Scanning Electron Microscopy of Carbon Nanotube–Epoxy Interfaces: Correlating Morphology to Sulfate Exposure
Authors:
- Sijan AdhikariSASijan Adhikari
- Braiden M. MyersBMBraiden M. Myers
- Bryce L. TuckBTBryce L. Tuck
- Courtney DawsonCDCourtney Dawson
- Joey R. CiprianoJCJoey R. Cipriano
- Jules F. AhlertJAJules F. Ahlert
- Menziwokuhle ThwalaMTMenziwokuhle Thwala
- Mia A. GriffinMGMia A. Griffin
- Omar YadakOYOmar Yadak
- Osama A. AlfailakawiOAOsama A. Alfailakawi
- Micah S. RitzMRMicah S. Ritz
- Seth M. WrightSWSeth M. Wright
Open Access
- 24 July 2025
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (8) , 392
Abstract
Epoxy resins are widely used as protective coatings in civil infrastructure, yet sulfate-rich environments accelerate their deterioration. This study evaluates the effectiveness of multi-walled carbon nanotubes (MWCNTs) in enhancing the sulfate resistance of epoxy resins. Neat and MWCNT-reinforced epoxy specimens (0.25 wt.% and 0.5 wt.%) were fabricated, heat cured at 100 °C and exposed to a solution of sulfuric acid and sodium chloride maintaining a pH of less than 3 for 0, 30, and 60 days. Analytical techniques, including scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS), revealed distinct degradation patterns: the neat epoxy exhibited puncture damage and extensive salt deposition, while the MWCNT-reinforced specimens showed crack propagation mitigated by nanotube bridging. Heat curing introduced micro-voids that exacerbated sulfate ingress. The salt deposition surged to 200 times for the MWCNT-reinforced specimens compared to the neat ones, whereas crack width was higher in the MWCNT reinforced specimen compared to their neat counterparts, given that crack-bridging was observed. These findings highlight the potential of MWCNTs to improve epoxy durability in sulfate-prone environments, though the optimization of curing conditions and dispersion methods is critical.Keywords
This publication has 37 references indexed in Scilit:
- Multi-walled carbon nanotubes (MWCNTs)-reinforced ceramic nanocomposites for aerospace applications: a reviewJournal of Materials Science, 2021
- A squared bossed diaphragm piezoresistive pressure sensor based on CNTs for low pressure range with enhanced sensitivityMicrosystem Technologies, 2021
- The impact of multi-walled carbon nanotubes (MWCNTs) on macrophages: contribution of MWCNT characteristicsScience China Life Sciences, 2018
- Alkaline electrochemical advanced oxidation process for chromium oxidation at graphitized multi-walled carbon nanotubesChemosphere, 2017
- Effects of different environmental conditions on the mechanical characteristics of a structural epoxyComposites Part B: Engineering, 2016
- Multi-Walled Carbon Nanotubes2013
- Environmental effect on fatigue life of glass–epoxy composite pipes subjected to impact loadingComposites Part B: Engineering, 2013
- Modelling of the carbon nanotube bridging effect on the toughening of polymers and experimental verificationComposites Science and Technology, 2010
- Thermal and Structural Characterizations of Individual Single‐, Double‐, and Multi‐Walled Carbon NanotubesAdvanced Functional Materials, 2009
- The confused world of sulfate attack on concreteCement and Concrete Research, 2004