Influence of Blade Number on the Performance and Pressure Pulsations in a Pump Used as a Turbine
- 20 November 2012
- journal article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 134 (12) , 124503
Abstract
The rotor-stator interaction of a rotating impeller and a stationary volute could cause strong pressure pulsations and generate flow induced noise and vibration in a pump used as a turbine (PAT). Blade number is one of the main geometric parameters of the impeller. In this paper, a numerical investigation of the PAT’s unsteady pressure field with different blade numbers was performed. The accuracy of global performance prediction by computational fluid dynamics (CFD) was first verified through comparison between numerical and experimental results. Unsteady pressure fields of the PAT with different blade numbers were simulated, and the pulsations were extracted at various locations covering the PAT’s three main hydraulic parts. A detailed analysis of the unsteady pressure field distributions within the PAT’s control volume and comparison of unsteady pressure difference caused by the increase of blade number were performed. The transient flow results provided the unsteady pressure distribution within PAT and showed that increasing the blade number could effectively reduce the amplitude of pressure pulsations. Finally, unsteady pressure field tests were performed and some unsteady results obtained by unsteady field analysis were validated.Keywords
This publication has 13 references indexed in Scilit:
- Theoretical, numerical and experimental prediction of pump as turbine performanceRenewable Energy, 2012
- Effects of Blade Wrap Angle Influencing a Pump as TurbineJournal of Fluids Engineering, 2012
- Numerical modelling and flow analysis of a centrifugal pump running as a turbine: Unsteady flow structures and its effects on the global performanceInternational Journal for Numerical Methods in Fluids, 2011
- An optimization routine on a prediction and selection model for the turbine operation of centrifugal pumpsExperimental Thermal and Fluid Science, 2010
- Efficiency Improvement of Centrifugal Reverse PumpsJournal of Fluids Engineering, 2009
- Thirty years of numerical flow simulation in hydraulic turbomachinesActa Mechanica, 2008
- Theoretical, numerical and experimental investigation of centrifugal pumps in reverse operationExperimental Thermal and Fluid Science, 2008
- Numerical Study of Unsteady Flow in a Centrifugal PumpJournal of Turbomachinery, 2005
- The Unsteady Pressure Field in a High Specific Speed Centrifugal Pump Impeller—Part II: Transient Hysteresis in the CharacteristicJournal of Fluids Engineering, 1999
- The Unsteady Pressure Field in a High Specific Speed Centrifugal Pump Impeller—Part I: Influence of the VoluteJournal of Fluids Engineering, 1999