The Influence of the Electrolyte Nature and PEO Process Parameters on Properties of Anodized Ti-15Mo Alloy Intended for Biomedical Applications
Open Access
Abstract
Plasma electrolytic oxidation (PEO) of Ti-15Mo alloys conducted in electrolytes containing Ca and P compounds can be an efficient process with which to obtain bioactive coatings. This paper reports on the influence of the nature of the electrolyte, its concentration, and PEO process parameters on the properties of anodized layers on Ti-15Mo. A wide range of Ca- and P-containing alkaline and acidic solutions was employed to incorporate Ca and P ions into the anodized layer. The efficiency of the incorporation was evaluated by the Ca/P ratio in the coating as compared to that in the electrolyte. It was found that alkaline solutions are not suitable electrolytes for the formation of good quality, uniform PEO coatings. Only acidic electrolytes are appropriate for obtaining well-adherent homogeneous layers on Ti-15Mo. However, the maximum Ca/P ratios reached in the coatings were rather low (close to 1). The variation of electrical signal (negative-to-positive current ratio, frequency) and time of electrolysis do not result in a substantial change of this value. The processing time, however, did influence the coating thickness. Despite their low Ca/P ratio, the anodized layers demonstrate good biological activity, comparable to pure microrough titanium.Keywords
Funding Information
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (IZ73Z0_152399/1)
This publication has 20 references indexed in Scilit:
- Micro-arc oxidation as a tool to develop multifunctional calcium-rich surfaces for dental implant applicationsMaterials Science and Engineering: C, 2015
- Surface characterisation of Ti–15Mo alloy modified by a PEO process in various suspensionsMaterials Science and Engineering: C, 2014
- New Developments of Ti-Based Alloys for Biomedical ApplicationsMaterials, 2014
- Characterisation of bioactive films on Ti–6Al–4V alloyElectrochimica Acta, 2013
- Plasma electrolytic oxidation of a Ti–15Mo alloy in silicate solutionsMaterials Letters, 2013
- Titanium as a Reconstruction and Implant Material in Dentistry: Advantages and PitfallsMaterials, 2012
- Preliminary investigations on the anodic oxidation of Ti–13Nb–13Zr alloy in a solution containing calcium and phosphorusElectrochimica Acta, 2011
- Electrochemical behavior of Ti–Mo alloys applied as biomaterialCorrosion Science, 2008
- Titanium alloys for biomedical applicationsMaterials Science and Engineering: C, 2006
- Study of the Ca/P atomic ratio of the amorphous phase in plasma-sprayed hydroxyapatite coatingsJournal of Solid State Chemistry, 2003