Abstract
This paper presents a pipelined FPGA implementation of the AES algorithm in the Counter (CTR) mode, specifically optimized for underwater RGB image encryption and decryption. Underwater imaging often suffers from limited bandwidth, so it requires secure transmission in real-time applications. These applications include, but are not limited to, autonomous underwater vehicles (AUVs) and remotely operated vehicles (ROVs). The proposed design achieves high throughput while maintaining low latency. By utilizing a multistage pipeline architecture implemented in Verilog, four pipeline configurations were developed and evaluated, ranging from a non-pipelined baseline to a fully pipelined design. The non-pipelined implementation achieves 1.16 Gb/s with 3106 LUTs and 2193 FFs. Moreover, the 2-stage and 6-stage versions reach 2.56 Gb/s and 6.40 Gb/s, respectively, while the fully pipelined implementation attains 12.80 Gb/s at a clock frequency of 100 MHz, utilizing 6403 LUTs and 2943 FFs. These results demonstrate the efficiency of deep pipelining and provide a favourable balance between performance and resource utilization compared to prior AES implementations.
Funding Information
  • Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (121C126)

This publication has 18 references indexed in Scilit: