Analysis of the Thermal and Catalytic Pyrolysis Process in the Regions of the Municipality of Belém Based on Socio-economic Classification
Authors:
- Fernanda Paula da Costa AssunçãoFAFernanda Paula da Costa Assunção
- Jéssica Cristina Conte Da SilvaJSJéssica Cristina Conte Da Silva
- Fernando Felipe Soares AlmeidaFAFernando Felipe Soares Almeida
- Marcelo Costa SantosMSMarcelo Costa Santos
- Simone Patrícia Aranha Da PazSPSimone Patrícia Aranha Da Paz
- Douglas Alberto Rocha de CastroDCDouglas Alberto Rocha de Castro
- Jorge Fernando Hungria FerreiraJFJorge Fernando Hungria Ferreira
- Neyson Martins MendonçaNMNeyson Martins Mendonça
- Mel Safira Cruz Do NascimentoMNMel Safira Cruz Do Nascimento
- José Almir Rodrigues PereiraJPJosé Almir Rodrigues Pereira
- Aline Christian Pimentel AlmeidaAAAline Christian Pimentel Almeida
- Sergio Duvoisin Jr.SJSergio Duvoisin Jr.
Preprint
- 21 October 2024
- preprint
- Published by MDPI AG in Preprints.org
Abstract
This work aims to evaluate the by-products obtained by thermal and catalytic pyroly-sis of the fraction (organic matter and paper) of municipal solid waste (MSW), in dif-ferent socioeconomic regions, through the yields of reaction products (bio-oil, bio-char, H2O and gas), acid value and chemical composition of bio-oils, and characteriza-tion of biochar, on a laboratory scale. The organic matter and paper segregated from the gravimetric composition of the total waste sample were subjected to drying, crushing and sieving pre-treatment. The experiments were carried out at 450 °C and 1.0 atmosphere, and at 400 °C and 475 °C and 1.0 atmosphere, using 10.0% (by mass) of the basic catalyst Ca(OH)2, in discontinuous mode. The bio-oil was characterized by acidity value and the chemical functions present in the bio-oil identified by FT-IR, NMR and composition by GC-MS. The biochar was characterized by SEM/EDS and XRD. The bio-oil yield increased with the addition of catalyst and the pyrolysis tem-perature. For catalytic pyrolysis, bio-char and gas yields increased slightly with Ca(OH)2 content, while bio-oil and H2O phase remained constant. GC-MS of the liquid reaction products identified the presence of hydrocarbons and oxygenates, as well as nitrogen-containing compounds, including amides and amines. The acidity of the bio-oil decreased with the addition of the basic catalyst in the process. The concentration of hydrocarbons in the bio-oil appeared with the addition of the catalyst in the catalyt-ic pyrolysis process as catalytic deoxygenation of fatty acid molecules occurs, through decarboxylation/decarbonylation, producing aliphatic and aromatic hydrocarbons, in-troducing the basic catalyst into the thermal process.Keywords
All Related Versions
- Version 1, 2024-10-21, Preprints
- Published version: Energies, 18 (17), 4532.
This publication has 70 references indexed in Scilit:
- A smart framework for municipal solid waste collection management: A case study in Greater Cairo RegionAin Shams Engineering Journal, 2023
- Calcium oxyhydroxide (CaO/Ca(OH)2) nanoparticles: Synthesis, characterization and evaluation of their capacity to degrade glyphosate-based herbicides (GBH)Advanced Powder Technology, 2021
- Slow pyrolysis of organic fraction of municipal solid waste (OFMSW): Characterisation of products and screening of the aqueous liquid product for anaerobic digestionApplied Energy, 2018
- Thermal behavior and kinetics of municipal solid waste during pyrolysis and combustion processApplied Thermal Engineering, 2016
- Pyrolysis of municipal solid waste in a fluidized bed for producing valuable pyrolytic oilsClean Technologies and Environmental Policy, 2016
- Comparision of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part I: Product yields, gas and pyrolysis oil propertiesBioresource Technology, 2013
- Review of fast pyrolysis of biomass and product upgradingBiomass and Bioenergy, 2012
- Influence of particle size on pyrolysis and gasification performance of municipal solid waste in a fixed bed reactorBioresource Technology, 2010
- Effect of catalyst additives on the production of biofuels from palm oil cracking in a transport riser reactorBioresource Technology, 2009
- Energy and environmental analysis of an innovative system based on municipal solid waste (MSW) pyrolysis and combined cycleApplied Thermal Engineering, 2008