
- research article
- Published by Walter de Gruyter GmbH in Nonlinear Engineering
- Vol. 8 (1) , 496-512
Abstract
The present paper is aimed to study the buckling and postbuckling response of functionally graded carbon nanotube (FG-CNT)- magnesium (Mg) nanocomposite plate with interphase effect. Interphase zone is characterized by employing a cohesive zone model for its elastic modulus and thickness. An equivalent solid fiber (ESF) of CNT and interphase is modeled and dispersed into the matrix material by utilizing random sequential adsorption (RSA) technique. The effective elastic properties of the nanocomposite are computed by finite element method (FEM) based numerical homogenization technique. The obtained elastic properties of nanocomposite are utilized to investigate the buckling and post-buckling behaviour of different functionally graded (i.e., FG) nanocomposite plates modeled by varying the volume fraction of CNT/ESF along thickness direction, under in-plane compressive loads. The non-linear formulation is based on first-order shear deformation theory and von Karman’s assumptions. It is found that considering the interphase between CNT and Mg matrix would result in decrease in buckling load and postbuckling strength of FG-CNT-reinforced nanocomposite plate as compared to nanocomposite without interphase. It is also reported that the higher volume fraction of CNTs near top and bottom surfaces than the middle portion of nanocomposite plate provide better resistance to buckling and postbuckling.Keywords
This publication has 71 references indexed in Scilit:
- Buckling analysis of quadrilateral laminated plates with carbon nanotubes reinforced composite layersThin-Walled Structures, 2013
- Three-dimensional thermal buckling analysis of functionally graded arbitrary straight-sided quadrilateral plates using differential quadrature methodComposite Structures, 2011
- Evaluation of the Mechanical Properties of CNT Based Composites Using Hexagonal RVEJournal of Nanotechnology in Engineering and Medicine, 2010
- Modeling the influence of interphase on the elastic properties of carbon nanotube compositesComputational Materials Science, 2010
- On the tensile behavior of an embedded carbon nanotube in polymer matrix with non-bonded interphase regionComposite Structures, 2010
- Nonlinear bending of functionally graded carbon nanotube-reinforced composite plates in thermal environmentsComposite Structures, 2009
- Analysis of 3D random chopped fiber reinforced composites using FEM and random sequential adsorptionComputational Materials Science, 2008
- Modeling of the mechanical properties of nanoparticle/polymer compositesPolymer, 2005
- Buckling and post-buckling analysis of moderately thick laminated rectangular platesComputers & Structures, 1996
- Improved arc length orthogonality methods for nonlinear finite element analysisComputers & Structures, 1987