Plug-and-play 3D-printed modular microchannel heat sinks for efficient microelectronic chip cooling
- 13 November 2025
- journal article
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 35 (11) , 115007
Abstract
The increasing thermal loads in modern microelectronic devices necessitate the development of compact and efficient cooling solutions. This study introduces an innovative design and fabrication method for modular microchannel heat sinks that eliminates the need for conductive pastes, utilizing conventional 3D printing technology. Two geometrical configurations, U-turn mini-channels with straight and wavy arm designs, were developed on transparent PMMA substrates, sealed with a 60 μ m TPU membrane to ensure thermal reliability and prevent direct fluid contact with the chip surface. The modular design allows for easy replacement, low-cost production, and adaptability to various thermal scenarios. Thermal and hydraulic performance were experimentally evaluated using water as the working fluid under laminar flow conditions with different volumetric flow rates (200–1000 µ l min −1 ). Key performance metrics included pressure drop, outlet fluid temperature, average Nusselt number, thermal resistance, and performance factor. Results showed that the straight arm design consistently outperformed the wavy arm design in terms of thermal resistance and heat transfer efficiency, with up to a 31% reduction in thermal resistance at higher flow rates. The straight configuration also maintained a higher Nusselt number and performance factor ( η > 1), indicating superior thermo-hydraulic performance. In contrast, the wavy arm design, while enhancing mixing, suffers from higher pressure drops and lower overall efficiency ( η < 1).Keywords
This publication has 61 references indexed in Scilit:
- Enhancing electronic system cooling: exploring minichannel heat sink solutionsJournal of Thermal Analysis and Calorimetry, 2025
- Additive manufacturing for producing microchannel heat sinksProgress in Additive Manufacturing, 2024
- Fabrication, experimentation and numerical simulation of micro channel heat sink for enhancing thermal performance of electronic devicesInternational Journal on Interactive Design and Manufacturing (IJIDeM), 2023
- Electroosmotic flow in fused deposition modeling (FDM) 3D‐printed microchannelsElectrophoresis, 2022
- Numerical simulation of heat transfer and flow of Al2O3-water nanofluid in microchannel heat sink with cantor fractal structure based on genetic algorithmAnalytica Chimica Acta, 2022
- 3D printed microfluidic mixer for real-time monitoring of organic reactions by direct infusion mass spectrometryAnalytica Chimica Acta, 2022
- Experimental study on micro-encapsulated phase change material slurry flowing in straight and wavy microchannelsApplied Thermal Engineering, 2021
- Development of an additive manufacturing-enabled compact manifold microchannel heat exchangerApplied Thermal Engineering, 2019
- A Review on efficient thermal management of air- and liquid-cooled data centers: From chip to the cooling systemApplied Energy, 2017
- An experimental and numerical investigation of the use of liquid flow in serpentine microchannels for microelectronics coolingApplied Thermal Engineering, 2017