Simone Saltarin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Simone Saltarin has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Carmine Todaro
Politecnico di Torino DIATI Corso Duca degli Abruzzi 24 10129 Torino Italy
4 shared publications - Marilena Cardu
Department of Environment, Land and Infrastructure Engineering, Politecnico di Torino, Torino, Italy
3 shared publications - Chiara Deangeli
Department of Environment, Land and Infrastructure Engineering (DIATI), Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy
2 shared publications - Alfio Di Giovanni
DIATI Politecnico di Torino, 10129 Torino, Italy
1 shared publication - Andrea Carigi
DIATI Politecnico di Torino, 10129 Torino, Italy
1 shared publication - Daniele Peila
Department of Environment, Land and Infrastructure Engineering, Politecnico di Torino, Torino, Italy
1 shared publication
Latest Publications
- Open Access
- 11 April 2026
- Published by MDPI AG in Geosciences
- Vol. 16 (4) , 156
Sustainable Use of Waste Bentonite Slurry in Two-Component Grout Formulation for TBM: An Experimental Study
The management of waste bentonite slurry (WBS) produced during slurry shield TBM excavation involves environmental and operational challenges from the perspective of developing a more sustainable tunnelling construction process. In this study, the potential reuse of WBS as a complete replacement for bentonite in two-component grout formulations used for TBM backfilling is explored. A comprehensive laboratory testing program is conducted, in which the effects of WBS on the properties of two-component grout (unit weight, viscosity, bleeding, gel time, and mechanical strength) are assessed after various curing times, and the outcomes are compared with standard values commonly given in technical specifications. WBS produced from two different commercial bentonites is investigated. The results show that while the first formulation exhibits rapid setting and irregular gelation, the mix derived from the second bentonite demonstrates superior mechanical performance, increasing compressive strength by up to 40%. This enhancement is primarily governed by a physical filler effect, where fine soil particles optimize packing density and refine the microstructure. Consequently, the incorporation of selected types of WBS into a two-component grout could be a practicable approach, since it offers benefits in terms of mechanical performance, although careful mix design would be required to manage workability. This study shows how tunnelling can become more sustainable by reusing excavation waste and transforming it into a useful by-product.
- 11 April 2026
- Published by MDPI AG in Geosciences
- Vol. 16 (4) , 156
Open AccessSustainable Use of Waste Bentonite Slurry in Two-Component Grout Formulation for TBM: An Experimental Study
The management of waste bentonite slurry (WBS) produced during slurry shield TBM excavation involves environmental and operational challenges from the perspective of developing a more sustainable tunnelling construction process. In this study, the potential reuse of WBS as a complete replacement for bentonite in two-component grout formulations used for TBM backfilling is explored. A comprehensive laboratory testing program is conducted, in which the effects of WBS on the properties of two-component grout (unit weight, viscosity, bleeding, gel time, and mechanical strength) are assessed after various curing times, and the outcomes are compared with standard values commonly given in technical specifications. WBS produced from two different commercial bentonites is investigated. The results show that while the first formulation exhibits rapid setting and irregular gelation, the mix derived from the second bentonite demonstrates superior mechanical performance, increasing compressive strength by up to 40%. This enhancement is primarily governed by a physical filler effect, where fine soil particles optimize packing density and refine the microstructure. Consequently, the incorporation of selected types of WBS into a two-component grout could be a practicable approach, since it offers benefits in terms of mechanical performance, although careful mix design would be required to manage workability. This study shows how tunnelling can become more sustainable by reusing excavation waste and transforming it into a useful by-product.
- Open Access
- 12 August 2025
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 58 (12) , 13867-13893
A Method to Compute the Ultimate Displacements in Reinforced Earth Rockfall Protection Embankments: A Perspective for the Design
Rockfall protective embankments (RPEs) offer a cost-effective solution for mitigating rockfall hazards, particularly in scenarios involving high-energy or repeated impacts. Among the available technologies, reinforced earth embankments are widely adopted, although their design methodologies remain a subject of ongoing research. This study investigates the behavior of a reinforced earth RPE, with a focus on characterizing the evolution of the displacement field up to collapse induced by a localized punching force, representing the impact of a falling block, applied to one face of the structure. Two reinforcement configurations are examined: unidirectional geogrid and double-twist steel mesh with metallic clips. Given the scarcity of full-scale experimental data and the practical challenges associated with such tests, a series of reduced-scale tests was designed and conducted. Geometric and mechanical similitude was ensured through the application of the Buckingham $$\Pi$$ -theorem. The tests were performed under quasi-static conditions to isolate the displacement field associated with soil layer sliding, neglecting inertial effects. Throughout the tests, both force and displacement histories were continuously recorded and analyzed. The results provide valuable insights into the volume of embankment affected by impact and the pre-collapse displacement patterns for both reinforcement types. Two extended finite element method (XFEM) models were developed to simulate the behavior of each reinforcement configuration. Model calibration was enhanced using photogrammetric reconstruction of the embankment’s downslope face, with point cloud data collected throughout the testing phase, enabling accurate validation of simulated deformation patterns. Finally, a full-scale dynamic impact test from the literature was used to calibrate a real-scale numerical model and to assess the consistency between dynamic and quasi-static responses of the same embankment system.- 12 August 2025
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 58 (12) , 13867-13893
Open AccessA Method to Compute the Ultimate Displacements in Reinforced Earth Rockfall Protection Embankments: A Perspective for the Design
Rockfall protective embankments (RPEs) offer a cost-effective solution for mitigating rockfall hazards, particularly in scenarios involving high-energy or repeated impacts. Among the available technologies, reinforced earth embankments are widely adopted, although their design methodologies remain a subject of ongoing research. This study investigates the behavior of a reinforced earth RPE, with a focus on characterizing the evolution of the displacement field up to collapse induced by a localized punching force, representing the impact of a falling block, applied to one face of the structure. Two reinforcement configurations are examined: unidirectional geogrid and double-twist steel mesh with metallic clips. Given the scarcity of full-scale experimental data and the practical challenges associated with such tests, a series of reduced-scale tests was designed and conducted. Geometric and mechanical similitude was ensured through the application of the Buckingham $$\Pi$$ -theorem. The tests were performed under quasi-static conditions to isolate the displacement field associated with soil layer sliding, neglecting inertial effects. Throughout the tests, both force and displacement histories were continuously recorded and analyzed. The results provide valuable insights into the volume of embankment affected by impact and the pre-collapse displacement patterns for both reinforcement types. Two extended finite element method (XFEM) models were developed to simulate the behavior of each reinforcement configuration. Model calibration was enhanced using photogrammetric reconstruction of the embankment’s downslope face, with point cloud data collected throughout the testing phase, enabling accurate validation of simulated deformation patterns. Finally, a full-scale dynamic impact test from the literature was used to calibrate a real-scale numerical model and to assess the consistency between dynamic and quasi-static responses of the same embankment system. - Open Access
- 25 April 2022
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 40 (7) , 3779-3797
Validation and Practical Application of a Data Reduction Software for the Analysis of Data from Stress Relief Tests
In his work "Rock Anisotropy and the Theory of Stress Measurements", Amadei (1983) highlights the importance of the correct geological-technical characterisation of the rocks involved in open pit or underground excavation works. At the laboratory of Geomechanics and Geotechnology (IGG-CNR, Polytechnic of Turin), a data reduction software has been developed which, based on the theory developed by Amadei, allows the estimation of the main stresses acting in selected volumes of rock, on the basis of strains resulting from over-coring, possibly taking into account the transverse isotropy of the material. This paper, after listing the most popular techniques for assessing the state of stress in on-site rocks, focuses on the stress relief method. In particular, the validation tests of the software, called BM2000, are presented, comparing the calculated results with those published by Amadei and with those provided by two software packages from the literature (Smith82, STRESsOUT). After having outlined the input data and the necessary adjustments for their application in the aforementioned software, the results obtained showed excellent correspondence, for the cases of both isotropic and transversely isotropic rock.
- 25 April 2022
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 40 (7) , 3779-3797
Open AccessValidation and Practical Application of a Data Reduction Software for the Analysis of Data from Stress Relief Tests
In his work "Rock Anisotropy and the Theory of Stress Measurements", Amadei (1983) highlights the importance of the correct geological-technical characterisation of the rocks involved in open pit or underground excavation works. At the laboratory of Geomechanics and Geotechnology (IGG-CNR, Polytechnic of Turin), a data reduction software has been developed which, based on the theory developed by Amadei, allows the estimation of the main stresses acting in selected volumes of rock, on the basis of strains resulting from over-coring, possibly taking into account the transverse isotropy of the material. This paper, after listing the most popular techniques for assessing the state of stress in on-site rocks, focuses on the stress relief method. In particular, the validation tests of the software, called BM2000, are presented, comparing the calculated results with those published by Amadei and with those provided by two software packages from the literature (Smith82, STRESsOUT). After having outlined the input data and the necessary adjustments for their application in the aforementioned software, the results obtained showed excellent correspondence, for the cases of both isotropic and transversely isotropic rock.
- Open Access
Precision Rock Excavation: Beyond Controlled Blasting and Line Drilling
The strictness of the result of an excavation, whether mechanical or by means of explosives, is naturally conditioned by its objective and, therefore, by the type of technique applied to achieve it. To attain the best results in terms of rock breakage, and with respect to the final profile, it is important to evaluate the specific excavation energy and its optimization. This study, being a revision of different techniques to achieve good quality of the final walls, focuses on evaluating the effects of those techniques on the quality of the result, in both open-pit and underground operations. Different geometries and configurations can be applied to both quarrying and tunneling blasts. This study aims to push contour blasts to their limits, and the main aspects are discussed in order to improve the blast parameters in daily practice.
Open AccessPrecision Rock Excavation: Beyond Controlled Blasting and Line Drilling
The strictness of the result of an excavation, whether mechanical or by means of explosives, is naturally conditioned by its objective and, therefore, by the type of technique applied to achieve it. To attain the best results in terms of rock breakage, and with respect to the final profile, it is important to evaluate the specific excavation energy and its optimization. This study, being a revision of different techniques to achieve good quality of the final walls, focuses on evaluating the effects of those techniques on the quality of the result, in both open-pit and underground operations. Different geometries and configurations can be applied to both quarrying and tunneling blasts. This study aims to push contour blasts to their limits, and the main aspects are discussed in order to improve the blast parameters in daily practice.
- Open Access
- 2 August 2021
- Published by MDPI AG in Preprints.org
Precision Rock Excavation: Beyond Controlled Blasting and Line Drilling
The strictness of the result of an excavation, whether mechanical or by means of explosives, is naturally conditioned by the objective, and therefore by the type of technique applied to achieve it. To attain the best results in terms of rock breakage and respect of the final profile, it’s important to evaluate the excavation specific energy and its optimization. This research focuses on evaluating the effects of different techniques on the quality of final walls in open-pit and underground operations. Different geometries and configurations can be applied to both quarrying and tunnelling blasts. The research is aimed to push contour blasts to their limits, and the main aspects are discussed in order to improve the blast parameters in the daily practice.
- 2 August 2021
- Published by MDPI AG in Preprints.org
Open AccessPrecision Rock Excavation: Beyond Controlled Blasting and Line Drilling
The strictness of the result of an excavation, whether mechanical or by means of explosives, is naturally conditioned by the objective, and therefore by the type of technique applied to achieve it. To attain the best results in terms of rock breakage and respect of the final profile, it’s important to evaluate the excavation specific energy and its optimization. This research focuses on evaluating the effects of different techniques on the quality of final walls in open-pit and underground operations. Different geometries and configurations can be applied to both quarrying and tunnelling blasts. The research is aimed to push contour blasts to their limits, and the main aspects are discussed in order to improve the blast parameters in the daily practice.
- Open Access
- 22 July 2021
- Published by MDPI AG in Preprints.org
Analysis of the Behaviour of Rocks Under Cyclic Loads
The cyclic load applied to civil and mining structures can lead to a reduction of the materials’ strength, different from that which would occur with a monotonous load. Numerous cases can be found where the decay of the rock parameters subjected to this type of stress leads to progressive or sudden collapse: among them, tunnel walls, pillars and slabs in mining operations, roads with a heavy vehicle transit, abutments of bridges and dams can be quoted. The topic can therefore be fundamental for a correct structural design, to avoid problems during the life of the structure. However, given the heterogeneity of the rock materials and the difficulty of their characterization under this aspect, an unequivocal analysis is hardly achievable. Then, the discussion initially develops through a general historical review of the concept of fatigue, with a synthetic collection of case histories. The laboratory tests on rock samples are then examined and the most important results obtained are discussed. Finally, a comparison between different types of tests is proposed. The experimental data are expressed through the Wӧhler diagram. The goal is to fill the lack of design codes or standards in the field of cyclic stresses applied to rock materials, the understanding of its effect being of great interest in order to apply suitable parameters in the design phase.
- 22 July 2021
- Published by MDPI AG in Preprints.org
Open AccessAnalysis of the Behaviour of Rocks Under Cyclic Loads
The cyclic load applied to civil and mining structures can lead to a reduction of the materials’ strength, different from that which would occur with a monotonous load. Numerous cases can be found where the decay of the rock parameters subjected to this type of stress leads to progressive or sudden collapse: among them, tunnel walls, pillars and slabs in mining operations, roads with a heavy vehicle transit, abutments of bridges and dams can be quoted. The topic can therefore be fundamental for a correct structural design, to avoid problems during the life of the structure. However, given the heterogeneity of the rock materials and the difficulty of their characterization under this aspect, an unequivocal analysis is hardly achievable. Then, the discussion initially develops through a general historical review of the concept of fatigue, with a synthetic collection of case histories. The laboratory tests on rock samples are then examined and the most important results obtained are discussed. Finally, a comparison between different types of tests is proposed. The experimental data are expressed through the Wӧhler diagram. The goal is to fill the lack of design codes or standards in the field of cyclic stresses applied to rock materials, the understanding of its effect being of great interest in order to apply suitable parameters in the design phase.