Study on the Allowable Temperature for Preventing Over Welding During Thermal Welding of Polyethylene Pipe
- 15 October 2014
- journal article
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 137 (2) , 021401
Abstract
Polyethylene (PE) pipe material may degrade into lower carbon number volatiles quickly during thermal welding when the welding temperature rises up to very high temperature. However, PE may also degrade into lower molecular weight (MW) polymer when subjected to a lower temperature. As a result, determination of the allowable temperature during thermal welding is crucial for guaranteeing the quality of welding joint. In this paper, a typical commercial PE100 material was chosen to conduct thermogravimetic analysis (TGA) and gel permeation chromatography (GPC) tests. The thermal degradation behavior of PE100 was investigated in dynamic and isothermal mode. The composition of the residue after thermal degradation was also analyzed through MW and MW distribution (MWD) measurements. Based on the experimental results, the initial temperature of thermal degradation with volatilization was derived and the thermal degradation process was studied in detail. To limit the degree of thermal degradation within a certain range during thermal welding of PE pipe, the allowable welding temperature for typical commercial PE100 material was determined.Keywords
This publication has 10 references indexed in Scilit:
- Structural Integrity of HDPE Piping and Joints in Nuclear Safety-Related Applications2012
- Defects classification and failure modes of electrofusion joint for connecting polyethylene pipesJournal of Applied Polymer Science, 2011
- High-Density Polyethylene Piping Butt-Fusion Joint Examination Using Ultrasonic Phased ArrayJournal of Pressure Vessel Technology, 2010
- Thermal degradation behaviors of polyethylene and polypropylene. Part I: Pyrolysis kinetics and mechanismsEnergy Conversion and Management, 2010
- Kinetic study of the thermal degradation of high density polyethylenePolymer Degradation and Stability, 2006
- Reexamination of the Pyrolysis of Polyethylene: Data Needs, Free-Radical Mechanistic Considerations, and Thermochemical Kinetic Simulation of Initial Product-Forming PathwaysMacromolecules, 2003
- A thermogravimetric study on thermal degradation of polyethyleneJournal of Analytical and Applied Pyrolysis, 2003
- Kinetics of pyrolysis of high density polyethylene. Comparison of isothermal and dynamic experimentsJournal of Analytical and Applied Pyrolysis, 2002
- A review of the electrofusion joining process for polyethylene pipe systemsPolymer Engineering & Science, 1997
- Thermogravimetric studies on the thermal decomposition of polyethyleneJournal of Analytical and Applied Pyrolysis, 1996