A Proposed System for Temperature Measurement During Tensile Testing
Open Access
Abstract
Integration of thermographic imaging with in situ scanning electron microscopy (SEM) analysis may aid in quantifying thermal–mechanical behavior during tensile testing of 3D-printed polymers, which gives information about fracture mechanics, including the associated thermal phenomena. Upon fracture, samples exhibit changes in the thermal field, which is interesting because temperature fluctuations can affect material integrity. The paper introduces printing parameters to demonstrate a thermal measurement system’s sensitivity in detecting variations in mechanical response due to controlled changes in the process. Employing scientific methods, one can extrapolate results to a wider class of materials such as thermoplastics. Analysis of variance (ANOVA) is key in the design of experiments (DOE) if one wants to analyze the effect of factors and interactions. It has been used with the purpose of reducing the risk of type I errors (i.e., false positives). The finite element method (FEM) highlights temperature distribution in the area of interest and confirms recorded data. The particularly developed research experiments are carried out in a laboratory environment. Different samples are subjected to tensile tests under the evaluation of changes in the thermal field. SEM analysis is also widely used in fracture analysis to understand failure modes (ductile vs. brittle, crazing, delamination, and others). Thus, the paper aims to present a custom setup comprised a thermal camera pointed at samples during tensile testing that would serve as a reliable assessment system that accounts for the substitution of a sensor-based environment but is still fully capable of validating the measurement approach.Keywords
This publication has 20 references indexed in Scilit:
- Experimental and theoretical thermal performance analysis of additively manufactured polymer vacuum insulation panelsApplied Thermal Engineering, 2024
- Effect of in situ thermal treatment on interlayer adhesion of 3D printed polyetherimide (PEI) parts produced by fused deposition modeling (FDM)Materials Today Communications, 2024
- The effect of weak interface on the fracture behavior of material extrusion 3D-printed polyetherimideApplied Materials Today, 2023
- Mechanical properties and numerical simulation of FDM 3D printed PETG/carbon composite unit structuresJournal of Materials Research and Technology, 2023
- Evaluation of fracture properties of 3D printed high impact polystyrene according to essential work of fracture: Effect of raster angleAdditive Manufacturing, 2022
- Thermal conductive composites for FDM 3D printing: A review, opportunities and obstacles, future directionsJournal of Manufacturing Processes, 2022
- The influence of in-plane raster angle on tensile and fracture strengths of 3D-printed PLA specimensEngineering Fracture Mechanics, 2020
- Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based MaterialsJournal of Failure Analysis and Prevention, 2014
- 3-D thermal modelling applied to stress-induced anisotropy of thermal conductivityInternational Journal of Thermal Sciences, 2004
- On the revised theory of the thermoelastic effectJournal of Physics and Chemistry of Solids, 1988