Derradji Chebli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Derradji Chebli has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Abdeltif Amrane
Universiti Kuala Lumpur, Malaysian Institute of Marine Engineering Technology (UniKL MIMET), Dataran Industri Teknologi Kejuruteraan Marin Bandar Teknologi Maritim Jalan Pantai Remis, Universiti Kuala Lumpur
14 shared publications - Abdallah Bouguettoucha
Laboratoire de Génie de l’Environnement et des Procédés Pharmaceutiques (LGEPP), Département de Génie des Procédés, Faculté de Technologie, Université Ferhat Abbas, Sétif, Algeria
13 shared publications - Hichem Tahraoui
Ecole Nationale Supérieure de Chimie de Rennes, University of Rennes, CNRS, ISCR—UMR6226
8 shared publications - Jie Zhang
Nanyang Technological University, Singapore
8 shared publications - Mohammed Kebir
Research Unit on Analysis and Technological Development in Environment (URADTE-CRAPC), BP 384, Bou-Ismail 42000, Algeria
7 shared publications - Abd-Elmouneïm Belhadj
Laboratory of Biomaterials and Transport Phenomena, University of Medea, Medea 26000, Algeria
5 shared publications
Latest Publications
- 13 July 2025
- Published by Springer Nature in Journal of the Iranian Chemical Society
- Vol. 22 (7) , 1521-1533
Performance of Iron (III) in two different approaches through heterogeneous photo-Fenton-like degradation of Congo red
- 13 July 2025
- Published by Springer Nature in Journal of the Iranian Chemical Society
- Vol. 22 (7) , 1521-1533
Performance of Iron (III) in two different approaches through heterogeneous photo-Fenton-like degradation of Congo red
- Open Access
Green Innovation: Multifunctional Zinc Oxide Nanoparticles Synthesized Using Quercus robur for Photocatalytic Performance, Environmental, and Antimicrobial Applications
This study investigates the green synthesis of zinc oxide nanoparticles (ZnO NPs) using leaf extract as a natural reducing agent, evaluating their antimicrobial and photocatalytic properties. The nanoparticles were annealed at 320 °C and 500 °C, and the effects of leaf extract concentration and annealing temperature on their structural, morphological, and electronic properties were systematically explored. X-ray diffraction (XRD) analysis confirmed the hexagonal wurtzite structure of ZnO, with crystallite size and defect density being influenced by the concentration of the extract. Scanning electron microscopy (SEM) revealed the formation of smaller, spherical particles, with increased aggregation observed at higher extract concentrations. Fourier-transform infrared spectroscopy (FTIR) identified key functional groups, such as hydroxyl groups, C–O bonds, and metal–oxygen vibrations. UV–Vis spectroscopy showed a reduction in band gap energy and an increase in Urbach energy as the extract concentration and annealing temperature were increased. The antimicrobial activity of the ZnO NPs was evaluated against Gram-positive and Gram-negative bacteria as well as Candida albicans, demonstrating significant antibacterial efficacy. Photocatalytic degradation studies of methylene blue dye revealed a superior efficiency of up to 74% for the annealed samples, particularly at 500 °C. This research highlights the potential of green-synthesized ZnO NPs for a wide range of applications, including antimicrobial agents, water purification, and environmental catalysis. It contributes to the advancement of sustainable nanotechnology, offering promising solutions for both technological and ecological challenges.
Open AccessGreen Innovation: Multifunctional Zinc Oxide Nanoparticles Synthesized Using Quercus robur for Photocatalytic Performance, Environmental, and Antimicrobial Applications
This study investigates the green synthesis of zinc oxide nanoparticles (ZnO NPs) using leaf extract as a natural reducing agent, evaluating their antimicrobial and photocatalytic properties. The nanoparticles were annealed at 320 °C and 500 °C, and the effects of leaf extract concentration and annealing temperature on their structural, morphological, and electronic properties were systematically explored. X-ray diffraction (XRD) analysis confirmed the hexagonal wurtzite structure of ZnO, with crystallite size and defect density being influenced by the concentration of the extract. Scanning electron microscopy (SEM) revealed the formation of smaller, spherical particles, with increased aggregation observed at higher extract concentrations. Fourier-transform infrared spectroscopy (FTIR) identified key functional groups, such as hydroxyl groups, C–O bonds, and metal–oxygen vibrations. UV–Vis spectroscopy showed a reduction in band gap energy and an increase in Urbach energy as the extract concentration and annealing temperature were increased. The antimicrobial activity of the ZnO NPs was evaluated against Gram-positive and Gram-negative bacteria as well as Candida albicans, demonstrating significant antibacterial efficacy. Photocatalytic degradation studies of methylene blue dye revealed a superior efficiency of up to 74% for the annealed samples, particularly at 500 °C. This research highlights the potential of green-synthesized ZnO NPs for a wide range of applications, including antimicrobial agents, water purification, and environmental catalysis. It contributes to the advancement of sustainable nanotechnology, offering promising solutions for both technological and ecological challenges.
- Open Access
- 11 November 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (22) , 10365
Effect of Washing Temperature on Adsorption of Cationic Dyes by Raw Lignocellulosic Biomass
This study evaluated the potential of using raw Maclura pomifera and wild carob for the treatment of methylene blue (MB) and crystal violet (CV) as part of the search for new, abundant, and cost-effective natural materials applicable for wastewater treatment. Additionally, it explored the impact of washing water temperature on the adsorption performance of these raw organic materials. The physicochemical properties of the materials were characterized using BET, SEM/EDS, and FTIR analyses. The effects of various experimental parameters were investigated through batch adsorption experiments. The results demonstrated that the influence of washing water temperature was material-dependent. For Maclura pomifera, the maximum adsorption capacity of methylene blue and crystal violet decreased from 134.4 and 136.6 mg g−1 for MPC to 67.1 and 90.5 mg g−1 for MPH. In contrast, the adsorption capacities of wild carob biosorbents remained consistent, with the maximum amounts adsorbed for methylene blue and crystal violet by CC, CW, and CH being close, around 78.8 and 98.9 mg g−1, respectively, indicating a minimal effect of washing temperature on this material. The adsorption of both dyes onto the adsorbents was positively affected by increasing the pH, contact time, and initial dye concentration and was negatively affected by increasing adsorbent dose or ionic strength. Adsorption isotherms and kinetics were modeled using various mathematical approaches. The kinetic data were accurately described by a pseudo-second-order model, with a significant contribution from intraparticle diffusion. The Sips and Redlich–Peterson models provided the best fit for the adsorption isotherms of both dyes on the biosorbents. These findings confirm that the selected biomaterials are excellent adsorbents for the removal of cationic dyes.
- 11 November 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (22) , 10365
Open AccessEffect of Washing Temperature on Adsorption of Cationic Dyes by Raw Lignocellulosic Biomass
This study evaluated the potential of using raw Maclura pomifera and wild carob for the treatment of methylene blue (MB) and crystal violet (CV) as part of the search for new, abundant, and cost-effective natural materials applicable for wastewater treatment. Additionally, it explored the impact of washing water temperature on the adsorption performance of these raw organic materials. The physicochemical properties of the materials were characterized using BET, SEM/EDS, and FTIR analyses. The effects of various experimental parameters were investigated through batch adsorption experiments. The results demonstrated that the influence of washing water temperature was material-dependent. For Maclura pomifera, the maximum adsorption capacity of methylene blue and crystal violet decreased from 134.4 and 136.6 mg g−1 for MPC to 67.1 and 90.5 mg g−1 for MPH. In contrast, the adsorption capacities of wild carob biosorbents remained consistent, with the maximum amounts adsorbed for methylene blue and crystal violet by CC, CW, and CH being close, around 78.8 and 98.9 mg g−1, respectively, indicating a minimal effect of washing temperature on this material. The adsorption of both dyes onto the adsorbents was positively affected by increasing the pH, contact time, and initial dye concentration and was negatively affected by increasing adsorbent dose or ionic strength. Adsorption isotherms and kinetics were modeled using various mathematical approaches. The kinetic data were accurately described by a pseudo-second-order model, with a significant contribution from intraparticle diffusion. The Sips and Redlich–Peterson models provided the best fit for the adsorption isotherms of both dyes on the biosorbents. These findings confirm that the selected biomaterials are excellent adsorbents for the removal of cationic dyes.
- Open Access
Optimising Lead–Air Battery Performance through Innovative Open-Cell Foam Anodes
In the dynamic realm of sustainable energy storage technologies, the global research landscape presents myriad scientific and economic challenges. The erratic growth of renewable energies alongside the phasing out of conventional power plants poses a significant hurdle in maintaining a stable balance between energy supply and demand. Consequently, energy storage solutions play a pivotal role in mitigating substantial fluctuations in demand. Metal–air batteries, distinguished by their superior energy density and enhanced safety profile compared to other storage devices, emerge as promising solutions. Leveraging the well-established lead–acid battery technology, this study introduces a novel approach utilising open-cell foam manufactured through the Excess Salt Replication process as an anode for lead–air battery cells. This innovation not only conserves lead but also reduces battery weight. By employing a 25% antimonial lead alloy, open-cell foams with diameters ranging from 2 mm to 5 mm were fabricated for the antimonial lead–air battery. Preliminary findings suggest that the effective electrical conductivity of primary battery cells, measured experimentally, surpasses that of cells composed of the same dense, non-porous antimonial lead alloy. This improvement is primarily attributed to their extensive specific surface area, facilitating oxidation–reduction reactions. A correlation between effective electrical conductivity and cell diameter is established, indicating optimal conductivity achieved with a 5 mm cell diameter. These results underscore the feasibility of implementing such an electrical system.
Open AccessOptimising Lead–Air Battery Performance through Innovative Open-Cell Foam Anodes
In the dynamic realm of sustainable energy storage technologies, the global research landscape presents myriad scientific and economic challenges. The erratic growth of renewable energies alongside the phasing out of conventional power plants poses a significant hurdle in maintaining a stable balance between energy supply and demand. Consequently, energy storage solutions play a pivotal role in mitigating substantial fluctuations in demand. Metal–air batteries, distinguished by their superior energy density and enhanced safety profile compared to other storage devices, emerge as promising solutions. Leveraging the well-established lead–acid battery technology, this study introduces a novel approach utilising open-cell foam manufactured through the Excess Salt Replication process as an anode for lead–air battery cells. This innovation not only conserves lead but also reduces battery weight. By employing a 25% antimonial lead alloy, open-cell foams with diameters ranging from 2 mm to 5 mm were fabricated for the antimonial lead–air battery. Preliminary findings suggest that the effective electrical conductivity of primary battery cells, measured experimentally, surpasses that of cells composed of the same dense, non-porous antimonial lead alloy. This improvement is primarily attributed to their extensive specific surface area, facilitating oxidation–reduction reactions. A correlation between effective electrical conductivity and cell diameter is established, indicating optimal conductivity achieved with a 5 mm cell diameter. These results underscore the feasibility of implementing such an electrical system.
- Open Access
The Enhanced Adsorption Capacity of Ziziphus jujuba Stones Modified with Ortho-Phosphoric Acid for Organic Dye Removal: A Gaussian Process Regression Approach
Here, the chemical modification of Ziziphus jujuba stones (ZJS) treated with ortho-phosphoric acid (ZJS-H3PO4) is investigated to enhance its adsorption properties for organic dyes. The physicochemical properties of ZJS-H3PO4 reveal increased porosity (87.29%), slightly higher bulk density (0.034 g mL−1), and enhanced acidity (31.42 m eq g g−1) compared to untreated ZJS. XRF analysis confirms the successful incorporation of orthophosphoric acid during treatment due to a significant increase in phosphorus content. The maximum adsorption capacity of methylene blue on ZJS-H3PO4 is found to be 179.83 mg g−1, demonstrating its efficacy as a potential adsorbent for organic dyes. These findings suggest that modifying ZJS with orthophosphoric acid could be a promising strategy to enhance its adsorption performance in various environmental applications. Furthermore, Gaussian process regression (GPR) is employed to model MB adsorption by ZJS-H3PO4. Optimization of the GPR model involves evaluating different kernel functions and meticulously adjusting parameters to maximize its ability to capture complex relationships in the data. The obtained GPR model demonstrates remarkable performance with high correlation coefficients (R) and low root mean square errors (RMSEs) across all study phases. Model validation is performed through residual analysis, confirming its effectiveness and accuracy in predicting MB adsorption. Finally, a user-friendly interface is developed to facilitate the usage of the GPR model in future applications, representing a significant advancement in environmental process modeling and ecosystem management.
Open AccessThe Enhanced Adsorption Capacity of Ziziphus jujuba Stones Modified with Ortho-Phosphoric Acid for Organic Dye Removal: A Gaussian Process Regression Approach
Here, the chemical modification of Ziziphus jujuba stones (ZJS) treated with ortho-phosphoric acid (ZJS-H3PO4) is investigated to enhance its adsorption properties for organic dyes. The physicochemical properties of ZJS-H3PO4 reveal increased porosity (87.29%), slightly higher bulk density (0.034 g mL−1), and enhanced acidity (31.42 m eq g g−1) compared to untreated ZJS. XRF analysis confirms the successful incorporation of orthophosphoric acid during treatment due to a significant increase in phosphorus content. The maximum adsorption capacity of methylene blue on ZJS-H3PO4 is found to be 179.83 mg g−1, demonstrating its efficacy as a potential adsorbent for organic dyes. These findings suggest that modifying ZJS with orthophosphoric acid could be a promising strategy to enhance its adsorption performance in various environmental applications. Furthermore, Gaussian process regression (GPR) is employed to model MB adsorption by ZJS-H3PO4. Optimization of the GPR model involves evaluating different kernel functions and meticulously adjusting parameters to maximize its ability to capture complex relationships in the data. The obtained GPR model demonstrates remarkable performance with high correlation coefficients (R) and low root mean square errors (RMSEs) across all study phases. Model validation is performed through residual analysis, confirming its effectiveness and accuracy in predicting MB adsorption. Finally, a user-friendly interface is developed to facilitate the usage of the GPR model in future applications, representing a significant advancement in environmental process modeling and ecosystem management.
- Top Cited PapersOpen Access
Evaluating the Effectiveness of Coagulation–Flocculation Treatment Using Aluminum Sulfate on a Polluted Surface Water Source: A Year-Long Study
Safeguarding drinking water is a major public health and environmental concern because it is essential to human life but may contain pollutants that can cause illness or harm the environment. Therefore, continuous research is necessary to improve water treatment methods and guarantee its quality. As part of this study, the effectiveness of coagulation–flocculation treatment using aluminum sulfate (Al2(SO4)3) was evaluated on a very polluted site. Samplings were taken almost every day for a month from the polluted site, and the samples were characterized by several physicochemical properties, such as hydrogen potential (pH), electrical conductivity, turbidity, organic matter, ammonium (NH+4), phosphate (PO43−), nitrate (NO3−), nitrite (NO2−), calcium (Ca2+), magnesium (Mg2+), total hardness (TH), chloride (Cl−), bicarbonate (HCO3−), sulfate (SO42−), iron (Fe3+), manganese (Mn2+), aluminum (Al3+), potassium (K+), sodium (Na+), complete alkalimetric titration (TAC), and dry residue (DR). Then, these samples were treated with Al2(SO4)3 using the jar test method, which is a common method to determine the optimal amount of coagulant to add to the water based on its physicochemical characteristics. A mathematical model had been previously created using the support vector machine method to predict the dose of coagulant according to the parameters of temperature, pH, TAC, conductivity, and turbidity. This Al2(SO4)3 treatment step was repeated at the end of each month for a year, and a second characterization of the physicochemical parameters was carried out in order to compare them with those of the raw water. The results showed a very effective elimination of the various pollutions, with a very high rate, thus demonstrating the effectiveness of the Al2(SO4)3. The physicochemical parameters measured after the treatment showed a significant reduction in the majority of the physicochemical parameters. These results demonstrated that the coagulation–flocculation treatment with Al2(SO4)3 was very effective in eliminating the various pollutions present in the raw water. They also stress the importance of continued research in the field of water treatment to improve the quality of drinking water and protect public health and the environment.
Top Cited PapersOpen AccessEvaluating the Effectiveness of Coagulation–Flocculation Treatment Using Aluminum Sulfate on a Polluted Surface Water Source: A Year-Long Study
Safeguarding drinking water is a major public health and environmental concern because it is essential to human life but may contain pollutants that can cause illness or harm the environment. Therefore, continuous research is necessary to improve water treatment methods and guarantee its quality. As part of this study, the effectiveness of coagulation–flocculation treatment using aluminum sulfate (Al2(SO4)3) was evaluated on a very polluted site. Samplings were taken almost every day for a month from the polluted site, and the samples were characterized by several physicochemical properties, such as hydrogen potential (pH), electrical conductivity, turbidity, organic matter, ammonium (NH+4), phosphate (PO43−), nitrate (NO3−), nitrite (NO2−), calcium (Ca2+), magnesium (Mg2+), total hardness (TH), chloride (Cl−), bicarbonate (HCO3−), sulfate (SO42−), iron (Fe3+), manganese (Mn2+), aluminum (Al3+), potassium (K+), sodium (Na+), complete alkalimetric titration (TAC), and dry residue (DR). Then, these samples were treated with Al2(SO4)3 using the jar test method, which is a common method to determine the optimal amount of coagulant to add to the water based on its physicochemical characteristics. A mathematical model had been previously created using the support vector machine method to predict the dose of coagulant according to the parameters of temperature, pH, TAC, conductivity, and turbidity. This Al2(SO4)3 treatment step was repeated at the end of each month for a year, and a second characterization of the physicochemical parameters was carried out in order to compare them with those of the raw water. The results showed a very effective elimination of the various pollutions, with a very high rate, thus demonstrating the effectiveness of the Al2(SO4)3. The physicochemical parameters measured after the treatment showed a significant reduction in the majority of the physicochemical parameters. These results demonstrated that the coagulation–flocculation treatment with Al2(SO4)3 was very effective in eliminating the various pollutions present in the raw water. They also stress the importance of continued research in the field of water treatment to improve the quality of drinking water and protect public health and the environment.
- Open Access
Green Fabrication of ZnO Nanoparticles and ZnO/rGO Nanocomposites from Algerian Date Syrup Extract: Synthesis, Characterization, and Augmented Photocatalytic Efficiency in Methylene Blue Degradation
This innovative article provides a detailed description of the successful biosynthesis of zinc nanoparticles (ZnO-NPs) using an aqueous extract of Algerian Date Syrup, also known as molasses. A meticulous process was carried out to determine the optimal calcination temperature for ZnO-NPs, a crucial step in the preparation of these nanoparticles. The study was further extended by creating ZnO/rGOx nanocomposites through a hydrothermal method, varying the concentrations of reduced graphene oxide (rGO) at 5%, 10%, and 15%. The characteristics of the nanocomposites were thoroughly explored, encompassing chemical, optical, and morphological aspects, using sophisticated analysis techniques such as scanning electron microscopy (SEM), UV-visible diffuse reflectance spectroscopy (UV DRS), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). These analyses provided an in-depth understanding of the structure and properties of the nanocomposites. The centerpiece of this study is the evaluation of the photocatalytic degradation capacity of ZnO-NPs and ZnO/rGOx nanocomposites. These materials have demonstrated their ability to act as cost-effective and environmentally friendly photocatalysts for wastewater treatment. Experiments on methylene blue degradation under UV irradiation were conducted, yielding impressive results: a degradation efficiency of 86.6% was achieved in 140 min using 1 g/L of ZnO-NPs, and this rate reached 100% with the ZnO/rGO catalyst in the same time frame, highlighting its superiority as a photocatalyst. Furthermore, this study examined the variables affecting the photocatalysis experiment, including the solution’s pH and the amount of catalyst. The results revealed that the ZnO/rGO photocatalyst reached its optimal efficiency under neutral pH conditions and at a concentration of 1 g/L, providing crucial information for practical use of these materials. This enriched article highlights the promising potential of ZnO-NPs and ZnO/rGOx nanocomposites as efficient photocatalysts for methylene blue degradation, paving the way for significant environmental applications in wastewater treatment.
Open AccessGreen Fabrication of ZnO Nanoparticles and ZnO/rGO Nanocomposites from Algerian Date Syrup Extract: Synthesis, Characterization, and Augmented Photocatalytic Efficiency in Methylene Blue Degradation
This innovative article provides a detailed description of the successful biosynthesis of zinc nanoparticles (ZnO-NPs) using an aqueous extract of Algerian Date Syrup, also known as molasses. A meticulous process was carried out to determine the optimal calcination temperature for ZnO-NPs, a crucial step in the preparation of these nanoparticles. The study was further extended by creating ZnO/rGOx nanocomposites through a hydrothermal method, varying the concentrations of reduced graphene oxide (rGO) at 5%, 10%, and 15%. The characteristics of the nanocomposites were thoroughly explored, encompassing chemical, optical, and morphological aspects, using sophisticated analysis techniques such as scanning electron microscopy (SEM), UV-visible diffuse reflectance spectroscopy (UV DRS), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). These analyses provided an in-depth understanding of the structure and properties of the nanocomposites. The centerpiece of this study is the evaluation of the photocatalytic degradation capacity of ZnO-NPs and ZnO/rGOx nanocomposites. These materials have demonstrated their ability to act as cost-effective and environmentally friendly photocatalysts for wastewater treatment. Experiments on methylene blue degradation under UV irradiation were conducted, yielding impressive results: a degradation efficiency of 86.6% was achieved in 140 min using 1 g/L of ZnO-NPs, and this rate reached 100% with the ZnO/rGO catalyst in the same time frame, highlighting its superiority as a photocatalyst. Furthermore, this study examined the variables affecting the photocatalysis experiment, including the solution’s pH and the amount of catalyst. The results revealed that the ZnO/rGO photocatalyst reached its optimal efficiency under neutral pH conditions and at a concentration of 1 g/L, providing crucial information for practical use of these materials. This enriched article highlights the promising potential of ZnO-NPs and ZnO/rGOx nanocomposites as efficient photocatalysts for methylene blue degradation, paving the way for significant environmental applications in wastewater treatment.
- Open Access
Advancing Water Quality Research: K-Nearest Neighbor Coupled with the Improved Grey Wolf Optimizer Algorithm Model Unveils New Possibilities for Dry Residue Prediction
Monitoring stations have been established to combat water pollution, improve the ecosystem, promote human health, and facilitate drinking water production. However, continuous and extensive monitoring of water is costly and time-consuming, resulting in limited datasets and hindering water management research. This study focuses on developing an optimized K-nearest neighbor (KNN) model using the improved grey wolf optimization (I-GWO) algorithm to predict dry residue quantities. The model incorporates 20 physical and chemical parameters derived from a dataset of 400 samples. Cross-validation is employed to assess model performance, optimize parameters, and mitigate the risk of overfitting. Four folds are created, and each fold is optimized using 11 distance metrics and their corresponding weighting functions to determine the best model configuration. Among the evaluated models, the Jaccard distance metric with inverse squared weighting function consistently demonstrates the best performance in terms of statistical errors and coefficients for each fold. By averaging predictions from the models in the four folds, an estimation of the overall model performance is obtained. The resulting model exhibits high efficiency, with remarkably low errors reflected in the values of R, R2, R2ADJ, RMSE, and EPM, which are reported as 0.9979, 0.9958, 0.9956, 41.2639, and 3.1061, respectively. This study reveals a compelling non-linear correlation between physico-chemical water attributes and the content of dry tailings, indicating the ability to accurately predict dry tailing quantities. By employing the proposed methodology to enhance water quality models, it becomes possible to overcome limitations in water quality management and significantly improve the precision of predictions regarding critical water parameters.
Open AccessAdvancing Water Quality Research: K-Nearest Neighbor Coupled with the Improved Grey Wolf Optimizer Algorithm Model Unveils New Possibilities for Dry Residue Prediction
Monitoring stations have been established to combat water pollution, improve the ecosystem, promote human health, and facilitate drinking water production. However, continuous and extensive monitoring of water is costly and time-consuming, resulting in limited datasets and hindering water management research. This study focuses on developing an optimized K-nearest neighbor (KNN) model using the improved grey wolf optimization (I-GWO) algorithm to predict dry residue quantities. The model incorporates 20 physical and chemical parameters derived from a dataset of 400 samples. Cross-validation is employed to assess model performance, optimize parameters, and mitigate the risk of overfitting. Four folds are created, and each fold is optimized using 11 distance metrics and their corresponding weighting functions to determine the best model configuration. Among the evaluated models, the Jaccard distance metric with inverse squared weighting function consistently demonstrates the best performance in terms of statistical errors and coefficients for each fold. By averaging predictions from the models in the four folds, an estimation of the overall model performance is obtained. The resulting model exhibits high efficiency, with remarkably low errors reflected in the values of R, R2, R2ADJ, RMSE, and EPM, which are reported as 0.9979, 0.9958, 0.9956, 41.2639, and 3.1061, respectively. This study reveals a compelling non-linear correlation between physico-chemical water attributes and the content of dry tailings, indicating the ability to accurately predict dry tailing quantities. By employing the proposed methodology to enhance water quality models, it becomes possible to overcome limitations in water quality management and significantly improve the precision of predictions regarding critical water parameters.
- Open Access
- 5 May 2023
- Published by MDPI AG in Preprints.org
Effective Electrical Conductivity Performance of a 25% Antimo-Nial Lead Alloy-Air Battery Cell Made With Esr Open Cell Foams As Electrode
The global context of research for new sustainable energy storage technologies makes it a very active sector with significant scientific and economic challenges. Indeed, due to the irregular development of renewable energies and the shutdown of traditional power facilities, it is difficult to maintain a stable balance in terms of supply and demand: energy storage can help in particular for substantial changes in the latter. Metal air batteries have a higher energy density and are safer than other available energy storage devices. Based on the existing and proven lead-acid battery technology, this paper proposed an open cell foam manufactured by the Excess Salt Replication process for use as an anode for lead-air battery cellsies with sulphuric acid as the electrolyte. This will save lead and reduce the battery weight. A 25% antimonial lead alloy was used to produce open cell foams with a cell diameter between 2 mm and 5 mm for the antimonial lead-air battery. Preliminary results of the effective electrical conductivity of self-discharged primary battery cells, measured experimentally, showed that all antimonial lead foam-air battery cellsies performed better than that made from the same dense non porous antimonial lead alloy. This is generally due to their important specific surface area where oxidation-reduction reactions took place. A correlation between the effective electrical conductivity and the cell diameter has been established and the highest conductivity was obtained with a cell diameter of 5mm. The feasibility of such an electrical system has been demonstrated.
- 5 May 2023
- Published by MDPI AG in Preprints.org
Open AccessEffective Electrical Conductivity Performance of a 25% Antimo-Nial Lead Alloy-Air Battery Cell Made With Esr Open Cell Foams As Electrode
The global context of research for new sustainable energy storage technologies makes it a very active sector with significant scientific and economic challenges. Indeed, due to the irregular development of renewable energies and the shutdown of traditional power facilities, it is difficult to maintain a stable balance in terms of supply and demand: energy storage can help in particular for substantial changes in the latter. Metal air batteries have a higher energy density and are safer than other available energy storage devices. Based on the existing and proven lead-acid battery technology, this paper proposed an open cell foam manufactured by the Excess Salt Replication process for use as an anode for lead-air battery cellsies with sulphuric acid as the electrolyte. This will save lead and reduce the battery weight. A 25% antimonial lead alloy was used to produce open cell foams with a cell diameter between 2 mm and 5 mm for the antimonial lead-air battery. Preliminary results of the effective electrical conductivity of self-discharged primary battery cells, measured experimentally, showed that all antimonial lead foam-air battery cellsies performed better than that made from the same dense non porous antimonial lead alloy. This is generally due to their important specific surface area where oxidation-reduction reactions took place. A correlation between the effective electrical conductivity and the cell diameter has been established and the highest conductivity was obtained with a cell diameter of 5mm. The feasibility of such an electrical system has been demonstrated.