Optimization of the Cathodic Protection Design in Consideration of the Temperature Variation for Offshore Structures
Authors:
- 9 August 2017
- journal article
- research article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 74 (1) , 123-133
Abstract
The temperature effect on the current density which closely related to cathodic protection (CP) design was examined using electrochemical tests. A case study of an optimized CP design for the floating production storage and offloading using a computational analysis tool was also performed. The electrochemical test results showed that the current density and the surface resistance of the specimen (EH36) at 28°C are lower and higher, respectively, compared with the 5°C condition; this phenomenon is the result of a calcareous deposit that was verified by scanning electron microscopy and energy dispersive x-ray spectroscopy surface analyses. The polarization curves which contained the effect of calcareous deposits according to the temperature were used as the computational analysis input data. The simulation results showed that the structure under the 5°C condition did not satisfy the CP criteria (−800 mVSCE to −1,050 mVSCE) at the bottom shell and the mooring chain. It had higher potential than −800 mVSCE. Although the structure at 28°C satisfied the protective potential range, it was sufficiently unstable for the prediction of the corrosion damage. To optimize and resolve the identified problems, the CP design was changed by CP methods, anodes quantities, and anodes distribution. Consequently, the structure at 5°C is sufficient for the satisfaction of the protective-potential criteria (< −800 mVSCE) at the bottom shell and the mooring chain. In the case of the structure at 28°C, a more-even potential distribution was achieved.Keywords
This publication has 26 references indexed in Scilit:
- A study of oil and natural gas resources and productionInternational Journal of Energy Sector Management, 2011
- Cathodic protection by zinc sacrificial anodes: Impact on marine sediment metallic contaminationJournal of Hazardous Materials, 2009
- Pitting corrosion and structural reliability of corroding RC structures: Experimental data and probabilistic analysisReliability Engineering & System Safety, 2008
- Characterisation of calcareous deposits by electrochemical methods: role of sulphates, calcium concentration and temperatureElectrochimica Acta, 2004
- Laboratory and Field Characterization of a New Sacrificial Anode for Cathodic Protection of Offshore StructuresCorrosion, 1998
- Sacrificial Anode Cathodic Polarization of Steel in Seawater: Part 2 — Design and Data AnalysisCorrosion, 1998
- Sacrificial Anode Cathodic Polarization of Steel in Seawater: Part 1 — A Novel Experimental and Analysis MethodologyCorrosion, 1996
- Influence of Cathodic Protection Parameters on Calcareous Deposit FormationCorrosion, 1988
- Influence of Temperature and Exposure Time Upon Calcareous DepositsCorrosion, 1987
- Current density required for cathodic protectionJournal of Chemical Technology & Biotechnology, 1965