A 28 GHz transceiver chip for 5G beamforming data links in SiGe BiCMOS
Authors:
- 1 October 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 74-77
Abstract
This paper presents a 28-32 GHz transceiver chip architecture in SiGe BiCMOS to meet the requirements of 5G phased-array communication links. An asymmetric design is employed for the transmit and receive paths to deliver an output P1dB of 8 dBm in TX mode and to achieve an input P1dB of 0 dBm in RX mode. The chip can operate with an external LO at 10-16 GHz and 20-28 GHz with the use of an on-chip doubler option. All switches on RF, LO and IF paths are implemented using SiGe HBTs for low loss and wideband operation. An on-chip elliptic filter is implemented in the TX path to reject the upconverted image and LO leakage to meet spectral mask requirements. The chip was tested in the TX mode with an 802.11ad MCS-10 waveform and achieves 3.9% EVM at 3 Gbps physical rate.Keywords
This publication has 4 references indexed in Scilit:
- An ultra low-cost 32-element 28 GHz phased-array transceiver with 41 dBm EIRP and 1.0–1.6 Gbps 16-QAM link at 300 meters2017
- Millimeter-wave beamforming as an enabling technology for 5G cellular communications: theoretical feasibility and prototype resultsIEEE Communications Magazine, 2014
- A 94 GHz, 1.4 dB Insertion Loss Single-Pole Double-Throw Switch Using Reverse-Saturated SiGe HBTsIEEE Microwave and Wireless Components Letters, 2013
- A Bidirectional TX/RX Four-Element Phased Array at 60 GHz With RF-IF Conversion Block in 90-nm CMOS ProcessIEEE Transactions on Microwave Theory and Techniques, 2010