Evaluation of bond strength between zirconia milled ceramic material and veneered dental porcelain
Open Access
- 28 April 2024
- journal article
- research article
- Published by Wiley in European Journal of Oral Sciences
- Vol. 132 (3) , e12989
Abstract
This study aimed at examining the bond strength between zirconia and ceramic veneer, following the ISO 9693 guidelines. A total of fifty specimens of zirconia/ceramic‐veneer system were produced using two commercial zirconias (VITA YZ‐HTWhite and Zolid HT+ White, referred to as Group A and Group B, respectively) and a ceramic‐veneering material (Zirkonia 750). The microstructure (via x‐ray diffraction analysis, XRD and Secondary Electron mode, SEM) and the mechanical properties (via 3‐point bending tests) of the two groups were assessed. Then, experiments were conducted according to the ISO 9693 and conventional protocols applied for producing zirconia/ceramic‐veneer restorations. Bond strength values, measured by 3‐point bending tests, were 34.42 ± 7.60 MPa for Group A and 31.92 ± 6.95 MPa for Group B. SEM observations of the cohesively fractured surfaces (on the porcelain side) and the examination for normality using the Shapiro–Wilk test suggested the use of Weibull statistical analysis. Median strength (σ50%) for Group A and Group B was 34.76 and 32.22 MPa, while the characteristic strength (σ63.2%) was 35.78 and 33.14 MPa, respectively. The Weibull modulus disparity between groups (12.69 and 13.07) was not significant. Bond strength exceeded the ISO 9693 minimum of 20 MPa, suggesting satisfactory strength for clinical use.Keywords
This publication has 27 references indexed in Scilit:
- Bond strength of heat-pressed veneer ceramics to zirconia with various blasting conditionsJournal of Dental Sciences, 2018
- Bioactive and inert dental glass‐ceramicsJournal of Biomedical Materials Research Part A, 2016
- Characterization of three commercial Y-TZP ceramics produced for their High-Translucency, High-Strength and High-Surface AreaCeramics International, 2016
- Phase transformation and subsurface damage in 3Y-TZP after sandblastingDental Materials, 2013
- The future of dental devices is digitalDental Materials, 2012
- A practical and systematic review of Weibull statistics for reporting strengths of dental materialsDental Materials, 2010
- Tensile bond strength between tooth-colored porcelain and sandblasted zirconia frameworkJournal of Prosthodontic Research, 2009
- State of the art of zirconia for dental applicationsDental Materials, 2008
- Fracture statistics of ceramics – Weibull statistics and deviations from Weibull statisticsEngineering Fracture Mechanics, 2007
- Moduli of rupture of layered dental ceramicsDental Materials, 1994