A Comparative Analysis of Measured and Calculated Compressive Stresses of Magnetorheological Fluids under Unidirectional Compression and Constant Area
Open Access
Abstract
Unidirectional compressive properties of magnetorheological (MR) fluids have been investigated under slow compression and constant area with different magnetic fields and different initial gap distances. Experimental tests of unidirectional compression were firstly carried out by using a commercial plate–plate rheometer. The theoretical model based on the continuous squeeze flow theory was developed to calculate the compressive stress. The comparisons between the measured and calculated compressive stresses of MR fluids were made. It showed that the compression resistance of the MR fluid in the magnetic field was much higher than that predicted by the theory. With the increasing magnetic flux density, the deviation between measured and calculated curves accelerated. Characteristics of the compressive stress variation with the reduction in gap distance have been analyzed. The structure strengthening effect induced by the chain structure aggregation in squeeze mode has been used to explain this deviation.Keywords
Funding Information
- National Natural Science Foundation of China (51205367)
- Science Technology Project of Zhejiang Province (2014C31090,LGG22E050014)
This publication has 26 references indexed in Scilit:
- The Mechanical Property of Magnetorheological Fluid Under Compression, Elongation, and ShearingJournal of Intelligent Material Systems and Structures, 2011
- Structure factor of electrorheological fluids in compressive flowSmart Materials and Structures, 2010
- The performance of magnetorheological fluid in squeeze modeSmart Materials and Structures, 2007
- Compressions of electrorheological fluids under different initial gap distancesPhysical Review E, 2003
- A critical study of the Bingham model in squeeze-flow modeMaterials & Design (1980-2015), 2001
- Super-strong magnetorheological fluidsJournal of Physics: Condensed Matter, 2001
- Viscoelastic Properties of Magneto- and Electro-Rheological FluidsJournal of Intelligent Material Systems and Structures, 1994
- Electrorheological fluids applied to an automotive engine mountJournal of Non-Newtonian Fluid Mechanics, 1993
- A numerical simulation of a plastic fluid in a parallel-plate plastometerJournal of Non-Newtonian Fluid Mechanics, 1984
- Use of the parallel-plate plastometer for the characterisation of viscous fluids with a yield stressJournal of Non-Newtonian Fluid Mechanics, 1981