Silver‐Alloyed Wide‐Bandgap (Ag,Cu)(In,Ga)S 2 Thin‐Film Solar Cells With 15.5% Efficiency
Open Access
- 22 March 2026
- journal article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 34 (7) , 942-956
Abstract
Sulfide chalcopyrite Cu(In,Ga)S 2 (CIGS) is a wide‐bandgap semiconductor suitable for the top cell of a tandem solar device. Here, we demonstrate significant improvements in absorber quality by alloying with Ag to form (Ag,Cu)(In,Ga)S 2 (ACIGS) absorbers. We report the Ag alloying effect on compositional, structural, and optoelectronic properties of absorbers. We demonstrate suppressed bulk recombination and improved carrier lifetime in ACIGS, as a result of improved grain size, porosity reduction, and defect passivation. We also show that Ag alloying flattens the Ga gradient. Consideration of this impact of Ag will be necessary in future engineering of the Ga profile to maximize charge carrier collection and avoid interface recombination. Exploiting the beneficial effects of Ag alloying, we report a wide‐bandgap (1.58 eV) ACIGS solar cell with a high power conversion efficiency of 15.5% and a large open‐circuit voltage ( V OC ) of 948 mV, improving on the reference pure CIGS solar cell, with an 11.2% efficiency and an 821 mV V OC . Ag alloying is a useful route to further increase the efficiency of CIGS solar cells and future tandem devices.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/V029231/1)
- Engineering and Physical Sciences Research Council (EP/R025193/1)
- Department of Forestry and Natural Resources, Purdue University (INTER/UKRI/20/15050982)
- European Commission (no. 101075626)
This publication has 76 references indexed in Scilit:
- CuIn (Se,Te)2 Absorbers With Bandgaps <1 eV for Bottom Cells in Tandem ApplicationsProgress in Photovoltaics: Research and Applications, 2024
- 3D and Multimodal X‐Ray Microscopy Reveals the Impact of Voids in CIGS Solar CellsAdvanced Science, 2023
- Diode Factor in Solar Cells with Metastable Defects and Back Contact RecombinationAdvanced Energy Materials, 2022
- Near surface defects: Cause of deficit between internal and external open‐circuit voltage in solar cellsProgress in Photovoltaics: Research and Applications, 2021
- Interconnection between Trait, Structure, and Composition of Grain Boundaries in Cu(In,Ga)Se2 Thin‐Film Solar CellsAdvanced Functional Materials, 2020
- Wide‐gap (Ag,Cu)(In,Ga)Se2 solar cells with different buffer materials—A path to a better heterojunctionProgress in Photovoltaics: Research and Applications, 2020
- Growth kinetics, properties, performance, and stability of atomic layer deposition Zn–Sn–O buffer layers for Cu(In,Ga)Se2 solar cellsProgress in Photovoltaics: Research and Applications, 2011
- Chalcogenide Photovoltaics2011
- Cu(In,Ga)Se2thin films grown with a Cu‐poor/rich/poor sequence: growth model and structural considerationsProgress in Photovoltaics: Research and Applications, 2003
- Properties of 19.2% efficiency ZnO/CdS/CuInGaSe2thin‐film solar cellsProgress in Photovoltaics: Research and Applications, 2003