Functional Failure Rate Due to Single-Event Transients in Clock Distribution Networks
Authors:
- 1 April 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Abstract
With technology scaling, lower supply voltages, and higher operating frequencies clock distribution networks become more and more vulnerable to transients faults. These faults can cause circuit-wide effects and thus, significantly contribute to the functional failure rate of the circuit. This paper proposes a methodology to analyse how the functional behaviour is affected by Single-Event Transients in the clock distribution network. The approach is based on logic-level simulation and thus, only uses the register-transfer level description of a design. Therefore, a fault model is proposed which implements the main effects due to radiation-induced transients in the clock network. This fault model enables the computation of the functional failure rate caused by Single-Event Transients for each individual clock buffer, as well as the complete network. Further, it allows the identification of the most vulnerable flip-flops related to Single-Event Transients in the clock network.The proposed methodology is applied in a practical example and a fault injection campaign is performed. In order to evaluate the impact of Single-Event Transients in clock distribution networks, the obtained functional failure rate is compared to the error rate caused by Single-Event Upsets in the sequential logic.Keywords
All Related Versions
This publication has 19 references indexed in Scilit:
- Design Flow for Radhard TMR Flip-Flops2015 Ieee 18th International Symposium On Design and Diagnostics Of Electronic Circuits & Systems (ddecs 2015), 2015
- A Practical Approach to Single Event Transient Analysis for Highly Complex DesignJournal of Electronic Testing, 2013
- Soft-Error Probability Due to SET in Clock Tree Networks2012
- SET susceptibility estimation of clock tree networks from layout extraction2012
- FreePDK: An Open-Source Variation-Aware Design Kit2007
- Radiation-Induced Soft Error Rates of Advanced CMOS Bulk Devices2006
- Radiation-induced clock jitter and race2005
- A systematic approach to SER estimation and solutions2003
- Modeling the effect of technology trends on the soft error rate of combinational logic2003
- Clock distribution networks in synchronous digital integrated circuitsProceedings of the IEEE, 2001