GIGeorgiana Cornelia Ispas

Georgiana Cornelia Ispas

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Georgiana Cornelia Ispas has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Carbon Nanomaterials from Biomass Wastes

    by Stefan-Ovidiu Dima, Georgiana Ispas, Valentin Raditoiu, Radu-Claudiu Fierascu, Cristian-Andi Nicolae, Bogdan Trica, Florin Oancea

    Biomass represents carbon that has been sequestered from the environment by plants through photosynthesis and nutrition


  • Open Access

    Optical Behavior of Curcuminoid Hybrid Systems as Coatings Deposited on Polyester Fibers

    by Florentina Monica Raduly, Valentin Rădiţoiu, Alina Rădiţoiu, Violeta Purcar, Georgiana Ispas, Adriana Nicoleta Frone, Raluca Augusta Gabor, Cristian-Andi Nicolae

    The recent development of the “eco-friendly” current has brought to the attention of researchers natural dyes that are biodegradable, do not cause allergies and generally have anti-UV protection, and antioxidant and antibacterial properties. In this study, we aimed to obtain hybrid materials of the dye–host matrix type, by using the sol–gel process. The silica network was generated by tetraethylorthosilicates and modified with organic siloxane derivatives: phenyltriethoxysilane, 3-glycidoxypropyltriethoxysilane, dimethoxydimethylsilane and dimethoxydiphenylsilane. The nanocomposites obtained by embedding curcumin in siloxane matrices were deposited on polyester fabric and evaluated for their properties, relative to the type of organic network modifier used. Fabrics covered with curcuminoid hybrid systems provide a hydrophobic surface, have fluorescent properties and a UPF +50, and, therefore, they can be used in various fields where it is necessary for textiles to provide signaling, self-cleaning or protection properties against ultraviolet radiation. The coated textile materials have very good resistance properties after several repeated washing cycles, and maintain the original UV protection factor at high values even after washing or during rubbing tests.


  • Open Access

    Physicochemical and Morphological Properties of Hybrid Films Containing Silver-Based Silica Materials Deposited on Glass Substrates

    by Violeta Purcar, Valentin Rădiţoiu, Florentina Monica Raduly, Alina Rădițoiu, Mihai Anastasescu, Monica Popa, Simona Căprărescu, Raluca Şomoghi, Mariana Constantin, Cristina Firincă, et al.

    The main goal of this study was to present a facile and inexpensive approach for the preparation of hybrid coatings by the deposition under ambient air conditions of silver-based silica materials on glass substrates, which can be used to improve solar cells’ performance. The silica materials containing silver nanoparticles (AgNPs) were synthesized by the hydrolytic condensation of tetraethylorthosilicate (TEOS), triethoxymethylsilane (MTES), and trimethoxyhexadecylsilane (HDTMES), under acidic conditions, at room temperature (25 ± 2 °C). The silver nitrate solution (AgNO3, 0.1 wt. %) was used as a source of Ag+ ions. The final samples were investigated through Fourier Transform Infrared Spectroscopy–Attenuated Total Reflectance (FTIR–ATR), Transmission Electron Microscopy equipped with energy dispersive X–ray (TEM–EDX), UV–Vis spectroscopy, Atomic Force Microscopy (AFM), and Raman Spectroscopy (RS). The TEM images confirmed the formation of AgNPs and were found to be around 3 nm. It was observed that AgNPs were embedded in the silica matrix. EDX also confirmed the presence of the resulting AgNPs within the silica material. AFM images demonstrated that the morphology of the hybrid films’ surfaces can be changed as a function of sol–gel composition. RS analysis indicated that silanol groups were significantly present on the silver-based silica film surface. The UV–Vis spectra revealed that the hybrid coatings presented a reflectance of ~8%, at 550 nm. This study will enhance the value of nanocoating technology in optoelectronics, particularly in the development of nanostructures that improve the performance in thin-film solar cells.


  • Open Access

    Modeling the Properties of Curcumin Derivatives in Relation to the Architecture of the Siloxane Host Matrices

    by Florentina Monica Raduly, Valentin Rădiţoiu, Alina Rădiţoiu, Adriana Nicoleta Frone, Cristian Andi Nicolae, Violeta Purcar, Georgiana Ispas, Mariana Constantin, Iuliana Răut

    Research in the field of natural dyes has constantly focused on methods of conditioning curcumin and diversifying their fields of use. In this study, hybrid materials were obtained from modified silica structures, as host matrices, in which curcumin dyes were embedded. The influence of the silica network structure on the optical properties and the antimicrobial activity of the hybrid materials was monitored. By modifying the ratio between phenyltriethoxysilane:diphenyldimethoxysilane (PTES:DPDMES), it was possible to evaluate the influence the organosilane network modifiers had on the morphostructural characteristics of nanocomposites. The nanosols were obtained by the sol–gel method, in acid catalysis. The nanocomposites obtained were deposited as films on a glass support and showed a transmittance value (T measured at 550 nm) of around 90% and reflectance of about 11%, comparable to the properties of the uncovered support. For the coatings deposited on PET (polyethylene terephthalate) films, these properties remained at average values of T550 = 85% and R550 = 11% without significantly modifying the optical properties of the support. The sequestration of the dye in silica networks reduced the antimicrobial activity of the nanocomposites obtained, by comparison to native dyes. Tests performed on Candida albicans fungi showed good results for the two curcumin derivatives embedded in silica networks (11–18 mm) by using the spot inoculation method; in comparison, the alcoholic dye solution has a spot diameter of 20–23 mm. In addition, hybrids with the CA derivative were the most effective (halo diameter of 17–18 mm) in inhibiting the growth of Gram-positive bacteria, compared to the curcumin derivative in alcoholic solution (halo diameter of 21 mm). The results of the study showed that the presence of 20–40% by weight DPDMES in the composition of nanosols is the optimal range for obtaining hybrid films that host curcumin derivatives, with potential uses in the field of optical films or bioactive coatings.


  • Open Access

    Effect of Modified Silica Materials on Polyvinyl Chloride (PVC) Substrates to Obtain Transparent and Hydrophobic Hybrid Coatings

    by Violeta Purcar, Valentin Rădițoiu, Alina Rădițoiu, Florentina Monica Raduly, Georgiana Cornelia Ispas, Simona Căprărescu, Adriana Nicoleta Frone, Bogdan Trică, Cristian-Andi Nicolae, Mihai Anastasescu, et al.

    In this research, we report a simple and inexpensive way to prepare transparent and hydrophobic hybrid coatings through deposition of different silica materials on polyvinyl chloride (PVC) substrates. The silica materials were prepared using an acid-catalyzed sol–gel method at room temperature (25 ± 2 °C), using alkoxysilanes: tetraethoxysilane (TEOS), as the silica source, and ethoxydimethylvinylsilane (DMVES), triethoxyoctylsilane (OTES), and trimethoxyhexadecylsilane (HDTMES), as modifier agents. The obtained materials were characterized (either as powders or as thin films) by Fourier-transform infrared spectroscopy (FTIR), UV/Vis spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), atomic force microscopy (AFM), spectroscopic ellipsometry (SE), and water contact-angle measurements. UV/Vis spectra showed that the PVC substrate coated with the silica material containing TEOS/DMVES/OTES had a transmittance of about 90% in the wavelength range of 650–780 nm. The water contact angles increased from 83° for uncoated PVC substrate to ~94° for PVC substrates coated with the sol–gel silica materials. These PVC films with hybrid silica coatings can be used as the materials for outdoor applications, such as energy-generating solar panel window blinds or PVC clear Windmaster outdoor blinds.


  • Bilayer coatings based on silica materials and iron (III) phthalocyanine – Sensitized TiO2 photocatalyst

    by Violeta Purcar, Valentin Rădiţoiu, Alina Rădiţoiu, Florentina Monica Raduly, Raluca Manea, Adriana Frone, Mihai Anastasescu, Georgiana Cornelia Ispas, Simona Căprărescu


  • Open Access

    Preparation and Characterization of Some Sol-Gel Modified Silica Coatings Deposited on Polyvinyl Chloride (PVC) Substrates

    by Violeta Purcar, Valentin Rădițoiu, Alina Rădițoiu, Raluca Manea, Florentina Monica Raduly, Georgiana Cornelia Ispas, Adriana Nicoleta Frone, Cristian Andi Nicolae, Raluca Augusta Gabor, Mihai Anastasescu, et al.

    Transparent and antireflective coatings were prepared by deposition of modified silica materials onto polyvinyl chloride (PVC) substrates. These materials were obtained by the sol-gel route in acidic medium, at room temperature (25 °C), using different alkoxysilanes with various functional groups (methyl, vinyl, octyl or hexadecyl). Physicochemical and microstructural properties of resulted silica materials and of thin coatings were investigated through Fourier Transforms Infrared Spectroscopy (FTIR), UV-Vis spectroscopy, Thermal Gravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA), Atomic Force Microscopy (AFM) and ellipsometric measurements. Wetting behaviors of the silica coatings were evaluated by measurement of static contact angle against water. FTIR spectra of materials confirmed the high degree of cross-linking that result from the formation of the inorganic backbone through the hydrolysis and polycondensation reactions together with the formation of the organic network. These sol-gel silica coatings showed a reduction in the reflectance (10%) compared with uncoated PVC substrate. AFM reveals that the films are uniform, and adherent to the substrate, but their morphology is strongly influenced by the chemical composition of the coating matrices. These silica coatings can be useful for potential electronic and optical devices.


  • Open Access

    Fluorescent Silica Hybrid Film-Forming Materials Based on Salicylaldazine

    by Alina Raditoiu, Valentin Raditoiu, Florentina Monica Raduly, Georgiana Cornelia Ispas, Violeta Purcar, Adriana Nicoleta Frone, Raluca Manea, Luminita Eugenia Wagner, Mihai Anastasescu

    Fluorescent film-forming materials were obtained by embedding salicylaldazine (SAA) in silica hybrids generated by sol–gel processes from different silane precursors in acid catalysis. Tuned local environments for the fluorophore were generated in the hosting network by modifying silica sols with organic groups through the co-condensation of tetraethylortosilicate (TEOS) and different alkoxysilanes hydrolysis products. The photophysical properties of the luminescent hybrid films were studied in direct relationship with structural, textural, and surface properties and based on interactions between SAA species and the silica hosting network. Film-forming materials were studied in order to determine differences in absorption and fluorescence emission due to the environments around the fluorophore. The variations recorded in the fluorescence emission spectra of the hybrid films were related to interactions established between the fluorophore species and their sterically hindered surroundings of the host hybrid silica, where free molecular motions are restricted. The influence of the type and amount of network modifier and of the fluorophore loading on the transparency of the films and fluorescence intensity was also investigated. The study carried out led to the elucidation of the necessary conditions for obtaining luminescent film-forming materials with high luminescence intensity and transparency useful for the design of new light concentrators.


  • Open Access

    Preparation of Transparent and Antireflective Silica Thin Coatings on Plastic Substrates by Sol-Gel Process

    by Raluca Manea, Violeta Purcar, Valentin Rădițoiu, Alina Rădițoiu, Monica Florentina Raduly, Georgiana Cornelia Ispas, Adriana Frone, Cristian Andi Nicolae, Luminița Eugenia Wagner

    Due to their range of applications, from anti-icing to self-cleaning, low-adhesion, antibacterial.


  • Open Access

    Iron Oxide/Phosphatic Materials Composites with Potential Applications in Environmental Protection

    by Georgiana Cornelia Ispas, Raluca Manea, Roxana Ioana Brazdis, Anda Maria Baroi, Toma Fistos, Radu Claudiu Fierascu, Monica Florentina Raduly

    Currently, hydroxyapatite is probably the most researched material, due to its multiple applications in medical, environmental, or cultural heritage, when the classical structure is modified and calcium is displaced partially or totally with different metals. By changing the classical structure of the hydroxyapatite, new morphologies can be obtained, thus allowing final applications different from those of the initial hydroxyapatite material. However, their properties should be tuned for the desired application. In this context, the present paper describes the synthesis and characterization (through energy-dispersive X-ray fluorescence, X-ray diffraction, FTIR, thermal analysis, and transmission electron microscopy) of iron oxide/manganese-containing phosphatic phase composite materials, developed in order to obtain the enhancement of final environmental applications (photodegradation of dyes, adsorption of organic compounds). The composite material was tested for photocatalytic properties, after embedding in hydrosoluble film-forming materials. Photocatalytic coatings show different activity during the photodecomposition of Methylene Blue, used as a model of a contaminant. The photocatalytic activities of the materials were discussed in relationship with both the phosphatic materials and the magnetic components. Finally, other environmental applications were studied for the developed materials (adsorption of non-steroidal anti-inflammatory drugs—paracetamol and ibuprofen), revealing an enhancement of the adsorption capacity of the phosphatic material upon addition of the magnetic phase.