NMNeyson Martins Mendonça

Neyson Martins Mendonça

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Neyson Martins Mendonça has a total of 77 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis of Thermal and Catalytic Pyrolysis Processes in Belém: A Socioeconomic Perspective

    by Fernanda Paula da Costa Assunção, Jéssica Cristina Conte da Silva, Fernando Felipe Soares Almeida, Marcelo Costa Santos, Simone Patrícia Aranha da Paz, Douglas Alberto Rocha de Castro, Jorge Fernando Hungria Ferreira, Neyson Martins Mendonça, Mel Safira Cruz Do Nascimento, José Almir Rodrigues Pereira, et al.

    This study aims to assess the by-products generated through the thermal and catalytic pyrolysis of the organic matter and paper fractions of municipal solid waste (MSW) in different socioeconomic regions, through the yields of reaction products (bio-oil, biochar, H2O, and gas), acid value and chemical composition of bio-oils, and characterization of biochar, on a laboratory scale. The organic matter and paper segregated from the gravimetric composition of the total waste sample were subjected to drying, crushing, and sieving pre-treatment. The experiments were carried out at 450 °C and 1.0 atmosphere, and at 400 °C and 475 °C and 1.0 atmosphere, using a basic catalyst, Ca(OH)2, at 10.0% by mass, in discontinuous mode. The bio-oil was characterized by acidity value and the chemical functions present in the bio-oil identified by FT-IR, NMR, and composition by GC-MS. The biochar was characterized by SEM/EDS and XRD. The bio-oil yield increased with the addition of the catalyst and the pyrolysis temperature. For catalytic pyrolysis, bio-char and gas yields increased slightly with the Ca(OH)2 content, while bio-oil and H2O phases remained constant. The GC-MS of the liquid reaction products identified the presence of hydrocarbons and oxygenates, as well as nitrogen-containing compounds, including amides and amines. The acidity of the bio-oil decreased with the addition of the basic catalyst in the process. The concentration of hydrocarbons in the bio-oil appeared with the addition of the catalyst in the catalytic pyrolysis process as the catalytic deoxygenation of fatty acid molecules occurred, through decarboxylation/decarbonylation, producing aliphatic and aromatic hydrocarbons, introducing the basic catalyst into the thermal process.


  • Open Access

    Process Analysis of Waste Animal Fat Pyrolysis and Fractional Distillation in Semi-Batch Reactors: Influence of Temperature and Reaction Time

    by Alex Lopes Valente, Marcelo Figueiredo Massulo Aguiar, Ana Claudia Fonseca Baia, Lauro Henrique Hamoy Guerreiro, Renan Marcelo Pereira Silva, Lucas Sabino Do Vale Scaff, Dilson Nazareno Pereira Cardoso, Hugo Fernando Meiguins da Silva, Davi Do Socorro Barros Brasil, Neyson Martins Mendonça, et al.

    Waste animal fat (WAF) can be converted to distillate fractions similar to petroleum solvents and used as solvents via pyrolysis and fractional distillation. Pyrolysis oil from triglyceride materials presents adequate viscosity and volatility, compared to petroleum fuels, but shows acid values between 60–140 mg KOH/g, impeding its direct use as biofuels without considerable purification of its distillates. Fractional distillation can be applied for the purification of bio-oil, but only a few studies accurately describe the process. The purpose of this study was to evaluate the effect of temperature in the conversion of waste animal fat into fuel-like fractions by pyrolysis and fractional distillation in a semi-batch stirred bed reactor (2 L) according to reaction time. Waste animal fat was extracted (rendering) from disposed meat cuts obtained from butcher shops and pyrolyzed in a stainless-steel stirred bed reactor operating in semi-batch mode at 400–500 °C. The obtained liquid fraction was separated according to reaction time. The pyrolysis bio-oil at 400 °C was separated into four distinct fractions (gasoline, kerosene, diesel, and heavy phase) by fractional distillation with reflux. The bio-oil and distillate fractions were analyzed by density, kinematic viscosity, acid value, and chemical composition by gas chromatography coupled to mass spectra (GC-MS). The results show that, for semi-batch reactors with no inert gas flow, higher temperature is associated with low residence time, reducing the conversion of fatty acids to hydrocarbons. The distillate fractions were tested in a common application not sensible to the fatty acid concentration as a diluent in the preparation of diluted asphalt cutback for the priming of base pavements in road construction. Kerosene and diesel fractions can be successfully applied in the preparation of asphalt cutbacks, even with a high acid value.


  • Open Access

    Analysis of the Thermal and Catalytic Pyrolysis Process in the Regions of the Municipality of Belém Based on Socio-economic Classification

    by Fernanda Paula da Costa Assunção, Jéssica Cristina Conte Da Silva, Fernando Felipe Soares Almeida, Marcelo Costa Santos, Simone Patrícia Aranha Da Paz, Douglas Alberto Rocha de Castro, Jorge Fernando Hungria Ferreira, Neyson Martins Mendonça, Mel Safira Cruz Do Nascimento, José Almir Rodrigues Pereira, et al.

    This work aims to evaluate the by-products obtained by thermal and catalytic pyroly-sis of the fraction (organic matter and paper) of municipal solid waste (MSW), in dif-ferent socioeconomic regions, through the yields of reaction products (bio-oil, bio-char, H2O and gas), acid value and chemical composition of bio-oils, and characteriza-tion of biochar, on a laboratory scale. The organic matter and paper segregated from the gravimetric composition of the total waste sample were subjected to drying, crushing and sieving pre-treatment. The experiments were carried out at 450 °C and 1.0 atmosphere, and at 400 °C and 475 °C and 1.0 atmosphere, using 10.0% (by mass) of the basic catalyst Ca(OH)2, in discontinuous mode. The bio-oil was characterized by acidity value and the chemical functions present in the bio-oil identified by FT-IR, NMR and composition by GC-MS. The biochar was characterized by SEM/EDS and XRD. The bio-oil yield increased with the addition of catalyst and the pyrolysis tem-perature. For catalytic pyrolysis, bio-char and gas yields increased slightly with Ca(OH)2 content, while bio-oil and H2O phase remained constant. GC-MS of the liquid reaction products identified the presence of hydrocarbons and oxygenates, as well as nitrogen-containing compounds, including amides and amines. The acidity of the bio-oil decreased with the addition of the basic catalyst in the process. The concentration of hydrocarbons in the bio-oil appeared with the addition of the catalyst in the catalyt-ic pyrolysis process as catalytic deoxygenation of fatty acid molecules occurs, through decarboxylation/decarbonylation, producing aliphatic and aromatic hydrocarbons, in-troducing the basic catalyst into the thermal process.

  • Open Access

    Thermochemical Transformation of Municipal Household Solid Waste Fractions into Bio-Oils and Bio-Adsorbents

    by Higor Ribeiro Borges, Fernanda Paula da Costa Assunção, Diogo Oliveira Pereira, Lauro Henrique Hamoy Guerreiro, Simone Patrícia Aranha Da Paz, Marcelo Costa Santos, Onésimo Amorim Corrêa, Jorge Fernando Hungria Ferreira, Douglas Alberto Rocha De Castro, Isaque Wilkson De Sousa Brandão, et al.

    This work aims to investigate the effect of process temperature and catalyst content by thermochemical degradation of municipal solid waste (MSW) fraction (organic matter + paper + plastic) on the yield of reaction products (bio-oil, biochar, H2O and gas), physi-cochemical properties and chemical composition of bio-oils, as well as on the morphol-ogy and crystalline phases of biochar in laboratory scale. The organic matter, paper and plastic segregated from the gravimetric composition of total waste sample were subject-ed to the pre-treatments of drying, crushing and sieving. Thermal pyrolysis was per-formed at 400, 450 and 475 °C and 1.0 atmosphere, and catalytic pyrolysis at 450°C and 1.0 atmosphere, using 5.0, 10.0 and 15.0% (wt.) of FCC zeolite, bath mode, using a laboratory-scale borosilicate glass reactor. The bio-oil was characterized for acidic val-ue. The chemical functions present in the bio-oil identified by FT-IR and the composi-tion by GC-MS. Biochar was characterized by SEM/EDS and XRD. Thermal pyrolysis of the MSW fraction shows bio-oil yields between 9.44 and 9.24% (wt), aqueous phase yields between 21.93 and 18.78% (wt), solid phase yields between 67.97 and 40.34% (wt) and gas yields between 28.27 and 5.92% (wt). The bio-oil yield decreased with in-creasing process temperature. For the experiments using FCC, the biochar and gas yields slightly increased with increasing FCC content, while that of bio-oil decreased and the H2O phase remained constant. GC-MS of bio-oils identified the presence of hy-drocarbons and oxygenates, as well as nitrogen-containing compounds including am-ides and amines. The acidity of the bio-oil increased with increasing temperature and with the aid of FCC as a catalyst. The presence of hydrocarbons in bio-oil was identified by the addition of FCC catalyst due to the deoxygenation of carboxylic acids, followed by decarboxylation and decarbonylation reactions, producing aliphatic and aromatic hydrocarbons.

  • Open Access

    Improving the Antioxidant Activity, Yield, and Hydrocarbon Content of Bio-Oil from the Pyrolysis of Açaí Seeds by Chemical Activation: Effect of Temperature and Molarity

    by Flávio Pinheiro Valois, Kelly Christina Alves Bezerra, Fernanda Paula da Costa Assunção, Lucas Pinto Bernar, Simone Patrícia Aranha da Paz, Marcelo Costa Santos, Waldeci Paraguassu Feio, Renan Marcelo Pereira Silva, Neyson Martins Mendonça, Douglas Alberto Rocha de Castro, et al.

    Biomass-derived products are a promising way to substitute the necessity for petroleum-derived products, since lignocellulosic material is widely available in our atmosphere and contributes to the reduction of greenhouse gases (GHGs), due to zero net emissions of CO2. This study explores the impact of temperature and molarity on the pyrolysis of açaí seeds (Euterpe oleracea, Mart.) activated with KOH and subsequently on the yield of bio-oil, hydrocarbon content of bio-oil, antioxidant activity of bio-oil, and chemical composition of the aqueous phase. The experiments were carried out at 350, 400, and 450 °C and 1.0 atmosphere, with 2.0 M KOH, and at 450 °C and 1.0 atmosphere, with 0.5 M, 1.0 M, and 2.0 M KOH, at laboratory scale. The composition of bio-oils and the aqueous phase were determined by GC-MS, while the acid value, a physicochemical property of fundamental importance in biofuels, was determined by AOCS methods. The antioxidant activity of bio-oils was determined by the TEAC method. The solid phase (biochar) was characterized by X-ray diffraction (XRD). The diffractograms identified the presence of Kalicinite (KHCO3) in biochar, and those higher temperatures favor the formation peaks of Kalicinite (KHCO3). The pyrolysis of açaí seeds activated with KOH show bio-oil yields from 3.19 to 6.79 (wt.%), aqueous phase yields between 20.34 and 25.57 (wt.%), solid phase yields (coke) between 33.40 and 43.37 (wt.%), and gas yields from 31.85 to 34.45 (wt.%). The yield of bio-oil shows a smooth exponential increase with temperature. The acidity of bio-oil varied between 12.3 and 257.6 mg KOH/g, decreasing exponentially with temperature, while that of the aqueous phase varied between 17.9 and 118.9 mg KOH/g, showing an exponential decay behavior with temperature and demonstrating that higher temperatures favor not only the yield of bio-oil but also bio-oils with lower acidity. For the experiments with KOH activation, the GC-MS of bio-oil identified the presence of hydrocarbons (alkanes, alkenes, cycloalkanes, cycloalkenes, and aromatics) and oxygenates (carboxylic acids, phenols, ketones, and esters). The concentration of hydrocarbons varied between 10.19 and 25.71 (area.%), increasing with temperature, while that of oxygenates varied between 52.69 and 72.15 (area.%), decreasing with temperature. For the experiments with constant temperature, the concentrations of hydrocarbons in bio-oil increased exponentially with molarity, while those of oxygenates decreased exponentially, showing that higher molarities favor the formation of hydrocarbons in bio-oil. The antioxidant activity of bio-oils decreases with increasing temperature, as the content of phenolic compounds decreases, and it decreases with increasing KOH molarity, as higher molarities favor the formation of hydrocarbons. Finally, it can be concluded that chemical activation of açaí seeds with KOH favors not only the yield of bio-oil but also the content of hydrocarbons. The study of process variables is of utmost importance in order to clearly assess reaction mechanisms, economic viability, and design goals that could be derived from chemically activated biomass pyrolysis processes. The study of the antioxidant properties of pyrolysis oils provides insight into new products derived from biomass pyrolysis.


  • Open Access

    Prediction of Leachate Characteristics via an Analysis of the Solubilized Extract of the Organic Fraction of Domestic Solid Waste from the Municipality of Belém, PA

    by Diogo Oliveira Pereira, Fernanda Paula da Costa Assunção, Jéssica Cristina Conte da Silva, Jorge Fernando Hungria Ferreira, Raise Brenda Pinheiro Ferreira, Ádila Lima Lola, Ísis Costa Pereira Do Nascimento, Jean Pinheiro Chaves, Mel Safira Cruz Do Nascimento, Thalia da Silva Gouvêa, et al.

    This work aimed to predict the physical–chemical characteristics of leachate according to the analysis of the solubilized extract from urban household solid waste (UHSW), on a laboratory scale, in the city of Belém/PA, Brazil. The neighborhoods where the waste was collected were sectorized based on geographic and socioeconomic data, with family income as the main parameter. After collection, the material was sent to the segregation area, where a gravimetric analysis of the UHSW was performed and fractions (paper, cardboard, Tetra Pak, rigid plastic, malleable plastic, metals, glass, organic matter, sanitary waste, fabrics and rejects) were segregated. After the gravimetric characterization, it was found that the highest average proportions were 55.57% organic matter, 14.26% sanitary waste and 9.97% malleable plastic. The organic fraction was selected and subjected to drying, crushing, sieving and packaging pretreatment, and then the solubilized extract of this fraction was obtained according to NBR No. 10.006/2004 of the Brazilian Association of Technical Standards. In the analyses of the solubilized extract, values for total nitrogen (201.80 to 359.90 mg·L−1), ammonia nitrogen (161 to 289 mg·L−1), nitrate (10 to 40 mg·L−1) and chemical oxygen demand were obtained (28,701 mg·L−1 to 38,608 mg·L−1), indicating the similarity of the waste solubilization conditions to those of leachate from landfills, in addition to being in noncompliance with environmental and health legislation, thus making it necessary to have an efficient waste management system, which avoids the release of waste into the environment that would result in environmental impacts similar to those of leachate contact with the environment.


  • Open Access

    Improving the Antioxidant Activity, Yield and Hydrocarbon Content of Bio-Oil from Açaí Seeds Pyrolysis by Chemical Activa-Tion: Effect of Temperature and Molarity

    by Flávio Pinheiro Valois, Gerson Valdez Daniel, Kelly Christina Alves Bezerra, Fernanda Paula da Costa Assunção, Sammy Jonatan Bremer, Lucas Pinto Bernar, Simone Patrícia Aranha Da Paz, Marcelo Costa Santos, Waldeci Paraguassu Feio, Renan Marcelo Pereira Silva, et al.

    This study explores the impact of temperature and molarity on the pyrolysis of Açaí seeds (Euterpe Oleraceae, Mart.) activated with KOH on the yield of bio-oil, hydrocarbon content of bio-oil, an-tioxidant activity of bio-oil and chemical composition of aqueous phase. The experiments were carried out at 350, 400, and 450 °C and 1.0 atmosphere, with 2.0 M KOH, and at 450 °C and 1.0 atmosphere, with 0.5 M, 1.0 M and 2.0 M KOH, in laboratory scale. The composition of bio-oils and aqueous phase determined by GC-MS, while the acid value, a physical-chemical property of fundamental importance in biofuels, of bio-oils and aqueous phases by AOCS methods. The an-tioxidant activity of bio-oils determined by the TEAC method. The solid phase (biochar) charac-terized by X-ray diffraction (XRD). The diffractograms identified the presence of Kalicinite (KHCO3) in biochar, and those higher temperatures favor the formation peaks of Kalicinite (KHCO3). The pyrolysis of Açaí seeds activated with KOH show bio-oil yields from 3.19 to 6.79 (wt.%), aqueous phase yields between 20.34 and 25.57 (wt.%), solid phase yields (coke) between 33.40 and 43.37 (wt.%), and gas yields from 31.85 to 34.45 (wt.%). The yield of bio-oil shows a smooth exponential increase with temperature. The acidity of bio-oil varied between 12.3 and 257.6 mgKOH/g, decreasing exponentially with temperature, while that of aqueous phase between 17.9 and 118.9 mgKOH/g, showing and exponential decay behavior with temperature, demonstrating that higher temperatures favor not only the yield of bio-oil but also bio-oils with lower acidity. For the experiments with KOH activation, the GC-MS of bio-oil identified the presence of hydro-carbons (alkanes, alkenes, cycloalkanes, cycloalkenes, and aromatics) and oxygenates (carboxylic acids, phenols, ketones, and esters). The concentration of hydrocarbons varied between 10.19 to 25.71 (area.%), increasing with temperature, while that of oxygenates from 52.69 to 72.15 (area.%), decreasing with temperature. For the experiments with constant temperature, the concentrations of hydrocarbons in bio-oil increase exponentially with molarity, while those of oxygenates de-crease exponentially, showing that higher molarities favor the formation of hydrocarbons in bio-oil. The antioxidant activity of bio-oils decreases with increasing temperature, as the content of phenolic compounds decreases, and decreases with increasing KOH molarity, as higher molarities favors the formation of hydrocarbons. Finally, it can be concluded that chemical activation of Açaí seeds with KOH favors the not only the yield of bio-oil but also the content of hydrocarbons. The study of process variables is of utmost importance in order to clearly assess reaction mechanisms, economic viability and design goals that could be derived from chemically activated biomass pyrolysis processes.


  • Open Access

    Prediction of Leachate Composition by Analysis of the Solubilized Extract of the Organic Fraction of Domestic Solid Waste from the municipality of Belém-PA

    by Diogo Oliveira Pereira, Fernanda Paula da Costa Assunção, Jéssica Cristina Conte Da Silva, Jorge Fernando Hungria Ferreira, Raise Brenda Pinheiro Ferreira, Ádila Lima Lola, Ísis Costa Pereira Do Nascimento, Jean Pinheiro Chaves, Mel Safira Cruz Do Nascimento, Thalia da Silva Gouvêa, et al.

    In this study, the gravimetric characterization and analysis of the solubilized extract of the organic fraction of Urban Household Solid Waste (RSDU) from the municipality of Belém do Pará was carried out in order to obtain the composition of the collected materials and the characteristics of the liquid resulting from the solubilization of these materials . The waste used to carry out this research was collected door-to-door, in which the points and neighborhoods served were determined through the sectorization of these locations and representative statistical sampling. For the sectorization of neighborhoods, family income values were considered as the main parameter. After collecting the solid waste, the material was sent to the facilities of the Federal University of Pará (FUPa), where the waste was classified into paper, cardboard, tetrapak, rigid plastic, soft plastic, metals, glass, organic matter, waste toilets, fabrics and others. The organic fraction of solid waste was separated and sent to the drying, crushing and packaging processes. Subsequently, the solubilized extract of the organic fraction of solid waste was obtained, following the methodology recommended by NBR standard nº 10.006/2004, of the Brazilian Association of Technical Standards and the values obtained were compared with Ordinance GM/MS nº 888/2021 and CONAMA Resolution nº 357/2005, in addition to results obtained by other authors. After carrying out the gravimetric characterization, it was possible to obtain the average proportions of 5.09% paper, 3.20% cardboard, 0.94% tetrapak, 3.58% rigid plastic, 9.97% soft plastic, 2.00% metals, 55.57% organic matter, 1.86% glass, 14.26% sanitary waste, 3.23% fabrics and 3.00% other waste. High values of organic residues were found in the gravimetric composition, which can be explained by the collection method used and the high humidity of the organic solid residues. In the analyzes of the solubilized extract, values of Hp (3.69 to 4.92), Turbidity (791 to 1,733 uT), Apparent Color (8,500 to 12,500 uC), True Color (6,000 to 14,000 uC), Total Dissolved Solids (5,330 to 8,040 mg/L), Total Nitrogen (201.80 to 359.90 mg/L), Ammoniacal Nitrogen (161 to 289 mg/L), Nitrate (10 to 40 mg/L), Total Phosphorus (52.30 to 166.80 mg/L) and Chemical Oxygen Demand (28,701 mg/L to 38,608 mg/L), in addition to other measured parameters, in which such information makes it possible to check the similarities of the waste solubilization conditions to that of leachates from landfills, in addition to not being in compliance with environmental and health legislation, demonstrating risks to the local environment and public health.

  • Open Access

    Effect of Temperature and Molarity on the Bio-Oil Yield and Quality by Pyrolysis of açaí Seeds (Euterpe Oleraceae, Mart.) Activated With KOH

    by Flávio Pinheiro Valois, Gerson Valdez Daniel, Kelly Christina Alves Bezerra, Fernanda Paula da Costa Assunção, Sammy Jonatan Bremer, Lucas Pinto Bernar, Simone Patrícia Aranha Da Paz, Marcelo Costa Santos, Waldeci Paraguassu Feio, Renan Marcelo Pereira Silva, et al.

    This study explores the impact of temperature and molarity in the pyrolysis of Açaí seeds (Euterpe Oleraceae, Mart.) activated with KOH on the yield of bio-oil, hydrocarbon content of bio-oil, and chemical composition of aqueous phase. The experiments were carried out at 350, 400, and 450 °C and 1.0 atmosphere, with 2.0 M KOH, and at 450 °C and 1.0 atmosphere, with 0.5 M, 1.0 M and 2.0 M KOH, in laboratory scale. The composition of bio-oils and aqueous phase determined by GC-MS, while the acid value, a physico-chemical property of fundamental importance in bio-fuels, of bio-oils and aqueous phases by AOCS methods. The solid phase (biochar) characterized by X-ray diffraction (XRD). The diffractograms identified the presence of Kalicinite (KHCO3) in biochar, and those higher temperatures favor the formation peaks of Kalicinite (KHCO3). The pyrolysis of Açaí seeds activated with KOH show bio-oil yields from 3.19 to 6.79 (wt.%), aqueous phase yields between 20.34 and 25.57 (wt.%), solid phase yields (coke) between 33.40 and 43.37 (wt.%), and gas yields from 31.85 to 34.45 (wt.%). The yield of bio-oil shows a smooth exponential increase with temperature. The acidity of bio-oil varied between 12.3 and 257.6 mgKOH/g, decreasing exponentially with temperature, while that of aqueous phase between 17.9 and 118.9 mgKOH/g, showing and exponential decay behavior with temperature, demonstrating that higher temperatures favor not only the yield of bio-oil but also bio-oils with lower acidity. For the experiments with KOH activation, the GC-MS of bio-oil identified the presence of hydrocarbons (alkanes, alkenes, cycloalkanes, cycloalkenes, and aromatics) and oxygenates (carboxylic acids, phenols, ketones, and esters). The concentration of hydrocarbons varied between 10.19 to 25.71 (area.%), increasing with temperature, while that of oxygenates from 52.69 to 72.15 (area.%), decreasing with temperature. For the experiments with constant temperature, the concentrations of hydrocarbons in bio-oil increase exponentially with molarity, while those of oxygenates decrease exponentially, showing that higher molarities favor the formation of hydrocarbons in bio-oil. Finally, it can be concluded that chemical activation of Açaí seeds with KOH favors the not only the yield of bio-oil but also the content of hydrocarbons. The study of process variables is of utmost importance in order to clearly assess reaction mechanisms, economic viability and design goals that could be derived from chemically activated biomass pyrolysis processes.


  • Open Access

    Improving the Bio-Oil Quality of Residual Biomass Pyrolysis by Chemical Activation: Effect of Alkalis and Acid Pre-Treatment

    by Gérson Daniel Valdez, Flávio Pinheiro Valois, Sammy Jonatan Bremer, Kelly Christina Alves Bezerra, Lauro Henrique Hamoy Guerreiro, Marcelo Costa Santos, Lucas Pinto Bernar, Waldeci Paraguassu Feio, Luiz Gabriel Santos Moreira, Neyson Martins Mendonça, et al.

    In this study, we investigated the acid (HCl) and alkali (KOH) chemical activation of açaí seeds (Euterpe Oleraceae, Mart.) pre-treatment before pyrolysis at temperatures of 350–450 °C in order to assess how reactions proceed when affected by temperature. Chemical composition of bio-oil and aqueous phase were determined by GC-MS and FT-IR. The bio-char is characterized by XRD. For the activation with KOH, the XRD analysis identified the presence of Kalicinite (KHCO3), the dominant crystalline phase in bio-char, while an amorphous phase was identified in bio-chars for the activation with HCl. The experiments have shown that bio-oil yield increases with temperature for the KOH activated biomass and decreases for the acid activated one. The KOH bio-oil is primarily composed of alcohols and ketones, showing the lowest acid values when compared with the HCl one, which is composed mainly of carboxylic acids and phenols. An increase in alcohol content and a decrease in ketones in the KOH bio-oil with temperature suggests conversion reactions between these two functions. For HCl bio-oil, carboxylic acid concentration increases with temperature while phenols decrease. For production of hydrocarbons, KOH activated biomass pyrolysis is better than acid-activated one, since no hydrocarbons were produced for HCl bio-oil.