Contaminants and levels of occurrence in washed and shredded poly(ethylene terephthalate) from curbside collection. Part 1: Extraction conditions
Authors:
- 1 September 2003
- journal article
- research article
- Published by Taylor & Francis in Food Additives & Contaminants
- Vol. 20 (9) , 859-874
Abstract
The aim was to determine which contaminants were present in washed and dried shredded poly(ethylene terephthalate) (PET, flake) obtained from curbside collection and whether the concentrations were above the US FDA threshold of 215 ppb. Thirty-two semivolatile contaminants were extracted from the treated flake by Soxhlet extraction using dichloromethane as a PET swelling solvent and gas chromatography-mass spectrometry (GC-MS) was used for identification and quantification. Soxhlet extraction of flake ground to 0–300 µm was effectively completed in 24 h, whereas sonication reduced the extraction time to 3 h. In contrast, Soxhlet extractions of flake ground to a larger particle size range (300–425 µm) were completed in 4 h, possibly due to less aggregation in the extraction thimble. The levels of 26 contaminants were below 215 ppb, but six were not. Dodecanoic acid was present at about 1200 ppb, 2-butoxyethanol was approximately 1000 ppb, limonene, benzophenone and methyl salicylate were above 800 ppb, and 2-methylnaphthalene near 215 ppb.Keywords
This publication has 38 references indexed in Scilit:
- Multicomponent recycled plastics: Considerations about their use in food contact applicationsFood Additives & Contaminants: Part A, 1998
- Analysis of antioxidants extracted from polypropylene by supercritical fluid extractionFood Additives & Contaminants, 1998
- Thermal stability of polyethylene terephthalate food contact materials: Formation of volatiles from retail samples and implications for recyclingFood Additives & Contaminants: Part A, 1998
- Validation studies of a quick test for predicting the sorption and washing properties of refillable plastic bottlesFood Additives & Contaminants, 1997
- Methods and approaches used by FDA to evaluate the safety of food packaging materialsFood Additives & Contaminants: Part A, 1997
- Migration of residual contaminants from secondary recycled poly(ethylene terephthalate) into food‐simulating solvents, aqueous ethanol and heptaneFood Additives & Contaminants, 1997
- Evaluating organic compound migration in poly(ethylene terephthalate): A simple test with implications for polymer recyclingFood Additives & Contaminants, 1996
- Determination of benzene residues in recycled polyethylene terephthalate (PETE) by dynamic headspace‐gas chromatographyFood Additives & Contaminants, 1994
- Extraction and Quantitation of Polyolefin AdditivesJournal of Liquid Chromatography, 1991
- The determination of light stabilisers in plastics by high-performance liquid chromatographyAnalytica Chimica Acta, 1983