Centrifugally spun carbon fibers prepared from aqueous poly(vinylpyrrolidone) solutions as binder‐free anodes in lithium‐ion batteries
Authors:
- 31 December 2020
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (18)
Abstract
Aqueous solutions of poly(vinylpyrrolidone) (PVP) of various concentrations (20, 25, and 28 wt%) were successfully spun into fibers by centrifugal spinning. The pristine PVP fibers were annealed and carbonized to produce flexible carbon fibers for use as binder‐free anodes in lithium‐ion batteries. These flexible carbon fibers were prepared by developing a novel three‐step heat treatment to reduce the residual stresses in the pristine PVP precursor fibers, and to prevent fiber degradation during carbonization. The thermogravimetric analysis data showed that the annealed fibers yielded a residual mass percentage of 36.0% while the pristine PVP fibers suffered a higher mass loss and only retained 26.5% of original mass above 450 °C (under nitrogen). The electrochemical performance of the carbon‐fiber anodes was evaluated by conducting galvanostatic charge/discharge, rate performance, and cycle voltammetry experiments. The 20, 25, and 28 wt% derived binder‐free anodes delivered specific charge capacities of 205, 189, and 275 mAh g−1, respectively, after the first cycle at a current density of 100 mA g−1. The results obtained in this work indicate that a feasible pathway towards a large‐scale production of carbon‐fiber anodes from a 100% aqueous solution can be achieved via centrifugal spinning and subsequent heat treatment.Keywords
This publication has 30 references indexed in Scilit:
- Mesoporous carbon nanofibers with a high surface area electrospun from thermoplastic polyvinylpyrrolidoneNanoscale, 2012
- Method for Production of Polymer and Carbon Nanofibers from Water-Soluble PolymersNano Letters, 2012
- α-Fe2O3 Nanoparticle-Loaded Carbon Nanofibers as Stable and High-Capacity Anodes for Rechargeable Lithium-Ion BatteriesACS Applied Materials & Interfaces, 2012
- Production and characterization of polycaprolactone nanofibers via forcespinning™ technologyJournal of Applied Polymer Science, 2012
- Preparation, structure and supercapacitance of bonded carbon nanofiber electrode materialsCarbon, 2011
- Thermal study on electrospun polyvinylpyrrolidone/ammonium metatungstate nanofibers: optimising the annealing conditions for obtaining WO3 nanofibersJournal of Thermal Analysis and Calorimetry, 2011
- Recent developments in nanostructured anode materials for rechargeable lithium-ion batteriesEnergy & Environmental Science, 2011
- Fabrication of Electrospinning‐Derived Carbon Nanofiber Webs for the Anode Material of Lithium‐Ion Secondary BatteriesAdvanced Functional Materials, 2006
- Raman spectroscopy of carbon nanotubesPhysics Reports, 2005
- Mechanisms for Lithium Insertion in Carbonaceous MaterialsScience, 1995