Two-point diameter calibration of a sphere using a micro-coordinate measuring machine at NMIJ
- 1 April 2022
- journal article
- research article
- Published by IOP Publishing in Metrologia
- Vol. 59 (2) , 024005
Abstract
The National Metrology Institute of Japan (NMIJ) has developed a highly accurate two-point diameter measurement method of a sphere using a micro-coordinate measuring machine (µ-CMM) with a low-force two-dimensional touch probe. The measured sphere is used as a reference to calibrate the probe of other µ-CMM in industry. Our strategy for measuring sphere’s diameter is that the probe radius of NMIJ’s µ-CMM is calibrated using a reference gauge block, and the NMIJ’s µ-CMM using the calibrated probe measures the mean two-point diameter of a sphere. To achieve the highly accurate calibration of the reference gauge block, we have adopted a double-sided interferometer (DSI) and an atomic force microscopy (AFM). The DSI measures the length of gauge block without wringing. The phase correction value of the gauge block is evaluated by measuring the surface roughness using the AFM. Using the DSI and AFM, the mechanical length of reference gauge block was obtained with the expanded uncertainty of 13 nm (k = 2). Then, the probe radius of NMIJ’s µ-CMM was also calibrated using the reference gauge block calibrated by the DSI and the AFM. The µ-CMM’s probe radius was obtained with the expanded uncertainty of 10 nm (k = 2). Finally, the µ-CMM measured the mean two-point diameter of a sphere with the expanded uncertainty 21 nm (k = 2) was demonstrated.Keywords
Funding Information
- National Institute of Advanced Industrial Science and Technology
- Mitutoyo Association for Science and Technology
- Japan Society for the Promotion of Science (JP21H01232)
This publication has 19 references indexed in Scilit:
- Challenges on double ended gauge block interferometry unveiled by the study of a prototype at PTBMetrologia, 2012
- Volume measurements of28Si spheres using an interferometer with a flat etalon to determine the Avogadro constantMetrologia, 2011
- Volume determination of the Avogadro spheres of highly enriched28Si with a spherical Fizeau interferometerMetrologia, 2011
- Ultraprecision micro-CMM using a low force 3D touch probeMeasurement Science and Technology, 2007
- Development of a New Interferometric Measurement System for Determining the Main Characteristics of Gauge BlocksCIRP Annals, 2006
- Development of a low-cost micro-CMM for 3D micro/nano measurementsMeasurement Science and Technology, 2006
- Development of a New Sphere Diameter Measuring MachineJournal of the Japan Society for Precision Engineering, Contributed Papers, 2006
- Compact I2-Stabilized Frequency-Doubled Nd:YAG Laser for Long Gauge Block InterferometerJapanese Journal of Applied Physics, 2003
- Design of a High-Precision 3D-Coordinate Measuring MachineCIRP Annals, 1998
- Refractive index of air: new equations for the visible and near infraredApplied Optics, 1996