Process optimization studies of high performance recordable minidiscs
- 15 April 1997
- journal article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 81 (8) , 3842-3844
Abstract
In this study, the effect of process parameters on magnetic and recording properties of MiniDiscs is reported. Processes have been tailored to optimize the recording performance of MiniDiscs, such as carrier-to-noise ratio (CNR) at low magnetic fields, recording power margin, and recording power threshold. At higher deposition pressures or lower deposition rates of TbFeCoCr, the external bias field sensitivity of the carrier becomes worse but the noise at high bias fields (>200 Oe) decreases, resulting in improved CNR at high bias fields. Disks with TbFeCoCr sputtered at low pressure or high deposition rates produce a high error rate at high recording power (>4.5 mW), due to jitter noise caused by interference of neighboring magnetic domains. The power margin of the disks is strongly affected by the pressure and deposition rate of TbFeCoCr. When the Curie temperature of the TbFeCoCr layer is lowered by 30 °C (alloy change), the power margin decreases significantly and CNR is decreased by ∼2 dB because of low Kerr rotation. CNR values well above 49.5 dB are easily achieved on MiniDiscs with optimized TbFeCoCr and SiN layers.Keywords
This publication has 3 references indexed in Scilit:
- MAGNETIC CAPPING LAYER EFFECT OF PtCo ALLOY FILM COUPLED WITH TbFeCoJournal of the Magnetics Society of Japan, 1991
- Soft magnetic characteristics of multilayered films with Fe-Al-Si layers.Journal of the Magnetics Society of Japan, 1991
- Thermomagnetic writing in Tb-Fe: Modeling and comparison with experimentJournal of Applied Physics, 1988