Parametric Optimization of Wire Electrical Discharge Machining in AA7075 Metal Matrix Composite
Open Access
- 24 June 2022
- journal article
- research article
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2022, 1-8
Abstract
Aluminium 7075 metal matrix composite reinforced with silicon nitride was fabricated using the stir casting technique. Composite fabricated was machined and subjected to wire electrical discharge machining to study the significant process parameter. Taguchi design of experiment using L9 orthogonal array was selected with three factors, current, pulse ON time, and wire feed at three levels. Influencing process parameters were identified using analysis of variance. Pulse ON time of 130μs, current of 20A, and wire feed of 1mm/min were identified as optimized parameters for higher material removal rate. For a good surface finish, the optimized parameter was identified as 130μs pulse ON time, 20A current, and wire feed rate of 2mm/min. Pulse ON time was identified as an influencing parameter followed by the current in achieving better material removal rate with good surface finish, whereas wire feed has no influence on the output parameters. Results of experimentation showed improved machining characteristics for higher pulse ON time and current for machining the synthesized composite through the Taguchi design of the experiment.Keywords
This publication has 24 references indexed in Scilit:
- Modeling of Process Parameters for Surface Roughness and Analysis of Machined Surface in WEDM of Al/SiC-MMCTransactions of the Indian Institute of Metals, 2017
- 1.9 Effect of Electrical Discharge Energy on White Layer Thickness of WEDM Process2017
- A Study on Machining Characteristics of Al6061-Sic Metal Matrix Composite through Wire – Cut Electro Discharge MachiningMaterials Today: Proceedings, 2017
- Semi-empirical Modeling of Surface Roughness in Wire Electro-discharge Machining of Ceramic Particulate Reinforced Al Matrix CompositesProcedia CIRP, 2016
- Effect of Wire EDM Cutting Parameters for Evaluating of Additive Manufacturing Hybrid Metal MaterialProcedia Manufacturing, 2015
- Modeling and optimization of Al/SiCp MMC machining using Taguchi approachMeasurement, 2013
- Analysis of Process Parameters in Wire EDM with Stainless Steel Using Single Objective Taguchi Method and Multi Objective Grey Relational GradeProcedia Engineering, 2013
- Reliable multi-objective optimization of high-speed WEDM process based on Gaussian process regressionInternational Journal of Machine Tools and Manufacture, 2008
- An investigation on effects of wire-EDM machining parameters on surface roughness of newly developed DC53 die steelJournal of Materials Processing Technology, 2007
- Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi methodThe International Journal of Advanced Manufacturing Technology, 2006