Microstructure and mechanical properties of 2060 Al–Li alloy welded by alternating current cold metal transfer with high-frequency pulse current
Open Access
- 1 January 2021
- journal article
- research article
- Published by Walter de Gruyter GmbH in High Temperature Materials and Processes
- Vol. 40 (1) , 214-227
Abstract
Al–Li alloy has been widely used in the aerospace field owing to its high strength and low density. In this study, alternating current cold metal transfer (AC CMT) along with a high-frequency pulse current technique was used to weld a 2060 Al–Li alloy using an ER5356 wire. The effect of pulse frequency on the arc shape, microstructure, and mechanical properties of the welded joints was examined, and mechanical performance testing was conducted. The results revealed that the arc diameter, arc length, and arc volume showed a trend of increasing first and then decreasing with an increase in the pulse frequency and reached their peak values when the pulse frequency was 50 kHz. Coupling the welding process with a high-frequency pulse resulted in grain refinement, which was attributed to the stirring action of the arc force. Both the porosity levels and grain size decreased with increasing frequency. When the pulse frequency was 70 kHz, the porosity level was the lowest, and the grain size was refined to 24.1 μm. The tensile strength of the welded joints also increased with the pulse frequency, and a maximum tensile strength of 249 MPa was observed at 70 kHz.Keywords
This publication has 34 references indexed in Scilit:
- Effect of Laser Welding on Properties of Dissimilar Joint of Al-Mg-Si and Al-Mn Aluminum AlloysJournal of Materials Science & Technology, 2010
- The CMT short-circuiting metal transfer process and its use in thin aluminium sheets weldingMaterials & Design (1980-2015), 2009
- Thin sheet welding of Al 6082 alloy by AC pulse-GMA and AC wave pulse-GMA weldingMaterials & Design (1980-2015), 2009
- Joining of Steel to Aluminum Alloy by AC Pulse MIG WeldingMATERIALS TRANSACTIONS, 2009
- Study of friction stir welding of 01420 aluminum–lithium alloyMaterials Science and Engineering: A, 2007
- Progress in structural materials for aerospace systems11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh.Acta Materialia, 2003
- Effects of low-frequency electromagnetic field on microstructures and macrosegregation of continuous casting 7075 aluminum alloyMaterials Science and Engineering: A, 2003
- Effect of low-frequency magnetic field on macrosegregation of continuous casting aluminum alloysMaterials Letters, 2003
- A model for equiaxed grain formation along the weld metal fusion lineScripta Materialia, 1999
- Modification of solidification structures by pulse electric discharging.ISIJ International, 1990