Abstract
Carbon nanotube (CNT) wires are increasingly used in environments that experience intense radiation, yet their behaviour under energetic proton exposure remains insufficiently understood. This work compares treated and untreated wires of diameters 11, 19 and 50 micrometres irradiated at the CERN High Radiation to Materials facility with fluences between 1.2 × 1016 and 4.0 × 1016 protons per square centimetre.Treatment through nitric acid purification followed by controlled twisting and low temperature annealing increased carbon purity to 94–97 atomic percent and reduced aluminium and silicon contamination. All wires showed increased lattice disorder after treatment, with rising AD/AG ratios and G band broadening consistent with reduced graphitic coherence length. Smaller wires accommodated irradiation through distributed bundle sliding, exhibiting moderate expansion of 10–20% and preserved geometry. Larger wires exceeded the threshold for collective bundle slip, developing swelling of up to 40% with pronounced filament relaxation. Treatment stabilised the thinnest wires but intensified deformation in the thickest by raising internal stored strain energy. Iron associated with catalyst residues concentrated locally by nearly 50% after irradiation, consistent with thermally activated diffusion toward defect trapping sites.Radiation tolerance emerges from the coupling between lattice-level defect generation, mesoscale bundle mechanics, and catalyst mobility, a framework not previously established for macroscopic CNT wire architectures at accelerator-representative fluences. These findings offer actionable design principles for wire diameter and treatment selection in beam diagnostic applications, including the High-Luminosity LHC and Future Circular Collider, with broader relevance to nuclear technologies and space systems.