Validation and Practical Application of a Data Reduction Software for the Analysis of Data from Stress Relief Tests
Open Access
- 25 April 2022
- journal article
- research article
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 40 (7) , 3779-3797
Abstract
In his work "Rock Anisotropy and the Theory of Stress Measurements", Amadei (1983) highlights the importance of the correct geological-technical characterisation of the rocks involved in open pit or underground excavation works. At the laboratory of Geomechanics and Geotechnology (IGG-CNR, Polytechnic of Turin), a data reduction software has been developed which, based on the theory developed by Amadei, allows the estimation of the main stresses acting in selected volumes of rock, on the basis of strains resulting from over-coring, possibly taking into account the transverse isotropy of the material. This paper, after listing the most popular techniques for assessing the state of stress in on-site rocks, focuses on the stress relief method. In particular, the validation tests of the software, called BM2000, are presented, comparing the calculated results with those published by Amadei and with those provided by two software packages from the literature (Smith82, STRESsOUT). After having outlined the input data and the necessary adjustments for their application in the aforementioned software, the results obtained showed excellent correspondence, for the cases of both isotropic and transversely isotropic rock.Keywords
This publication has 21 references indexed in Scilit:
- Application of a new stress measurement device in underground marble quarrying, a case study2010
- Calculation of the Average Ground-Stress Components from Measurements of the Diametral Deformation of a Drill Hole2009
- Strain measurements with the borehole slotterTerra Nova, 1994
- SOME BASIC RECONSIDERATIONS FOR DETERMINATION METHODS OF STRESSES IN ANISOTROPIC ELASTIC MEDIUMDoboku Gakkai Ronbunshu, 1987
- Analysis of the hollow inclusion technique for measuring In Situ rock stressInternational Journal of Rock Mechanics and Mining Sciences, 1980
- Triaxial ‘hollow inclusion’ gauges for determination of rock stresses in situInternational Journal of Rock Mechanics and Mining Sciences, 1976
- A new development of the LNEC stress tensor gauge. 2F, 2R : ROCHA, M LISBON TECH. UNIV. P SILVERIO, A LNEC, LISBON, P PEDRO, JO LNEC, LISBON, P PROC. 3RD CONGRESS ISRN, DENVER 1974, V2, PART A, P464–467International Journal of Rock Mechanics and Mining Sciences, 1976
- The CSIR ?doorstopper? and triaxial rock stress measuring instrumentsRock Mechanics and Rock Engineering, 1971
- Determination of the stress in rock unaffected by boreholes or drifts, from measured strains or deformationsInternational Journal of Rock Mechanics and Mining Sciences, 1968
- A four-component borehole deformation gauge for the determination of in situ stresses in rock massesInternational Journal of Rock Mechanics and Mining Sciences, 1967