Seismic Performance of Exposed Column–Base Plate Connections with Ductile Anchor Rods
- 1 May 2022
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 148 (5) , 04022028
Abstract
This paper presents full-scale experiments and computational analyses on exposed column–base plate connections with ductile anchors. The aim is to examine the seismic performance of these connections for their prospective use as weak bases, wherein steel moment frames are designed to concentrate inelastic rotations in the base connections rather than in the connected columns. The connections feature upset thread anchor rods in which the threads are milled to a smooth shank, providing a designated stretch length over which inelastic deformations may be concentrated. The shank is frictionally isolated from the footing using polyethylene tape. The four full-scale experiments investigate the effects of axial force, rod diameter, and rod material grade. The test specimens withstand (without anchor rod failure) the application of two Applied Technology Council–the Joint Venture partners of the Structural Engineers Association of California, the Applied Technology Council, and the Consortium of Universities for Research in Earthquake Engineering (ATC-SAC) protocols applied consecutively (each to drift amplitudes of 5%), followed by additional cycles to 6.5% drift amplitude. Complementary line element–based and continuum finite-element simulations are conducted to examine to what extent the experimentally observed response may be generalized to untested configurations. Implications for design are summarized, along with the limitations of the study.Keywords
This publication has 19 references indexed in Scilit:
- Uniaxial Nonlocal Formulation for Geometric Nonlinearity–Induced Necking and Buckling Localization in a Steel BarJournal of Structural Engineering, 2017
- Investigation of Steel Column–Baseplate Connection Details Incorporating Ductile AnchorsJournal of Structural Engineering, 2017
- Predicting Fracture in Civil Engineering Steel Structures: State of the ArtJournal of Structural Engineering, 2017
- Embedded column base connections subjected to seismic loads: Strength modelJournal of Constructional Steel Research, 2017
- Effects of Detailing on the Cyclic Behavior of Steel Baseplate Connections Designed to Promote Anchor YieldingJournal of Structural Engineering, 2016
- Column Base Connections for Hollow Steel Sections: Seismic Performance and Strength ModelsJournal of Structural Engineering, 2015
- Exposed column base plate connections in moment frames — Simulations and behavioral insightsJournal of Constructional Steel Research, 2013
- Collapse Assessment of Steel Moment Frames Based on E-Defense Full-Scale Shake Table Collapse TestsJournal of Structural Engineering, 2013
- Rotational Stiffness of Exposed Column Base Connections: Experiments and Analytical ModelsJournal of Structural Engineering, 2012
- Cyclic Behavior of Steel Wide-Flange Columns Subjected to Large DriftJournal of Structural Engineering, 2008