Edward Kosior
Research Subjects
Research Interests
Edward Kosior has a total of 90 co-authors. Here are the top co-authors by number of shared publications:
F. Cser
Rheology and Materials Processing Centre
6 shared publicationsIgor Sbarski
4 shared publications- Fugen Daver
School of Engineering RMIT University Bundoora Victoria Australia
3 shared publications - George Philip Simon
Department of Materials Science and Engineering, Monash University, Clayton, Victoria, AUSTRALIA
3 shared publications Pio Iovenitti
IRIS Swinburn University, PO Box 218, Hawthorn, 3122, Australia
3 shared publications- Satinath N. Bhattacharya
Rheology and Materials Processing Centre, School of Civil, Environmental and Chemical Engineering, RMIT University, Melbourne, Victoria 3001, Australia
3 shared publications
Latest Publications
- Top Cited Papers
- 18 September 2020
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 369 (6510) , 1455-1461
Evaluating scenarios toward zero plastic pollution
A mess of plastic: It is not clear what strategies will be most effective in mitigating harm from the global problem of plastic pollution. Borrelle et al. and Lau et al. discuss possible solutions and their impacts. Both groups found that substantial reductions in plastic-waste generation can be made in the coming decades with immediate, concerted, and vigorous action, but even in the best case scenario, huge quantities of plastic will still accumulate in the environment. Science , this issue p. 1515 , p. 1455
- 18 September 2020
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 369 (6510) , 1455-1461
Top Cited PapersEvaluating scenarios toward zero plastic pollution
A mess of plastic: It is not clear what strategies will be most effective in mitigating harm from the global problem of plastic pollution. Borrelle et al. and Lau et al. discuss possible solutions and their impacts. Both groups found that substantial reductions in plastic-waste generation can be made in the coming decades with immediate, concerted, and vigorous action, but even in the best case scenario, huge quantities of plastic will still accumulate in the environment. Science , this issue p. 1515 , p. 1455
- 1 November 2014
- Published by Elsevier in Waste Management
- Vol. 34 (11) , 2113-2119
Recycling disposable cups into paper plastic composites
- 1 November 2014
- Published by Elsevier in Waste Management
- Vol. 34 (11) , 2113-2119
Recycling disposable cups into paper plastic composites
- Top Cited Papers
- 27 July 2009
- Published by The Royal Society in Philosophical Transactions of the Royal Society B: Biological Sciences
- Vol. 364 (1526) , 2115-2126
Plastics recycling: challenges and opportunities
Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3–4% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it may be possible to divert the majority of plastic waste from landfills to recycling over the next decades.
- 27 July 2009
- Published by The Royal Society in Philosophical Transactions of the Royal Society B: Biological Sciences
- Vol. 364 (1526) , 2115-2126
Top Cited PapersPlastics recycling: challenges and opportunities
Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3–4% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it may be possible to divert the majority of plastic waste from landfills to recycling over the next decades.
- 1 August 2008
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 204 (1-3) , 397-402
Rheological characterisation of recycled poly(ethylene terephthalate) modified by reactive extrusion
- 1 August 2008
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 204 (1-3) , 397-402
Rheological characterisation of recycled poly(ethylene terephthalate) modified by reactive extrusion
- 19 January 2008
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 47 (15) , 5175-5181
Catalytic Degradation of High-Density Polyethylene in a Reactive Extruder
- 19 January 2008
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 47 (15) , 5175-5181
Catalytic Degradation of High-Density Polyethylene in a Reactive Extruder
- 1 January 2007
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 27 (1) , 55-74
THERMAL AND MELT RHEOLOGICAL BEHAVIOUR OF COMPOSITES PRODUCED FROM WASTE PAPER AND PLASTIC
- 1 January 2007
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 27 (1) , 55-74
THERMAL AND MELT RHEOLOGICAL BEHAVIOUR OF COMPOSITES PRODUCED FROM WASTE PAPER AND PLASTIC
- 14 December 2006
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 40 (2) , 265-272
Molecular Level Stabilization of Poly(ethylene terephthalate) with Nanostructured Open Cage Trisilanolisobutyl-POSS
- 14 December 2006
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 40 (2) , 265-272
Molecular Level Stabilization of Poly(ethylene terephthalate) with Nanostructured Open Cage Trisilanolisobutyl-POSS
- Open Access
- 1 February 2006
- Published by SAGE Publications in Progress in Rubber, Plastics and Recycling Technology
- Vol. 22 (1) , 1-21
Contaminants and their Levels of Retention in Extruded, Recycled Poly(Ethylene Terephthalate) from Curbside Collection. Part 1: Extraction Kinetics and Particle Size Effects
In the first phase of our studies of the contaminants and their levels in curbside-collected poly(ethylene terephthalate) (PET) subjected to a recycling process, we analysed the washed and dried, shredded PET (flake). Of the semi-volatile contaminants found, 26 were below the US FDA threshold of 215 ppb and six were above. Additionally, it was found that surface levels of contaminants far exceeded average concentrations in the bulk of the flake, raising questions about the appropriateness of sampling procedures. In this second phase (again using dichloromethane Soxhlet extractions for the most part), we examined contaminant levels after the flake was subjected to vacuum extrusion, to complete the recycling process. Initially amorphous, extruded pellets were annealed to introduce crystallinity and allow grinding, in order to examine the effect of particle size. Much reduced concentrations of contaminants were found (all 300-425 μm and >425-700 μm), approximately 8 h were required for the unground annealed pellets.
- 1 February 2006
- Published by SAGE Publications in Progress in Rubber, Plastics and Recycling Technology
- Vol. 22 (1) , 1-21
Open AccessContaminants and their Levels of Retention in Extruded, Recycled Poly(Ethylene Terephthalate) from Curbside Collection. Part 1: Extraction Kinetics and Particle Size Effects
In the first phase of our studies of the contaminants and their levels in curbside-collected poly(ethylene terephthalate) (PET) subjected to a recycling process, we analysed the washed and dried, shredded PET (flake). Of the semi-volatile contaminants found, 26 were below the US FDA threshold of 215 ppb and six were above. Additionally, it was found that surface levels of contaminants far exceeded average concentrations in the bulk of the flake, raising questions about the appropriateness of sampling procedures. In this second phase (again using dichloromethane Soxhlet extractions for the most part), we examined contaminant levels after the flake was subjected to vacuum extrusion, to complete the recycling process. Initially amorphous, extruded pellets were annealed to introduce crystallinity and allow grinding, in order to examine the effect of particle size. Much reduced concentrations of contaminants were found (all 300-425 μm and >425-700 μm), approximately 8 h were required for the unground annealed pellets.
- 19 January 2006
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 99 (6) , 3328-3335
Molecular morphology of petaloid bases of PET bottles: A small‐angle X‐ray scattering study
Small‐angle X‐ray scattering (SAXS) studies were undertaken to explore possible morphological explanations for poor mechanical strength in the petaloid bases of poly(ethylene terephthalate) (PET) bottles. The bottles were manufactured using a two‐stage injection stretch blow molding process. Splitting of PET bottle bases under load is both inconvenient and expensive. In this study, SAXS data were collected with a 100 μm square X‐ray beam to establish the molecular morphology as a function of position across the base topology. An amorphous region was identified in the base center (i.e., close to the injection gate of the preform) with biaxially orientated, semicrystalline regions in the feet and valleys of the bottle bases. For bottles that had split under load, the transition between these two regions displayed uniaxial orientation that would lead to reduced mechanical strength in the circumferential direction. Reasons for this effect are explored. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3328–3335, 2006
- 19 January 2006
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 99 (6) , 3328-3335
Molecular morphology of petaloid bases of PET bottles: A small‐angle X‐ray scattering study
Small‐angle X‐ray scattering (SAXS) studies were undertaken to explore possible morphological explanations for poor mechanical strength in the petaloid bases of poly(ethylene terephthalate) (PET) bottles. The bottles were manufactured using a two‐stage injection stretch blow molding process. Splitting of PET bottle bases under load is both inconvenient and expensive. In this study, SAXS data were collected with a 100 μm square X‐ray beam to establish the molecular morphology as a function of position across the base topology. An amorphous region was identified in the base center (i.e., close to the injection gate of the preform) with biaxially orientated, semicrystalline regions in the feet and valleys of the bottle bases. For bottles that had split under load, the transition between these two regions displayed uniaxial orientation that would lead to reduced mechanical strength in the circumferential direction. Reasons for this effect are explored. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3328–3335, 2006
- 1 January 2006
- Published by Wiley in Developments in Chemical Engineering and Mineral Processing
- Vol. 14 (1-2) , 203-218
Degradation of Low‐Density Polyethylene over Modified Zeolites
- 1 January 2006
- Published by Wiley in Developments in Chemical Engineering and Mineral Processing
- Vol. 14 (1-2) , 203-218
Degradation of Low‐Density Polyethylene over Modified Zeolites