Friction of hybrid and steel ball bearings in mixed lubrication
- 8 October 2025
- journal article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 240 (6) , 1226-1233
Abstract
Hybrid ball bearings with rolling elements made of silicon nitride show important friction, temperature, and power loss benefits compared to full steel bearings under mixed lubrication. This is of particular interest for electrical vehicle (EV) range extension in the automotive industry, where hybrid bearings are used in the electric motor with integrated gearbox to avoid electrical erosion damage. Same benefits can be obtained for industrial electric motors with high frequency variable speed drives where the hybrid bearing acts as an insulator against electrical currents. In this study bearing temperatures and system torque are measured in a modified FZG gearbox for both hybrid and steel ball bearings. The gear set was designed with a small helix angle to create an axial preload to the sets of 6306 deep groove ball bearings with C3 clearance. To reach mixed lubrication conditions, a small amount of low viscous oil was used operating at high temperatures up to a maximum of 100°C. Results in this study show that for mixed lubrication the hybrid bearings run 2-4°C cooler compared to steel ones, while the temperature gradient is similar. Due to lower friction in the hybrid bearings, the FZG test box efficiency is on average improved with 3%.Keywords
This publication has 10 references indexed in Scilit:
- Thermal behavior in rolling bearing applications: Comparison of steel and ceramic materials applied to tapered rollersProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2022
- Grease Performance in Ball and Roller Bearings for All-Steel and Hybrid BearingsTribology Transactions, 2021
- A model for hybrid bearing life with surface and subsurface survivalWear, 2019
- Thermal Conductivity and Flash TemperatureTribology Letters, 2019
- Comparison of Power Losses and Temperatures between an All-Steel and a Direct Outer Ring–Cooled, Hybrid 133-mm-Bore Ball Bearing at Very High SpeedsTribology Transactions, 2016
- Friction Torque Measurement in Partial Hybrid S-C Angular Contact Ball BearingsApplied Mechanics and Materials, 2014
- Thermal modelling of a back-to-back gearbox test machine: Application to the FZG test rigProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2012
- Parametric Testing and Heat Generation Modeling of 133-mm Bore Ball Bearings: Part II—Results with Silicon Nitride Rolling ElementsTribology Transactions, 2011
- Ceramic Materials in Hybrid Ball BearingsTribology Transactions, 1999
- The Performance of Ball Bearings With Silicon Nitride Ceramic Balls in High Speed Spindles for Machine ToolsJournal of Tribology, 1988