Effect of Drive Side Pressure Angle and Addendum on Mesh Stiffness of the Gears with Low and High Contact Ratios
Open Access
- 13 March 2026
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 16 (6) , 2755
Abstract
Gears are one of the most important machine elements widely used to transmit motion and power in various machines. The gear tooth stiffness has a significant impact on the load distribution, vibration characteristics, and overall efficiency of gear systems. Therefore, accurate analysis of tooth stiffness is crucial for optimizing gear performance and ensuring reliable operation. In this study, the effects of geometric parameters on single tooth stiffness (STS) and time-varying mesh stiffness (TVMS) of involute spur gears are investigated numerically. The gear design parameters, such as drive side pressure angle (DSPA) (20°, 25°, 30°), addendum (1–1.5 × module), and dedendum (1.25–1.7 × module), are varied. Gear configurations with both low contact ratio (LCR) and high contact ratio (HCR) are evaluated. Parametric models are first developed using MATLAB, and then 3D CAD models are created in CATIA for static structural analysis in ANSYS Workbench. The results indicate that increasing the pressure angle enhances stiffness in the tooth root region, whereas the effect is less significant near the tooth tip. Increasing the addendum length generally reduces stiffness. In some cases, a rise in contact ratio results in up to a 25% increase in mesh stiffness. These findings demonstrate that single tooth and mesh stiffness can be optimized through precise control of gear geometry. Ultimately, the study provides valuable insights for improving gear performance and durability through informed design choices.Keywords
This publication has 31 references indexed in Scilit:
- An improved model for time-varying mesh stiffness of super-high-contact-ratio helical gear pair considering contact disparities on differently sliced fractal surfacesCommunications in Nonlinear Science and Numerical Simulation, 2025
- An Innovative Collaborative Design of Shape and Performance for Super-High-Contact-Ratio Spiral Bevel GearInternational Journal of Precision Engineering and Manufacturing, 2023
- Performance Evaluation of Low- and High-Contact Ratio Spur Gears: Dynamic Response and Bending StrengthJournal of Vibration Engineering & Technologies, 2022
- Fracture characteristics of asymmetric high contact ratio spur gear based on strain energy release rateEngineering Failure Analysis, 2022
- Effects of rim thickness and drive side pressure angle on gear tooth root stress and fatigue crack propagation lifeEngineering Failure Analysis, 2021
- Fault mode analysis and detection for gear tooth crack during its propagating process based on dynamic simulation methodEngineering Failure Analysis, 2017
- Analytical model for mesh stiffness calculation of spur gear pair with non-uniformly distributed tooth root crackEngineering Failure Analysis, 2016
- On gear tooth stiffness evaluationComputers & Structures, 2014
- Crack behavior in a high contact ratio spur gear tooth and its effect on mesh stiffnessEngineering Failure Analysis, 2013
- The Geometry of Involute Gears1987