Transformation of fine structure of lamellar pearlite under deformation of rail steel
Open Access
- 1 March 2023
- journal article
- research article
- Published by National University of Science and Technology MISiS in Izvestiya. Ferrous Metallurgy
- Vol. 66 (1) , 50-56
Abstract
The defective substructure of polycrystalline bodies causes substructural hardening and mechanical properties. Perlite, which is the main structural component of rails, undergoes a significant transformation during deformation, which is accompanied by a number of processes. In this paper, the methods of modern physical materials science were used to study and analyze the defective substructure of perlite of lamellar morphology and the properties of rail steel subjected to destruction under deformation conditions by single-axis stretching of flat samples. It was established that the ultimate strength varies from 1247 to 1335 MPa, and the relative deformation to failure – from 0.69 to 0.75. The formation of three zones of the fracture surface was observed: fibrous, radial and shear zones. Their shape and sizes were analyzed. Deformation of rail steel is accompanied by destruction of cementite plates of perlite colonies and repeated release of nanoscale particles of tertiary cementite approximately 8.3 nm in size in the volume of ferrite plates. The main mechanisms of destruction of cementite plates are cutting and dissolution. The dislocation substructure is represented by a chaotic distribution of dislocations and their clusters. The scalar density of dislocations in ferrite increases from 3.2·1010 cm–2 in the initial state to 7.9·1010 cm–2 when it is destroyed. Deformation is accompanied by formation of internal stress fields, manifested in the form of bending extinction contours. The sources of stress fields are the interface of cementite and ferrite plates, as well as grain boundaries. Fragmentation of ferrite and cementite plates was revealed. The average size of cementite fragments is 9.3 nm. In fracture zone of the rail steel sample, rotation of perlite grains was noted, indicating the presence of a rotational mode of deformation. Electron microscopic images of cementite plates show a change in the contrast, which may be associated with the formation of Cottrell’s atmospheres.Keywords
This publication has 21 references indexed in Scilit:
- Nonlinear wave processes in a deformable solid treated as a hierarchically organized systemUspekhi Fizicheskih Nauk, 2012
- Atomic-scale mechanisms of deformation-induced cementite decomposition in pearliteActa Materialia, 2011
- Partially amorphous nanocomposite obtained from heavily deformed pearlitic steelMaterials Science and Engineering: A, 2009
- Structure analysis of ferrite in deformed pearlitic steel by means of X-ray diffraction method with synchrotron radiationScripta Materialia, 2004
- Decomposition of cementite in pearlitic steel due to plastic deformationMaterials Science and Engineering: A, 2003
- Atom probe study on the ductility of drawn pearlitic steelsScripta Materialia, 2002
- Comment on “Effect of interlamellar spacing on cementite dissolution during wire drawing of pearlitic steel wires”Scripta Materialia, 2001
- Cementite decomposition in heavily drawn pearlite steel wireScripta Materialia, 2001
- Direct evidence of cementite dissolution in drawn pearlitic steels observed by tomographic atom probeMaterials Science and Engineering: A, 1998
- Cementite dissolution in heavily cold drawn pearlitic steel wiresActa Materialia, 1997