Effect of Modified Silica Materials on Polyvinyl Chloride (PVC) Substrates to Obtain Transparent and Hydrophobic Hybrid Coatings
Authors:
- Violeta PurcarVioleta Purcar
- Valentin RădițoiuValentin Rădițoiu
- Alina RădițoiuARAlina Rădițoiu
- Florentina Monica RadulyFlorentina Monica Raduly
- Georgiana Cornelia IspasGIGeorgiana Cornelia Ispas
- Simona CăprărescuSimona Căprărescu
- Adriana Nicoleta FroneAFAdriana Nicoleta Frone
- Bogdan TricăBogdan Trică
- Cristian-Andi NicolaeCNCristian-Andi Nicolae
- Mihai AnastasescuMihai Anastasescu
- Hermine StroescuHermine Stroescu
Open Access
- 22 November 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (22) , 11044
Abstract
In this research, we report a simple and inexpensive way to prepare transparent and hydrophobic hybrid coatings through deposition of different silica materials on polyvinyl chloride (PVC) substrates. The silica materials were prepared using an acid-catalyzed sol–gel method at room temperature (25 ± 2 °C), using alkoxysilanes: tetraethoxysilane (TEOS), as the silica source, and ethoxydimethylvinylsilane (DMVES), triethoxyoctylsilane (OTES), and trimethoxyhexadecylsilane (HDTMES), as modifier agents. The obtained materials were characterized (either as powders or as thin films) by Fourier-transform infrared spectroscopy (FTIR), UV/Vis spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), atomic force microscopy (AFM), spectroscopic ellipsometry (SE), and water contact-angle measurements. UV/Vis spectra showed that the PVC substrate coated with the silica material containing TEOS/DMVES/OTES had a transmittance of about 90% in the wavelength range of 650–780 nm. The water contact angles increased from 83° for uncoated PVC substrate to ~94° for PVC substrates coated with the sol–gel silica materials. These PVC films with hybrid silica coatings can be used as the materials for outdoor applications, such as energy-generating solar panel window blinds or PVC clear Windmaster outdoor blinds.Keywords
This publication has 44 references indexed in Scilit:
- Physical boundaries within aggregates – differences between amorphous, para‐crystalline, and crystalline StructuresCrystal Research and Technology, 2015
- Preparation of superhydrophobic and transparent micro-nano hybrid coatings from polymethylhydroxysiloxane and silica ormosil aerogelsNano Convergence, 2014
- A convenient sol–gel approach to the preparation of nano-porous silica coatings with very low refractive indicesChemical Communications, 2014
- Sol–Gel Preparation of Hydrophobic Silica Antireflective Coatings with Low Refractive Index by Base/Acid Two-Step CatalysisACS Applied Materials & Interfaces, 2014
- Multifunctional Antireflection Coatings Based on Novel Hollow Silica–Silica NanocompositesACS Applied Materials & Interfaces, 2014
- Superhydrophobic and Omnidirectional Antireflective Surfaces from Nanostructured Ormosil ColloidsACS Applied Materials & Interfaces, 2013
- Dependence of surface properties of silylated silica on the length of silane armsAdsorption, 2012
- SiO2-TiO2 Nanostructure Films on Windshields Prepared by Sol-Gel Dip-Coating Technique for Self-Cleaning and Photocatalytic ApplicationsNanoscience and Nanotechnology, 2012
- Preparation of polymer/silica hybrid hard coatings with enhanced hydrophobicity on plastic substratesJournal of Non-Crystalline Solids, 2012
- Antibacterial Fluorinated Silica Colloid Superhydrophobic SurfacesLangmuir, 2011