Study on High-Temperature Activated Products and Hydration Properties of Aga Soil in Tibet for Cement Concrete
Open Access
Abstract
In order to impart the properties of cementitious material to the Tibetan Agar soil, two high-temperature activation mechanisms (HTMA, HTMB) were designed in this study, and the products and hydration-hardening properties of Tibetan Agar soil high-temperature activation mechanism were analyzed by means of SEM, XRD, and XRF. The results show that the main components of Tibetan Aga soil are calcite and quartz; Aga soil is activated by HTMA high-temperature activation, forming the main products of CaO, C2S, CaSiO3, and CaAl2Si2O8, and its products have both air-hardening and water-hardening characteristics; Aga soil is activated by HTMB high-temperature activation, and when the temperature reaches 1250 °C when the clinker is not found in the CaO, the generation of C2S, C3S, C3A, C4AF, and Mg2SiO4 minerals with good water-hardening cementitious properties occurs when the temperature rises to 1350 °C, although the formation of some inert minerals that do not have the cementitious properties, but this temperature activation products of the thermodynamic properties of the best; Enhancing the value of lime saturation degree (KH) and silicon rate (SM) can promote the formation of the products of the C2S and C3S, increase the reactivity of the Aga soil activation products, and increase the hydration heat as well as compressive and flexural strength, combined with the results of the hydration heat and mechanical test, KH is recommended to be 0.9~0.94, SM is recommended to be 1.8~2.4, and alumina ratio (IM) is recommended to be 1.8~2.4 when Aga soil is used with raw materials.Keywords
Funding Information
- National Natural Science Foundation of China (52178427, 52178428, XZJTKJ [2020]04)
- Department of Transport of Tibet Autonomous Region (52178427, 52178428, XZJTKJ [2020]04)
This publication has 7 references indexed in Scilit:
- Assessment of Natural Additives Modified Lime Mortars for Repair of Historic Structures with Strength, Durability and Microstructural ParametersPeriodica Polytechnica Civil Engineering, 2022
- A sustainable production of natural hydraulic lime mortars through bio-amendmentConstruction and Building Materials, 2022
- Contribution of thermal analysis in the characterization of lime-based mortars with oxblood additionThermochimica Acta, 2019
- Development of a lime based grout for cracks repair in earthen constructionsConstruction and Building Materials, 2016
- Natural hydraulic lime versus cement for blended lime mortars for restoration worksConstruction and Building Materials, 2015
- Corrosion of rebar in concrete under cyclic freeze–thaw and Chloride salt actionConstruction and Building Materials, 2014
- Research on Two Traditional Silicate Materials in China’s Ancient BuildingJournal of Inorganic Materials, 2011