Research on a Fault Location Method for a Pole-to-Pole Short-Circuit Fault in an LCC-MMC Hybrid DC Transmission System
Authors:
Open Access
- 10 September 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 165683-165692
Abstract
When a pole-to-pole short-circuit fault occurs in an LCC-MMC hybrid DC transmission system, the fault characteristics are affected by the distributed capacitance and the transition resistance that cause a dead zone in the fault location and poor accuracy in determining the fault location. In view of this, this paper proposes a fault location method for the LCC-MMC hybrid DC transmission system. By analyzing the fault characteristics of the rectifier station and inverter station, the fault circuit equation of the rectifier side is analyzed, and the relationship between the fault distance and the transition resistance is deduced. The fault circuit of the inverter side is isolated by blocking CDSM-MMC, which can clear the fault current on the inverter side and thus eliminate the influence of the transition resistance. The steady-state fault information of the LCC DC outlet is used to eliminate the effect of distributed capacitance and achieve an accurate fault location. The LCC-MMC hybrid DC transmission system model is built on the PSCAD / EMTDC simulation platform. Simulation results show that the proposed fault location method can effectively avoid the transition resistance and distributed capacitance influences and thus obtain high fault location accuracy. Moreover, an accurate fault location can be achieved with a narrow fault data window length.Keywords
Funding Information
- National Basic Research Program of China (No. 2016YFB0900200)
- Science and Technology Foundation of China South Grid (YNKJXM20191459)
- National Natural Science Foundation of China (No. 51707026)
This publication has 19 references indexed in Scilit:
- STATCOM Operation Scheme of the CDSM-MMC During a Pole-to-Pole DC FaultIEEE Transactions on Power Delivery, 2015
- A Traveling-Wave-Based Methodology for Wide-Area Fault Location in Multiterminal DC SystemsIEEE Transactions on Power Delivery, 2014
- Direct-Current Predictive Control Strategy for Inhibiting Commutation Failure in HVDC ConverterIEEE Transactions on Power Systems, 2014
- A Novel Fault-Location Method for HVDC Transmission Lines Based on Similarity Measure of Voltage SignalsIEEE Transactions on Power Delivery, 2013
- Natural Frequency-Based Line Fault Location in HVDC LinesIEEE Transactions on Power Delivery, 2013
- DC Ring-Bus Microgrid Fault Protection and Identification of Fault LocationIEEE Transactions on Power Delivery, 2013
- Fault Location in a Zonal DC Marine Power System Using Active Impedance EstimationIEEE Transactions on Industry Applications, 2013
- A New Double-Ended Fault-Location Scheme for Utilization in Integrated Power SystemsIEEE Transactions on Power Delivery, 2013
- Traveling-wave-based line fault location in star-connected multiterminal HVDC systems2013
- Short-Circuit and Ground Fault Analyses and Location in VSC-Based DC Network CablesIEEE Transactions on Industrial Electronics, 2011