Effective Electrical Conductivity Performance of a 25% Antimo-Nial Lead Alloy-Air Battery Cell Made With Esr Open Cell Foams As Electrode
Authors:
- Amel Hind Hassein-BeyAHAmel Hind Hassein-Bey
- Abd-Elmouneïm BelhadjABAbd-Elmouneïm Belhadj
- Selma ToumiSTSelma Toumi
- Hichem TahraouiHTHichem Tahraoui
- Mohammed KebirMKMohammed Kebir
- Abdeltif AmraneAbdeltif Amrane
- Chebli DerradjiCDChebli Derradji
- Abdallah BouguettouchaABAbdallah Bouguettoucha
- Jie ZhangJie Zhang
- Lotfi MouniLMLotfi Mouni
Preprint
- 5 May 2023
- preprint
- Published by MDPI AG in Preprints.org
Abstract
The global context of research for new sustainable energy storage technologies makes it a very active sector with significant scientific and economic challenges. Indeed, due to the irregular development of renewable energies and the shutdown of traditional power facilities, it is difficult to maintain a stable balance in terms of supply and demand: energy storage can help in particular for substantial changes in the latter. Metal air batteries have a higher energy density and are safer than other available energy storage devices. Based on the existing and proven lead-acid battery technology, this paper proposed an open cell foam manufactured by the Excess Salt Replication process for use as an anode for lead-air battery cellsies with sulphuric acid as the electrolyte. This will save lead and reduce the battery weight. A 25% antimonial lead alloy was used to produce open cell foams with a cell diameter between 2 mm and 5 mm for the antimonial lead-air battery. Preliminary results of the effective electrical conductivity of self-discharged primary battery cells, measured experimentally, showed that all antimonial lead foam-air battery cellsies performed better than that made from the same dense non porous antimonial lead alloy. This is generally due to their important specific surface area where oxidation-reduction reactions took place. A correlation between the effective electrical conductivity and the cell diameter has been established and the highest conductivity was obtained with a cell diameter of 5mm. The feasibility of such an electrical system has been demonstrated.Keywords
All Related Versions
This publication has 35 references indexed in Scilit:
- Nanotubes make battery lighter and saferCarbon, 2020
- Applications of carbon in lead-acid batteries: a reviewJournal of Solid State Electrochemistry, 2019
- Metal–Air Batteries: From Static to Flow SystemAdvanced Energy Materials, 2018
- Influence of some nanostructured materials additives on the performance of lead acid battery negative electrodesElectrochimica Acta, 2014
- Technologies for extending zinc–air battery’s cyclelife: A reviewApplied Energy, 2014
- A low-cost lead-acid battery with high specific-energyJournal of Chemical Sciences, 2006
- Lead/acid batteriesJournal of Power Sources, 1994
- Structure of PbSb2O6 and its relationship to the crystal chemistry of PbO2 in antimonial lead-acid batteriesJournal of Solid State Chemistry, 1987
- Electrical conductivity of acidic sulfate solutionMetallurgical Transactions B, 1987
- Porous‐electrode theory with battery applicationsAIChE Journal, 1975