Static Characteristics of Journal Bearings With Square Dimples
- 19 May 2017
- journal article
- Published by ASME International in Journal of Tribology
- Vol. 139 (5) , 051703
Abstract
Surface texturing is a technique for improving frictional and hydrodynamic performances of journal bearings because microtextures can serve as reservoirs for oil or traps for debris and may also generate hydrodynamic pressure. Over the past two decades, many researchers have experimentally demonstrated that texturing of various tribological elements can reduce friction force and wear, contributing to improvement of lubrication performance. Some numerical studies have examined the hydrodynamic lubrication conditions and reported that surface texturing affects the static characteristics of journal bearings, such as their load carrying capacity and friction torque. However, the validity of these numerical models has not been confirmed because of a lack of experimental studies. This study proposes a numerical model that includes both inertial effects and energy loss at the edges of dimples on the surface of a journal bearing in order to investigate the bearing's static characteristics. Experimental verification of journal bearings is also conducted with a uniform square-dimple pattern on their full-bearing surface. The results obtained by the model agree well with those of experiment, confirming the model's validity. These results show that under the same operating conditions, textured bearings yield a higher eccentricity ratio and lower attitude angle than the conventional ones with a smooth surface. This tendency becomes more marked for high Reynolds number operating conditions and for textured bearings with a large number of dimples.Keywords
This publication has 19 references indexed in Scilit:
- Performance, Characterization and Design of Textured SurfacesJournal of Tribology, 2012
- A Laser Surface Textured Journal BearingJournal of Tribology, 2012
- Effect of textured area on the performances of a hydrodynamic journal bearingTribology International, 2011
- Static Characteristics of Liquid Annular Seals with Square-Hole PatternTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 2008
- The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contactTribology International, 2005
- Optimal Clearance Configuration of Fluid-Film Journal Bearings for Stability ImprovementJournal of Tribology, 2004
- A Laser Surface Textured Hydrostatic Mechanical SealTribology Transactions, 2002
- Experimental Investigation of Laser Surface Texturing for Reciprocating Automotive ComponentsTribology Transactions, 2002
- Analysis of the Hydrodynamic Effects in a Surface Textured Circumferential Gas SealTribology Transactions, 2001
- Pressure Drop Due to Inertia Forces in Step BearingsJournal of Lubrication Technology, 1976