Ahmad S. Hassan
Research Subjects
Ahmad S. Hassan has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
Amit Kanvinde
Department of Civil and Environmental Engineering University of California Davis California USA
3 shared publicationsBiao Song
Civil Engineering Institute École Polytechnique Fédérale de Lausanne (EPFL) Lausanne Switzerland
2 shared publications- Carmine Galasso
Department of Civil Environmental and Geomatic Engineering University College London London UK
2 shared publications Amit M. Kanvinde
Professor, Dept. of Civil and Environmental Engineering, Univ. of California, Davis, CA 95616
1 shared publicationArka Maity
Graduate Research Assistant, Dept. of Civil and Environmental Engineering, Univ. of California, Davis, CA 95616
1 shared publication- Laura Giulietti1 shared publication
Latest Publications
- 1 January 2024
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 150 (1)
Seismic Response of Block-Out Column-Base Plate Connections under Axial Compression and Flexure
- 1 January 2024
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 150 (1)
Seismic Response of Block-Out Column-Base Plate Connections under Axial Compression and Flexure
- Open Access
- 7 July 2023
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 52 (12) , 3811-3834
Probabilistic seismic performance assessment of steel moment‐resisting frames considering exposed column‐base plate connections with ductile anchor rods
This paper presents a numerical study assessing the seismic performance of steel moment‐resisting frames (SMRFs) designed with ductile exposed column‐base plate (ECBP) connections employing yielding anchor rods. For their potential use as weak bases, the proposed ECBP detail is designed to accommodate plastic deformations in the anchors. The seismic performance of 2‐ and 4‐story archetype SMRFs with ECBPs is investigated to examine the effects of various base‐connection strengths on the frame collapse mechanisms and probabilities. To this aim, the ECBP connections of each frame are designed for a set of three strength levels, ranging from reduced seismic loads to capacity‐designed forces of the adjoining columns. These designs enable the base responses to vary from highly inelastic (i.e., weak‐base design) to elastic (i.e., strong‐base design) when subjected to earthquake‐induced ground shaking. Nonlinear time history analysis (NLTHA) is extensively performed, applying a suite of assembled ground‐motion sequences (i.e., two ground motions in series) to assess the ECBP connection response and the corresponding frame behavior. Fragility analyses accounting for only the first ground motions in each considered sequence (to derive fragility curves), and the entire ground‐motion sequences (to derive fragility surfaces) are also performed to evaluate the probabilities of frame collapse and base connection failure. Finally, key findings regarding the seismic performance of ductile ECBP connections and their effects on the frame collapse are discussed. The limitations of the study are also outlined.
- 7 July 2023
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 52 (12) , 3811-3834
Open AccessProbabilistic seismic performance assessment of steel moment‐resisting frames considering exposed column‐base plate connections with ductile anchor rods
This paper presents a numerical study assessing the seismic performance of steel moment‐resisting frames (SMRFs) designed with ductile exposed column‐base plate (ECBP) connections employing yielding anchor rods. For their potential use as weak bases, the proposed ECBP detail is designed to accommodate plastic deformations in the anchors. The seismic performance of 2‐ and 4‐story archetype SMRFs with ECBPs is investigated to examine the effects of various base‐connection strengths on the frame collapse mechanisms and probabilities. To this aim, the ECBP connections of each frame are designed for a set of three strength levels, ranging from reduced seismic loads to capacity‐designed forces of the adjoining columns. These designs enable the base responses to vary from highly inelastic (i.e., weak‐base design) to elastic (i.e., strong‐base design) when subjected to earthquake‐induced ground shaking. Nonlinear time history analysis (NLTHA) is extensively performed, applying a suite of assembled ground‐motion sequences (i.e., two ground motions in series) to assess the ECBP connection response and the corresponding frame behavior. Fragility analyses accounting for only the first ground motions in each considered sequence (to derive fragility curves), and the entire ground‐motion sequences (to derive fragility surfaces) are also performed to evaluate the probabilities of frame collapse and base connection failure. Finally, key findings regarding the seismic performance of ductile ECBP connections and their effects on the frame collapse are discussed. The limitations of the study are also outlined.
- 1 May 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 148 (5) , 04022028
Seismic Performance of Exposed Column–Base Plate Connections with Ductile Anchor Rods
This paper presents full-scale experiments and computational analyses on exposed column–base plate connections with ductile anchors. The aim is to examine the seismic performance of these connections for their prospective use as weak bases, wherein steel moment frames are designed to concentrate inelastic rotations in the base connections rather than in the connected columns. The connections feature upset thread anchor rods in which the threads are milled to a smooth shank, providing a designated stretch length over which inelastic deformations may be concentrated. The shank is frictionally isolated from the footing using polyethylene tape. The four full-scale experiments investigate the effects of axial force, rod diameter, and rod material grade. The test specimens withstand (without anchor rod failure) the application of two Applied Technology Council–the Joint Venture partners of the Structural Engineers Association of California, the Applied Technology Council, and the Consortium of Universities for Research in Earthquake Engineering (ATC-SAC) protocols applied consecutively (each to drift amplitudes of 5%), followed by additional cycles to 6.5% drift amplitude. Complementary line element–based and continuum finite-element simulations are conducted to examine to what extent the experimentally observed response may be generalized to untested configurations. Implications for design are summarized, along with the limitations of the study.
- 1 May 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 148 (5) , 04022028
Seismic Performance of Exposed Column–Base Plate Connections with Ductile Anchor Rods
This paper presents full-scale experiments and computational analyses on exposed column–base plate connections with ductile anchors. The aim is to examine the seismic performance of these connections for their prospective use as weak bases, wherein steel moment frames are designed to concentrate inelastic rotations in the base connections rather than in the connected columns. The connections feature upset thread anchor rods in which the threads are milled to a smooth shank, providing a designated stretch length over which inelastic deformations may be concentrated. The shank is frictionally isolated from the footing using polyethylene tape. The four full-scale experiments investigate the effects of axial force, rod diameter, and rod material grade. The test specimens withstand (without anchor rod failure) the application of two Applied Technology Council–the Joint Venture partners of the Structural Engineers Association of California, the Applied Technology Council, and the Consortium of Universities for Research in Earthquake Engineering (ATC-SAC) protocols applied consecutively (each to drift amplitudes of 5%), followed by additional cycles to 6.5% drift amplitude. Complementary line element–based and continuum finite-element simulations are conducted to examine to what extent the experimentally observed response may be generalized to untested configurations. Implications for design are summarized, along with the limitations of the study.
- 1 June 2021
- Published by Elsevier in Engineering Structures
- Vol. 237
Strength characterization of exposed column base plates subjected to axial force and biaxial bending
- 1 June 2021
- Published by Elsevier in Engineering Structures
- Vol. 237
Strength characterization of exposed column base plates subjected to axial force and biaxial bending