Confirmation of performance and reliability of direct lubricated tilting two pads bearing
Authors:
- 9 April 2015
- journal article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 229 (8) , 1011-1021
Abstract
Direct lubricated tilting two pads bearing with 890 mm diameter for large steam turbine was developed. Its performance, both static and dynamic characteristics, and reliability were tested with full scale test, after confirmation by thermo-hydrodynamic calculation coupled with finite element method deformation analysis, to evaluate deformations of the bearing pads. As a result of full scale test, it was confirmed that all of the target values were satisfied. In the same manner, robustness tests, changing the tilt angle of the shaft and supply oil condition were also conducted, and sufficient safety operations of the test bearing were also confirmed. Compared to the conventional bearings, the friction loss of the developed bearing was less than half of other types, such as flooded type, or direct lubricated four pads bearing.Keywords
This publication has 11 references indexed in Scilit:
- Investigation of Flow and Mixing Phenomena in an Oil Supply Pocket of a Heavy Duty Gas Turbine Journal Bearing2013
- Study of the Influence of Heat Convection Coefficient on Predicted Performance of a Large Tilting-Pad Thrust BearingJournal of Tribology, 2012
- Transient thermoelastohydrodynamic analysis for safe operating conditions of a tilting-pad journal bearing during start-upTribology International, 2000
- A Thermohydrodynamic Lubrication Analysis to Design Large Two-Pad Journal Bearing With Cooling DitchesJournal of Tribology, 1998
- The Effects of Three-Dimensional Pad Deformations on Tilting-Pad Journal Bearings Under Dynamic LoadingJournal of Tribology, 1995
- Experimental Study of Tilting-Pad Journal Bearings—Comparison With Theoretical Thermoelastohydrodynamic ResultsJournal of Tribology, 1992
- A Thermohydrodynamic Analysis of Large Tilting-Pad Journal Bearing in Laminar and Turbulent Flow Regimes With MixingJournal of Tribology, 1990
- Mixing Inlet Temperatures in Hydrodynamic BearingsJournal of Tribology, 1986
- A Comparison of Tilting Pad Thrust Bearing Lubricant Supply MethodsJournal of Lubrication Technology, 1983
- Experimental Comparison of Flooded, Directed, and Inlet Orifice Type of Lubrication for a Tilting Pad Thrust BearingJournal of Lubrication Technology, 1974