Relationship between Rheological Behaviour and Final Structure ofand YSZ Foams Produced by Replica
Open Access
- 1 January 2012
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2012, 1-9
Abstract
Using rheological parameters of ceramic suspensions, it is possible to taylor the structure of the ceramic foams produced by replica. This method consists in the impregnation of a polymeric flexible template (polyurethane foam) with a ceramic suspension (slurry) containing the appropriate additives, followed by burning out organic compounds and additives and sintering the ceramic structure. In this work, ceramic foams were produced by the replica method from Al2O3and 3% Y2O3-ZrO2. Rheological parameters of the ceramic suspensions were investigated to improve the mechanical performance of final structures. Different types and quantities of raw materials were combined in order to select the formulations for ceramic foams. The parameters that have a significant influence on the process are the binder type and the amount of solids. Significant changes on the hysteresis area of the suspensions resulted in a lower density of macrodefects in the material. Likewise, when the shear rate viscosity is enhanced, the thickness of the struts increased proportionally. Lastly, when the hysteresis area magnitude and the ceramic thickness increased, the material with higher uniformity was internally densified, and the stress concentration of the internal defects was smoothedKeywords
Funding Information
- National Council for Scientific and Technological Development
- CAPES, Brazil
This publication has 25 references indexed in Scilit:
- Rheological behaviour of kaolin/talc/alumina suspensions for manufacturing cordierite foamsApplied Clay Science, 2007
- Processing Routes to Macroporous Ceramics: A ReviewJournal of the American Ceramic Society, 2006
- Viscosity of Electrostatically Stabilized Dispersions of Monodispersed, Bimodal, and Trimodal Silica ParticlesJournal of the American Ceramic Society, 2005
- Novel Method To Optimize the Structure of Reticulated Porous CeramicsJournal of the American Ceramic Society, 2004
- Cellular Ceramics: Intriguing Structures, Novel Properties, and Innovative ApplicationsMRS Bulletin, 2003
- Preparation of silicon carbide reticulated porous ceramicsMaterials Science and Engineering: A, 2002
- Influence of dispersant on powders dispersion and properties of zirconia green compactsCeramics International, 2000
- Investigation of Strut Crack Formation in Open Cell Alumina CeramicsJournal of the American Ceramic Society, 1994
- Factors Controlling the Fracture Resistance of Brittle Cellular MaterialsJournal of the American Ceramic Society, 1991
- Evaluation of Strut Strength in Open‐Cell CeramicsJournal of the American Ceramic Society, 1989